Pre-Tensioner Seat Belt - Kia Stinger 2022 Owner's Manual

Safety features of your vehicle
CAUTIO
o not force to lock the left or right
seat belt into the center seat belt
buckle.
Make sure to lock the rear ceter
seat belt into the center seat belt
buckle.
If not, the improperly fastened seat
belt will not be able to provide pro -
tection.
To release the seat belt:
ODEEV058078NR
The seat belt is released by pressing
the release button (1) in the locking
buckle. When it is released, the belt
should automatically draw back into
the retractor.
If this does not happen, check the
belt to be sure it is not twisted, then
try again.
3 28

Pre-tensioner seat belt

O K050365N
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts (retractor pre-tensioner
and F ( mergency Fastening
evice)). The pre-tensioner seat
belts may be activated, when a
frontal collision is severe enough,
together with the air bags.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor
may lock into position. In certain
frontal collisions, the pre-tensioner
will activate and pull the seat belt
into tighter contact against the
occupant's body.
1. etractor Pretensioner
The purpose of the retractor pre -
tensioner is to make sure that the
shoulder belts fit in tightly against
the occupant's upper body in cer -
tain frontal collisions.
2. F ( mergency Fastening
evice) (for front seat belt)
Seat belts