Advertisement
Quick Links
Advertisement
Related Manuals for Rack Pool Tables T401G
Summary of Contents for Rack Pool Tables T401G
- Page 1 RACK LUXOR 7.5-FOOT 4-IN-1 MULTI-GAME SWIVEL BILLIARD/POOL TABLE-GREEN FELT WITH BROWN BODY T401G...
- Page 4 RACK LUXOR 7.5-FOOT 4-IN-1 MULTI-GAME SWIVEL BILLIARD/POOL TABLE ASSESSORISS 1 piece 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 1 piece 1 piece 2 pieces 2 pieces 1 piece HARDWARE 8 pieces 1 piece 36 pieces 24 pieces 8 pieces 16 pieces...
- Page 5 2. Lay the box on a flat surface (the floor). You may want this near your area of assembly. 3. If any parts are missing please contact RACK POOL TABLES immediately. 4. Note that some parts are stored inside the table top.
-
Page 6: Assembly Parts
DISTRIBUTION DIAGRAM OF ALL THE PARTS ASSEMBLY PARTS Table Body Air Hockey Playsurface 1 piece 1 piece 4 pieces 4 pieces 2 pieces 1 piece Locker Rotational Bolt Air Blower Pre-Installed Pre-Installed Pre-Installed Pre-Installed 4 pieces 4 pieces 2 pieces 2 pieces 6 pieces 1 piece... -
Page 7: Assembly View
ASSEMBLY VIEW... - Page 8 Lift the air hockey table top off the pool table & Keep it aside safe for the time being, be careful not to damage the fan motor. Remove all accessories and boxes from the inside of the pool table cabinet.
- Page 9 Attach the Leg B ( #3) to the Leg A ( #2) using the Screw ( #28) as shown Attach the Leg Base Board (#14) to the bottom of the leg using the Screw (#27) as shown The nut for leg leveler is on this side...
- Page 10 Attch the 4 assembled legs to the corners of the Table Body (#1) using the Bolt (#30) and Washer (#31). Attach the Leg Leveler (#13) to the bottom of the leg as shown. Place it in the ground in such a way that all the 4 legs hit the ground at the same time to avoid damages...
- Page 11 Unlock the Switch and rotate the table so that the cross-support beam faces up. Unlock Lock the table If the locks are not working properly, please lift the corner of the table body (#1) from the corners gently with your hand so that the table can be locked easily.
- Page 12 Now replace the air hockey table top back onto the table frame and at the same time thread the fan motor cable through the pre drilled hole located on the cross-support beam and carefully connect the connectors 11C & 11B as shown. Thread the fan motor cable (11C) through the pre drilled hole located on the cross-support beam.
- Page 13 Carefully replace the air hockey table top back onto the table frame. Keep the table locked...
- Page 14 Please unlock the table and rotate the table cabinet a little, and attach the air hockey table top to the pool table cabinet by using the screw (#27). Unlock...
- Page 15 Rotate the air hockey table to attach the other side to the pool table cabinet by using the Screw ( #27) as shown Keep the table unlocked...
- Page 16 Plug the fan motor cable #11a to the connector in the side panel when you are playing the air hockey table. Lock the table If the locks are not working properly, please lift the corner of the table body (#1) from the corners gently with your hand so that the table can be locked easily.
- Page 17 Please first unplug the fan motor cable (#11a) and unlock the table when you want to rotate the air hockey table to change it to pool table. Unlock Unplug...
- Page 18 Now that you have completed the assembly successfully, you can now enjoy hours of endless fun with your new RACK 4 - in - 1 Table If the locks are not working properly, please lift the corner of the table body (#1) from the corners gently with your hand so that the table can be locked easily.
- Page 19 Place the Table Tennis Top ( 4A & 4B) onto the pool table using the Top Alignment Pin (#12) and the table tennis top support board (#5) placed underneath. Install the Net Posts (#16) and Net (#15). See Step 11 and Step 12. Place 6 PCS EVA Pads (#10) as shown for table tennis flatness purpose if required.
- Page 21 Important Safety Operating Instructions 1. Caution - this table is not a toy & is intended for use by or under the supervision of adults. Adults should review safety guidelines with children to avoid possible risk of electric shock or other injuries. 2.