Page 2
MAINTENANCE NOTICE ® DIGITAIR SBU Model 6695 End Unit Solid-State Motion Detector Modification Equipment Affected Reason for Modification This Maintenance Notice applies to SBUs US&S has learned that the manufacturer of the equipped with BOTH of the hardware items listed Pressure Transducer implemented a design below, or SBUs receiving either of these items change in 1998 that causes an increase in the...
Page 3
MAINTENANCE NOTICE Installation Procedure Scrape & Cut Scrape Trace Scrape Ground Trace Here Here Plane Here Prior to performing the installation procedure, observe the following: CAUTION contains static sensitive components. Prior to removing the SBU’s Rear Panel, or while working on the internal electronics, always follow...
Page 4
MAINTENANCE NOTICE Technical questions or information regarding the 8. When soldering the diode, ensure that its contents of this Maintenance Notice should be cathode (marked with a white line) is oriented as shown. directed to the R.A.I.L. Team via telephone at 1-800-652-7276 or via Internet e-mail at: 9.
Need help?
Do you have a question about the DIGITAIR 6695 and is the answer not in the manual?
Questions and answers