Download Print this page

DARTMOOR E-THUNDERBIRD CF 2022 Assemble Instruction

Download this manual

TABLE OF CONTENTS

Page 1 TABLE OF CONTENTS...
Page 2 TABLE OF CONTENTS 1. Dropper seat post assembly. 2. Electric cables support. 3. Assemble of EW-EN100 connector on the dropper seat post cable. NOTE: Due to the packaging and transport, the control connector is placed in a separate box. Other system components have been installed in accordance with the manual and manufacturer’s recommendations.
Page 3 TABLE OF CONTENTS 1. DROPPER SEAT POST ASSEMBLY 2. ELECTRIC CABLES SUPPORT Always use a SHIMANO genuine tool when removing and inserting electric cables. The first step after unpacking the bike is the front wheel assembly. After completing the first step, install the dropper seat post with the CAUTION: When connecting and disconnecting the electric cable, do not force the plug to bend it.
Page 4 TABLE OF CONTENTS 3. ASSEMBLE OF THE EW-EN100 CONNECTOR ON THE DROPPER SEAT POST CABLE The EW-EN100 is a connector with simple operation / display functionality. CAUTION: Installation of the EW-EN100 Install the EW-EN100 as shown in the figure below to aviod touching the sides of the frame. Otherwise, it may be damaged in case of tipping over the bicycle and being squeezed between the frame and the ground.
Page 5 TABLE OF CONTENTS...