Matrix - how to check ® Table of contents INTRODUCTION MATRIX PRO GS Matrix PRO GS ....................................2 Software versions for Matrix PRO GS ............................2 AVAILABLE TEEJET APP’S Update Application software ................................3 Update GPS receiver firmware ..............................3 Force - calibration of touch screen ..............................3 Force - delete JOB data (Data-killer) .............................3 Matrix PRO GS from V4.11 ................................3 Matrix PRO GS from V4.20 ................................3...
Matrix how to check ® INTRODUCTION This guide is made to help identifying and solving problems with Matrix PRO GS consoles - in field. It is only some problems which can be solved by updating the application software, GPS firmware or replacing antenna/cable.
Matrix - how to check ® AVAILABLE TEEJET APP’S TeeJet has developed App’s which makes it possible, via the USB port, to update the application software, update GPS receiver firmware, force -delete job data in memory or force -touch screen calibration. The App’s and their support documents are placed on: ftp://ftp.support.teejet.dk/Tech_Support/OEM_Tech_Support/Matrix_GS/ Select one of the below folders and the actual version, e.g.
Matrix how to check ® WHAT IS THE PROBLEM? The error description and possible solution below are similar to cases where we had success, solving the problem by updating software - deleting data - improving GPS signal reception, in field. Error description Possible error Possible solution...
Matrix - how to check ® POWER SUPPLY Figure 1: Power supply • Check the 3-Amp fuse pos. A (PN 166-403) • Check there is +12V on pin ‘15/30’ in the 3P power connector, pos. B • Check there is Ground on pin ‘31’ in the 3P power connector, pos.
Matrix how to check ® Antenna Installation: The GPS Antenna base is magnetic. Position the antenna in the centre of the vehicle at the highest point with a clear view of the sky. A metal plate with adhesive strips has been included in the kit for easy mounting and installation.
Matrix - how to check ® • Fastend the antenna cable connector enough to ensure the 5V power supply to the antenna is established and constant. TEST GPS RECEIVER Place the Matrix PRO GS console in a vehicle and ensure the antenna is placed correct. Find a place with clear sky and optimal signal reception where you can drive the vehicle without risk to other road users.
Matrix how to check ® TEST CANBUS AND CAMERA To test the CANBUS and camera input requires some hardware. You may already have access to some of it, e.g. via a Section Control Module , Smart cable, camera etc. If you need help to identify hardware to establish a ‘Test tool’ , please contact TeeJet Technologies - Technical Support.
Matrix - how to check ® MATRIX PRO GS CONNECTIONS Figure 6: Connections. Figure 7: Screen examples. The two screen examples above indicate a problem with the display or the processor board, in this case it’s not possible to repair the console in-field. Notes / Useful part numbers: Glonass compatible patch antenna incl.
Need help?
Do you have a question about the TeeJet MATRIX PRO 840 GS and is the answer not in the manual?
Questions and answers