Table of Contents
Advertisement
TV's CEC function is set to on.
3. Connect audio receiver (such as amplifier) to the S/PDIF OUT and L/R AUDIO OUT port of
this device.
4. Connect the power adapter provided. Power on all devices.
5. Use the DIP switch to control audio output. More detail information, please refer to "DIP
Switch Control" section
6.
DIP SWITCH CONTROL
The four-pin DIP switch can be used to set auto audio source selection, audio mute, and audio
delay controls.
Please refer to the following table to get the detail settings about the DIP Switch.
Function
Auto (Audio path selection)
Audio Return (eARC/ARC)
HDMI De-embed (HDMI OUT Pass-thru) Up
HDMI De-embed (HDMI OUT Muted)
Audio delay 1 - Auto
Audio delay 2 - 80ms
Audio delay 3 - 100ms
Audio delay 4 - 120ms
Note:
• By default, audio source selection is set to Auto (Audio path selection) (Up, Up) and audio
DSP delay is set to Audio delay 1-Auto (Up, Up).
Blu-ray Player
HDMI IN
HDMI OUT
Display
Up
Down
1
Up
Down
Down
-
-
-
-
8
Stereo Amplifier
L/R AUDIO OUT
4-Pin DIP Control
2
3
Up
-
Up
-
Down
-
Down
-
-
Up
-
Down
-
Up
-
Down
4
-
-
-
-
Up
Up
Down
Down
Advertisement
Table of Contents
