Advertisement
Quick Links
Advertisement
Summary of Contents for SBody MD-K16B
- Page 1 EMS HOME SYSTEM User Manual...
- Page 2 1.2 Download and Install the APP 1.2.1 IOS system: If your have smart iPhone or IPAD, your can search “SBODY” on the App store, can directly download and install the APP.
- Page 3 Before switch on the device, confirmed the Bluetooth already switch on the phone or Ipad.（Setting--Bluetooth---Switch on) 2.1 Click on Sbody Application 2.2 User name and Password If your have newly installed the app on a device, to log in for the first time, Click on “Register”.
- Page 4 Your will now be asked to enter the following data: ----User name ----Password Confirm password At last, your have to confirm the term of use. After entering the data, click on“confirm”. 2.3 Register Success Your registration was successfully. Your can use these access details to load your saved data later.
- Page 5 To establish the Bluetooth connection,please click on”Scan”. Your will be given a list nearby Bluetooth devices. Please select TMPXXXX, so that a connection to the power box is established. Requirements for your to be establish a Bluetooth Connection: ---The power box must be charged and switched on.If this is the case,the blue led will be on.
- Page 6 3.Navigation and settings for the EMS Impulses Please note: the numbers 1-7 are used in the description below to refer to the buttons. 1 Menu 2 Set selected (Blue) muscle groups to Zero 3 Select all muscle groups 4 Moves the selected muscles (Marked in blue)up one level adjust from 0 to 100 5 Moves the selected muscle (Marked in blue)down one level 6 Start/Pause(Turn blue as soon as the Bluetooth connection is established) 7 Lag out, save settings.
- Page 7 4.Basic Settings You can set the pulse time,pause time and train time for each mode. The frequency and pulse width are fixed for all programmes,except VIP mode. You can access the basic setting by clicking on menu(1)on the start screen. Once your have made your settings,Press”Confirm”...
- Page 8 5. Starting Training Main Screen When starting your training, all muscle groups will be set to 0 and highlighted in blue. (In red color shown not selected ) You can now set the impulses for all muscle groups highlighted in blue simultaneously by pressing on “4”...
- Page 9 Step 3: The “Triceps” can be deselected again by clicking on the number “12”again (the“12” now displayed in Red) Step 4: If your want to control other muscle group individually,processed in the same way as “triceps”. Step 5: You can undo the deselection of the muscle groups by pressing “ALL”button.All muscle will now be displayed in blue again and can therefore be controlled.
- Page 10 We recommend that your only change the intensity when the impulses are switched on, as otherwise it is possible for an excessively high intensity to be set during the “pause”. 7. Sbody Power box ◎ LIGHT Easy to check machine working or not SWITCH ◎...
- Page 11 Make sure that your first hook the power box onto the panel on the suit with the two small lugs at the top and then lock it in place by pressing it gently downwards. The power box must strap onto the suits with a very close fit. 8.
- Page 12 Before the training Always pay attention to the correct size. In order for the electrodes of the dry suit To be better transfer energy through your skin to your nerves and muscles, an extremely thin firm of moisture is required. For some people, it is enough to simply wear the suit 2-3 minutes;...
Need help?
Do you have a question about the MD-K16B and is the answer not in the manual?
Questions and answers