Page 1
TABLE LAMPS erebus series WAMPAT LIGHTING pursue the essence of life, from the light source to the product, and to the environment where the product is located. We express the essence and unity of life, and let the light source integrate into life.
Page 3
L I G H T I N G ENGLISH PAGE 1 - 07 Français PAGE 08 - 13 EREBUS SERIES DIRECTORY W61E1161N...
"OFF" position. CAUTION Electrician installation highly recommended. All glass is fragile Use care when handling glass component(s) and or lamp(s). Read instructions carefully and turn electricity off at the circuit breaker panel before beginning installation. EREBUS SERIES TABLE LAMPS ENGLISH...
WHAT’S IN THE BOX INSTALL STEP 1 Assemble lampshade : Take out the shade metal frames (D) , (E ) and fabric piece (F) and lamp body (A),(B),(C) from box. Fit the fabric piece (F) on the metal frames (D) ,(E) with their own hook and loop fasteners as diagram to get a completed lampshade.
Page 6
INSTALL INSTALL STEP 3 STEP 2 Connect the plug into an outlet and 1. Pull the remaining cable (C)out of base. twist the rotary switch on the socket to 2. Fix the socket (B) on the base (A) by turning it in clockwise direction until it turn on the light.
Page 7
L I G H T I N G L I G H T I N G Thank you for choosing our products please read the instructions carefully before installation,and please keep the instructions properly TIPS AND TRICKS 1.Do not attempt to move this furniture without first removing all equipment 2.Death or serious injury may occur when children climb on audio and/or video equipment furniture.
Instructions d’ Assemblage et d’ Installation QU'EST-CE QU’ IL Y A DANS LA BOITE ATTENTION Veuillez lire attentivement les instructions et coupez le courant au disjoncteur central avant de commencer l'installation du produit. - - -- -- - - -- -- --- -- - --- - -- - - -- - - ---- --- ---- ---- ---- --- -- AVERTISSEMENT : S’...
Page 9
INSTALLER INSTALLER Étape 2 Étape 1 1. Tirez le fil (C) de la base. Assemblage de l'abat-jour : 2. Fixez la douille (B) sur la base (A) en la tournant dans le sens des aiguilles Retirez les cadres métalliques de l'abat-jour (D), d'une montre jusqu'à...
Page 10
INSTALLER Étape 3 L I G H T I N G Branchez la fiche dans une prise et tournez le commutateur sur la douille Merci d'avoir choisi nos produits, veuillez lire attentivement les instructions avant de pour allumer la lumière. commencer de l’installation du produit, et veuillez garder les instructions correctement Sécurité...