Table of Contents
Advertisement
Quick Links
Scan the barcode or click the link to
watch the video installation guide.
HK3-C Hardwire Kit
( Compatible with: VIOFO A139 Dash Camera )
https://www.viofo.com/en/blog/how-to-hard-
wire-viofo-dash-cam-with-hk3-hardwire-kits-b57.html
USER MANUAL
The user manual is available on
https://support.viofo.com
2022 VIOFO Ltd. All Rights Reserved.
Copyright
C
Advertisement
Table of Contents
Summary of Contents for Viofo HK3-C Hardwire Kit
- Page 1 Scan the barcode or click the link to watch the video installation guide. HK3-C Hardwire Kit ( Compatible with: VIOFO A139 Dash Camera ) https://www.viofo.com/en/blog/how-to-hard- wire-viofo-dash-cam-with-hk3-hardwire-kits-b57.html USER MANUAL The user manual is available on https://support.viofo.com 2022 VIOFO Ltd. All Rights Reserved.
- Page 2 HK3-C Hardwire Kit Features The HK3-C Hardwire Kit provides permanent power to the USB Type-C Battery (+) Adapters Hardwire box Ferrite Ring Core Plug dashcam for the parking recording function. The ACC (Red) detection function will switch the dash camera into parking...
- Page 3 Installation steps Locate a Ground point To identify a suitable ground point, use circuit tester in Make sure the engine is off and accessory power is off before continuity mode. Locate a screw with direct connection to proceeding. the vehicle body and check for a good continuity reading between the screw and the vehicle body, this should be <...
- Page 4 (Red, Yellow and Black), plug the hardwire kit into the camera, then start the vehicle to check that it works. Also check the camera parking mode settings in the Viofo app. Note: We recommend you test that the hardwire kit and...
Need help?
Do you have a question about the HK3-C Hardwire Kit and is the answer not in the manual?
Questions and answers