Table of Contents
Advertisement
Quick Links
OPERATING AND INSTALLATION
INSTRUCTIONS
round burner > Bioethanol Safety Burner
Congratulations on your purchase of the muenkel design round burner. We thank you for choosing one of our
branded products. In the following, we introduce you to the round burner and give you an instruction. Please
read the instructions carefully. Afterwards we wish you a lot of fun and comfortable hours with the operation
of your bio ethanol fireplace.
Content of delivery
✓ Adjustable safety burner "round burner" made of stainless steel incl. glass cylinder
✓
Control slide
✓ Glow indicator
✓ Instructions for installation and operation
MANUAL: installation and operation of the „round
burner"
Seite 1 von 6
Advertisement
Table of Contents
Related Manuals for muenkel design round burner
Summary of Contents for muenkel design round burner
- Page 1 > Bioethanol Safety Burner Congratulations on your purchase of the muenkel design round burner. We thank you for choosing one of our branded products. In the following, we introduce you to the round burner and give you an instruction. Please read the instructions carefully.
- Page 2 Installation 1. The safety burner may only be installed and rebuilt with non-flammable material (e.g. stainless steel, concrete, fire protection boards, ceramics, bricks, stone, etc.) 2. The materials used must be suitable for large temperature fluctuations (e.g. heat-resistant glass), otherwise they may be damaged. 3.
- Page 3 Important installation instructions 1. The front must be open to allow the heat to escape. The installation behind a closed glass pane ((e.g. existing fireplace with glass door) may only be carried out after prior agreement. 2. A distance of at least 100 cm from combustible materials must be guaranteed on all open sides. 3.
- Page 4 Fill and refill 1. Observe the following "Notes on filling". 2. Remove the glass cylinder and the control slide. You can use a clean funnel as an aid. 3. Fill the safety burner by slowly and carefully pouring bioethanol into the incineration slot. You can use a clean funnel as an aid.
- Page 5 Ignition process 1. Observe the following „Notes on the ignition process“. 2. Remove the control slide. 3. Fill the combustion chamber with ethanol to the maximum level. 4. Wait at least 30 seconds. 5. Ignite the fireplace by placing a burning rod lighter on the combustion chamber. 6.
- Page 6 More information Notes on the device • The purchased device is a decorative outdoor or indoor fireplace, which is not intended for heating purposes. • Do not allow water to get into the burner. Protect from rainwater. • The device is not suitable for continuous operation. •...
Need help?
Do you have a question about the round burner and is the answer not in the manual?
Questions and answers