It has a smooth gliding anodised soleplate with many tiny holes to help steam penetrate fabric. Here at Lakeland, our award-winning family-owned business still offers the same excellent quality, value for money and exceptional customer service as when we founded the company back in the 1960s.
In the event of damage, or if the appliance develops a fault contact the Lakeland customer care team on 015394 88100. • Do not use this appliance if the lead is damaged. Contact the Lakeland customer care team on 015394 88100.
Page 5
• To avoid injury or possible fire, do not cover the appliance when in use. • Do not connect this appliance to an external timer or remote control system. • An earthed extension cable may be used with care. The electrical rating of the cable should be at least as great as the appliance.
USING YOUR DIGITAL STEAM IRON FOR THE FIRST TIME • Unpack the iron, remove all the packaging materials. • Unwind the power cord. • Fill the iron with tap water, as described below in ‘Filling the Water Tank’. • Stand the iron upright on its anti-slip heel. Make sure the steam slider is turned to ‘No Steam’...
Page 7
FILLING THE WATER TANK • For best results, always make sure there is plenty of water in the tank when ironing, but do not fill the tank beyond the ‘MAX’ level. • Only use water in the water tank. DO NOT add perfume, vinegar, chemically descaled water or any other substances into the water tank.
INSTRUCTIONS FOR USE Starting ironing garments requiring a low temperature first. Reducing the waiting time, the iron takes less time to heat up than to cool down. It will eliminate the risk of scorching the fabric. Fabrics with this symbol are ironable for Synthetics. Fabrics with this symbol are ironable for Silk and Wool.
Page 9
STEAM SHOT BUTTON • Use this button for an extra burst of steam at the front of the soleplate to help smooth out stubborn Steam creases and wrinkles. shot button • Great for denim and linen, it can be used when you are ironing with or without steam.
AUTO SHUT-OFF • The iron will automatically switch off when the iron is not moved and still switched on at the plug. This is a safety feature. • The iron will switch off automatically if left in a downwards position or left on its side and not moved for 30 seconds.
Check the iron is plugged in and switched on at the socket. There could be a problem with the socket, if so, try a different socket. If the iron is still not working contact Lakeland Customer Services. Question: Why is no steam coming out of the iron? Answer: There may not be enough water in the water tank, see ‘Filling the...
CARE AND CLEANING • Switch off and unplug the iron, and let it cool completely before cleaning. • Clean thoroughly before using for the first time and after every use. • Check the parts for wear or damage after every few uses. •...
Page 13
• Press and hold down the ‘Self Clean’ button. • Shake the iron backwards and forwards and rock from side to side. Steam and hot water will sprinkle through the holes in the soleplate. • When all the water has drained through, release the ‘Self Clean’...
TECHNICAL INFORMATION • Power: 2000-2400W. • Voltage: 220-240V. • Frequency: ~50/60Hz. • Flex length approx. 190cm. (74¾″). • Product weight approx. 1.53kg. ELECTRICAL CONNECTIONS THIS APPLIANCE MUST BE EARTHED The appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes fitted with sockets to current specifications.
Page 16
Lakeland Alexandra Buildings, Windermere, Cumbria, UK LA23 1BQ Tel: +44(0)15394 88100 lakeland.co.uk...
Need help?
Do you have a question about the 53395 and is the answer not in the manual?
Questions and answers