DF250RTR Assembly Guide Table of content 1. Remove Cardboard Box 2. Remove Metal Crate 3. Layout all parts 4. Install Handlebar 5. Attach Speedometer Assembly 6. Attach Left Side Combination Switch 7. Attach Left Side Clutch Lever Assembly 8. Remove Front wheel shaft from the crate 9.
Page 24
To remove the front wheel shaft from the crate, the easy method is to 1 shift the rear wheel out of the frame. 2 form the kick stand in active position just like in the picture. 3 Tilt the crate towards to the kick stand side with a help of another person and hold it in the tilted position and now you can remove the front wheel shaft much easier.
Page 25
Tilt the frame to the side shown in picture...
Need help?
Do you have a question about the DF250RTR and is the answer not in the manual?
Questions and answers