Nady Systems RSM-3 User Manual

Congratulations on purchasing the Nady RSM-3 Ribbon Studio Microphone. This superior neoclassic
microphone is designed for use in contemporary, state-of-the-art studios, yet offers the unique natural
sound previously only available on such classic large ribbon mics as the legendary RCA 44, which is still
used to make great recordings today after almost 70 years. Perfect for recording studio vocals, acoustic
instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many live sound
applications. Powerful and versatile, and with the unmatched natural sound of classis ribbon mics, the
RSM-3 meets the stringent requirements of even the most demanding digital recording and live
broadcasting applications.
This user guide covers the operation of the RSM-3 microphone and the available optional accessories.
To take full advantage of the superb features of your microphone, and to enjoy long and trouble-free use,
please read this user's guide carefully. As ribbon microphones are, by their design, very sensitive to
damage from mishandling and use, it is very important to read and observe the precautions below about
proper use.
UNPACKING, INSPECTION, STORAGE AND TRANSPORT
Your RSM-3 microphone was carefully packed at the factory, and the shipping carton (and carrying case) was designed to protect the
unit during shipping. Please retain this container for subsequent transport and in the highly unlikely event that you ever need to return
your microphone for servicing. Please note: since the ribbon assembly of the RSM-3, as with all ribbon microphones, is extremely
fragile, you must verify immediately upon receipt of your microphone that it has not been damaged during shipment and is operating
correctly. The warranty on this microphone does not extend beyond an initial inspection, since these microphones can be so easy
damaged during handling and use. If the unit arrived damaged please return it immediately to where you bought it. Units that are
damaged in use can be returned to Nady Systems and the ribbon assembly replaced for a fixed charge (see Service section).
STANDARD ITEMS SUPPLIED
• RSM-3 ribbon microphone
• Padded nylon carrying case
• Padded wooden storage box
• Shockmount

• User Guide

• Warranty card
FEATURES
• Versatile physical and acoustic design for numerous recording
applications, including brass instruments, strings, piano,
percussion, vocals and orchestra ambiance
• Low-tension 35 mm long, 2 micron thick aluminum ribbon design
for flat and well balanced audio reproduction with a deep, full
low end; well defined, realistic mids; and sweet natural, musical
sounding highs
• Fast accurate detailed transients, ultra-high >148dB SPL
capability, overall stunning "you-are-there" realism
• Offers a choice of pickup audio depending on placement for
utmost versatility in dialing in the desired "sound". Figure-8
audio directional (pickup) pattern for both front and rear side,
with extended sweet spots (as compared to large diaphragm
condenser mics), and slightly different frequency responses
RSM-3 Ribbon Studio Microphone
USER GUIDE

OPTIONAL ACCESSORIES

• MPF-6 Pop Filter (highly recommended, as ribbon
microphones are very susceptible to damage from strong
air blasts, as with percussive sounds during recording)
from front and rear side. Also, increased off-axis high frequency
response on sides, with decreased high response above and
below on-axis (though lower audio levels).
• Enables often useful individual recording volume control of
separate sources, through use of stereo mic setups wherein
isolation is achieved by placing the source so that it is in the
principal axis of one mic and the off-axis null of the other
• Manufactured with the finest materials incorporating a machined
housing with advanced internal shock mount construction for the
highest structural integrity and rugged reliability
• Supplied with a shockmount, padded nylon carrying bag, and
padded wooden storage box