Advertisement
Advertisement
Table of Contents
Related Manuals for DD-EFI Pro Expansion Module
Summary of Contents for DD-EFI Pro Expansion Module
- Page 1 Pro Expansion Module Quickstart Guide...
- Page 2 You will need to delete your old Project and replace it with the one that we provided to you. If you need assistance in this step please do contact support@dd-efi.com If you did NOT, please contact support@dd-efi.com to complete this step of the setup and configuration process.
- Page 3 I/O Connectors The DD-EFI Pro Dash has (2) I/O Connectors for Sensors and Digital Inputs. Below are diagrams outlining what each Pins location, function, and wire color in the 12 Pin and 10 Pin black connectors. Provided: Sensor and Digital Wiring...
- Page 4 Default internal jumper set to 12V o Removal of the back cover to access jumpers • Digital Inputs 1, 2 & 3 - pre-configured in DD-EFI Dashboards for o Provided T-Tap Wire Connector(s) for easy connection o Left Turn Signal - Digital Input 1 o Right Turn Signal - Digital Input 2 o High Beam –...
- Page 5 If you have any questions regarding warranty, please contact support at Digital Dash EFI LLC at support@dd-efi.com. WARNING: California’s Proposition 65 requires that a clear and visible warning be provided to consumers in California that have the potential to expose them to various substances which may cause cancer, birth defects or other reproductive harm.
Need help?
Do you have a question about the Pro Expansion Module and is the answer not in the manual?
Questions and answers