Advertisement
NOTE: Read the entire instruction manual before installing and assembling.
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper
installation of this product may cause damage or serious injury.
• Any person installing this product must have at least a minimum level of building and constructing knowledge.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached
hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces
their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal
injury.
The installer must be fully aware of the position of any electrical wiring, plumbing or other typical building construction
materials that may be hidden in the wall where this bracket is intended to be installed. Drilling into or contact with an
unknown space can result in being electrocuted and possible death or damage to the building structure or amenities.
Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any
parts are missing or faulty, telephone your local distributor for a replacement.
wall plate(x1)
A
Package M
M4x12 BM(x4)
M-A
Package W
ST6.3x55(x4)
W-A
WARNING
adaptor bracket(x2)
B
M5x12 BM(x4)
M-B
concrete anchor(x4)
W-B
M6x12 BM(x4)
M-C
bubble level(x1)
C
D5 washer(x4)
Ø5.2xØ10x1mm
M-D
D6 washer(x8)
Ø6.5xØ16x1.6mm
W-C
Advertisement
