MBT LED SUPERFLY User Manual

LED SUPERFLY
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully before you initially start-up.
FEATURES
*LED flower effect in RGB and white Beams from the Fresnel lens
*DMX-512 control via regular DMX-controller (occupies 3 channels)
*Sound-controlled via built-in microphone
*Microphone-sensitivity adjustable via rotary-control
*Strobe effect
*11 internal programs
*Master/Slave function
*Particularly bright illuminating power of the 5mm RGB + white LEDs
*Advantages of LED-technology: extremely long life of the LEDs, low power consumption,
minimal heat emission, maintenance free with brilliant light radiation
OPERATION
After plugging into power source, the device starts running immediately.
STAND ALONE OPERATION
device
In Stand Alone Operation you can use the without a controller.
For sound controlled operation set all DIP Switches to OFF.
device
You can do without a controller as the features a built-in microphone,
which provides automatic sound control. You can adjust the sensitivity with the rotary-control on the rear panel,
SOUND-CONTROL OPERATION
For sound controlled operation set all DIP Switches to OFF.
MASTER/SLAVE OPERATION
The master/slave-operation enables that several devices can be synchronized and controlled by
one master-device. On the rear panel of the device you can find an XLR-jack and an XLR-plug,
which can be used for connecting several devices. Choose the device which is to control the
effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a stereo shielded cable.
Connect the OUT-jack with the IN-plug of the next device.
Set all DIP Switches to OFF in order to determine the Master device. Set DIP Switches 1 and 10
to ON in order to determine the Slave device.