Advertisement
Quick Links
Advanced Rider Assistant
Supplementary Manual
Triumph Daytona 675 2006-2012 (ARA-1 + ARA-K4A + ARA-D21)
Secure the bike on a stand.
Remove the seats.
Remove the fuel tank and the airbox.
Locate the ignition coil connectors under
the airbox.
Plug the ARA connectors in-line with the
ignition coil connectors.
(Make sure the ARA plugs marked with RED
square are connected, and leave one
coupler unused)
w w w . h e a l t e c h - e l e c t r o n i c s . c o m
1/4
Advertisement
Related Manuals for HealTech Electronics Advanced Rider Assistant
Summary of Contents for HealTech Electronics Advanced Rider Assistant
- Page 1 Advanced Rider Assistant Supplementary Manual Triumph Daytona 675 2006-2012 (ARA-1 + ARA-K4A + ARA-D21) Secure the bike on a stand. Remove the seats. Remove the fuel tank and the airbox. Locate the ignition coil connectors under the airbox. Plug the ARA connectors in-line with the ignition coil connectors.
- Page 2 Advanced Rider Assistant Supplementary Manual Triumph Daytona 675 2006-2012 (ARA-1 + ARA-K4A + ARA-D21) Connect the ARA Black wire terminal to the battery negative terminal. Use the supplied washer between the holder bracket and the mudguard. Mount the supplied disk and wheel speed sensor at the front wheel.
- Page 3 Advanced Rider Assistant Supplementary Manual Triumph Daytona 675 2006-2012 (ARA-1 + ARA-K4A + ARA-D21) Splice the ARA Green wire to the Pink/Yellow wire of the speed sensor connector. Connect the 3-pole front wheel speed sensor connector to the ARA wiring.
- Page 4 Advanced Rider Assistant Supplementary Manual Triumph Daytona 675 2006-2012 (ARA-1 + ARA-K4A + ARA-D21) Typical position for the ARA module. Secure the unit properly. w w w . h e a l t e c h - e l e c t r o n i c s . c o m...