Advertisement
Before using this product, please read the instructions carefully.
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging. You can also use your laptop/notebook for charging.
Figure A
Download "RS Motive" from "Apple Store" or "Google Play Store" or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
Note: Tap and hold touch button on time interface to check your MAC address. (Figure E)
The connection icon on the home screen indicates successful connection of the smartwatch with your smartphone. (Figure F)
Main interface
On the main interface of your smartwatch you can check the time, date, daily steps, heart rate, the smartwatch's battery.
Note: The main screen interface is customizable (elements, wallpapers, fonts, colors...), you can choose from the predefined interface or choose your own style from the "RS Motive" app. (Figure G)
Figure G
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address: No. 1108 Tower B, Tian'an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website:www.riversongtech.com
You can check step count/calories burned on Activity page
.
Note:
Figure H
You can check sleep data on this interface.
Note: Sleep data will be reset to 0:00 on your watch interface at 8:00 PM everyday, you can check previous day data from your app interface.
History data will get cleared in case of app reset or removal of app from your smartphone. Otherwise, it will remain saved on your "RS Motive" app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while sleeping.
Figure I
Tap and hold touch button for 3 seconds to measure your heart rate, you can also check your heart rate via the "RS Motive" app.
Note:
Choose your sport mode and start training. You can also check your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Figure J
Your running data will be recorded on the "RS Motive" app after entering "Running" interface.
Note: Your heart rate will be continuously tracked only once "Running" interface is activated.
Figure K
Tap and hold touch button for 3 seconds to measure your Blood Pressure, you can also check your Blood Pressure via the "RS Motive" app. (Figure L)
Note:
Figure L
Tap and hold touch button for 3 seconds to measure your SPO2 (Oxygen monitoring), you can also check your oxygen level via app. (Figure M)
Note:
Figure M
In order to display the Weather on your smartwatch, you need to install first the "RS Motive" app, and set up the location you desired to get the weather from. Please make sure to bind your "RS Motive" app with your smartwatch.
Tap and hold touch button for 3 seconds to check your messages.
Note:
Figure N
Tap and hold touch button for 3 seconds on the "Camera" page to remotely access your mobile phone camera.
Note: It is recommended to keep your mobile phone unlocked while using the function.
Tap and hold touch button for 3 seconds on the "Music" page to control the music player of your mobile phone remotely.
Note:
When you are on the Other interface on your smartwatch, Press and hold touch button for 3 seconds to enter other interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
Why the device can't be detected while pairing with phone Bluetooth?
Why Bluetooth can't be connected occasionally?
Bluetooth function of some cell phones become abnormal occasionally upon activation. Bluetooth can be start working properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch's data can't be synchronized to the "RS Motive" app or there is no incoming calls and messages reminder from the smartwatch after resetting or upgrading the device firmware?
Why there is no incoming call / message reminder for android system?
Shall the Bluetooth be connected all the time? Will data in the device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be saved in the smartwatch. When the smartwatch is connected to the "RS Motive" app, the data will be uploaded to the app history automatically.
Note: The Bluetooth connection is mandatory for receiving incoming calls and messages alert.
Please clean the smartwatch with clean wet wiper regularly. The smartwatch is waterresistant for daily use. Please avoid wearing it for swimming, showering, having a sauna or steam. Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature. The operating temperature is from 14°F to 122°F (10°C to 50°C).
We, at Riversong, take our social responsibility seriously and are committed to the cause of saving our environment. It is in keeping with these commitments that we are proud to state that Riversong smartwatch has got RoHS and CE certification.
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Motive C that isn't answered in the manual? Leave your question here.