Page 9
Fn+Z=BT1. Press and hold for 3 seconds, the red and blue lights flash alternately, and the Bluetooth is in the pairing state. If paired already, tap again to reconnect. Fn+X=BT2. Press and hold for 3 seconds, the red and blue lights flash alternately, and the Bluetooth is in the pairing state.
Page 10
FN+O=Pause FN+J=Insert FN+K=Home FN+M=Delete FN+<,=End FN+L=Page Up FN+;:=Light effect to the left FN+>.=Page Down (some dynamic lighting effects support) FN+’ ” =light effect to the right (some dynamic lighting effects support) FN+}]=software light switch FN+right shift=open driver/close driver (user can change it through driver) Fn+Tab=Restore the keyboard to factory settings (press and hold for 5 seconds)
Page 11
FN+|\=Hardware light switch FN+↑=Increase the brightness of the light (the ↑ key after the fourth gear is adjusted to the highest gear, the red light flashes three times) FN+↓=The brightness of the light is weakened (the red light flashes three times after the ↓ key is adjusted to the highest gear corresponding to the fourth gear) FN+←=The speed of the light effect becomes slower (the red light flashes three times after the ←...
Page 12
FN+backspace=turn off backlight, turn on backlight, turn off all lights...
Need help?
Do you have a question about the K61 and is the answer not in the manual?
Questions and answers