Table of Contents
Advertisement
Pull out the condensate container
6.
fully.
Turn the condensate container 180°
7.
onto its underside and remove
the stopper that is fitted. Turn
the condensate container back and
insert the stopper into the recess on
the top side of the condensate
container.
Pull the filter out of the notch and
8.
place it into the recess on
the condensate container.
Installation and connection
Slide in the condensate container
9.
until it clicks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin.
If you want to change the
Note:
condensation drain back to
the condensate container, carry out
these steps in reverse order.
en
15
Advertisement
Table of Contents
