HellermannTyton t201 Operator's Manual

AC CURRENT TRANSDUCER
A
OPERATOR'S MANUAL

1. SAFETY INFORMATION

The AC current transducer
design-ed according to IEC -1010 concerning
safety requirements for hand - held current
clamps for electrical measurement and test.
Follow all introduction
require-ments to insure that the current
clamp is used safely and is kept in good
operating condition.

1.1 SYMBOLS

Important safety information,
refer to the operating manual.
Double insulation ( Protection
classⅡ)
1

2. DESCRIPTION

Refer to the Figure 1. and to the following
has been
and operating
numbered steps to familiarize yourself with
the AC current transducer.
①
Transformer Jaws
Designed to pick up the a.c. current
following though the conductor.
②
Hand Guard
Designed to protect user for safety.
③
Trigger
Press the lever to open the transformer
jaws.

3. SPECIFICATIONS

Accuracy is specified for a period of one year
after calibration and at 18℃ to 28℃(64F to
82F) with relative humidity to 80.
Accuracy specifications are given as:
 of reading  digits
2
3
2
1
Fig 1.
3