Flow 836 ONT Installation Manual

GET TO KNOW
YOUR EQUIPMENT
836 ONT
Ethernet ports 1 – 4
Ethernet port 1 is provisioned
for the delivery of the internet
service while Ethernet ports
2-4 are provisioned for the
delivery of the IPTV service.
844 ONT
Ethernet ports 1 – 4
Ethernet port 1 is provisioned
for the delivery of the internet
service while Ethernet ports
2-4 are provisioned for the
delivery of the IPTV service.
SET TOP BOX
a. Power Indicator
b. SIM card
c. CABLE IN (Coaxial)
d. A/V OUT
e. USB port
f. HDMI port
g. IR input
h. ETHERNET port
i. Power cable connector
j. USB port
c
1.
The FLOW Set Top Box has no power
Ensure the power cable is connected securely to the Set
FRONT
Top Box and to the power source.
2.
The FLOW Set Top Box LED stays red
Press the power button on the FLOW Remote or unplug
and reconnect the power cable.
3.
BACK
My television says "No signal"
Ensure the HDMI or RCA/AV cable is connected
securely to the Set Top Box and to your television.
IPTV Ports
Ensure your television is on the correct source input.
4.
My television says "Connection Problem, Please
FRONT BACK
ensure all cables are connected"
Ensure the Ethernet cable is connected securely to lan
2, 3 or 4 on the ONT and to the Set Top Box. If the
problem persist, please contact Customer Care at
IPTV
1-800-804-2994.
Ports
5.
Channels are not loading
Reboot the Set Top Box by unplugging and reconnecting
the power cable. If the problem persist, please contact
Customer Care at 1-800-804-2994.
6.
My Television says "DRM License error"
FRONT
Try navigating to channel 127 using the FLOW remote
or select any channel from the EPG/Guide menu OR
you can reboot the Set Top Box by unplugging and
j
b a
reconnecting the power cable. If the problem persists,
BACK
please contact customer care at 1-800-804-2994.
e
d f g h i
TROUBLESHOOTING
discoverflow.co/barbados/tvselfinstall
SET TOP BOX
INSTALLATION GUIDE