NT-147
Quick Start Guide
What's in the BOX
NT-147
●
IR Remote Control
●
Car Charger
●
Stylus-Pen
●
AC Adaptor
●
Car-Holder
●
External Antenna
●
Start Up your NT-147
Setting the battery switch to the ON position
Before starting to use your NT-147 for the first time, you
have to set the battery switch to the ON position. If the
switch is on the OFF position, alarm clock and time settings
will be initialized. Although data stored on the SD-Card are
still kept.
Insert SD-Card into your NT-147
Push the SD-Card carefully into the card slot. The labelled
side must point upwards. The memory card should slightly
lock in place. If you want to start the navigation software,
please ensure that the original SD-Card has been inserted
into the card slot.
NT-147
Support-CD
●
USB Client Cable
●
User Manual
●
Quick Start Guide
●
SD Card
●
Leather Case
●
Parts Name and Function
front
back
top
bottom
Volume Roller
Ear Phone Jack
Strap Link
right
Charging the Battery
There are two ways to charge your battery:
1.Connect the supplied AC adaptor to your NT-147 via
the DC in port.
2.Connect the USB
cable and the car
charger to your
NT-147 via the
Mini USB connector
as shown below.
(When the battery is fully charged,
the power LED will show green light.)
Power Indicator LED
Main Menu
Power
Return
Speaker
Direction Key/OK
Destination
Zoom In
MIC
Zoom Out
Battery Switch
Antenna
Reset
External Antenna Jack
Stylus-Pen
Mini USB
DC In
SD Card Slot
IrDA
left