Advertisement
•
NEVER RUN EMPTY THIS MAY BURN THE MOTOR OR DAMAGE THE BEARINGS.
•
Turn the Speed selector to "1" or "2" position and within repeat the operation
until desired results are reached.
•
The pulse level gives you fingertip control over short food processing jobs, when
turn the Speed selector to "P", the machine will run at high speed .
•
Turn to "0" to stop the machine.
Using the Mill
•
Set the capsule and put coffee beans, seed, herbs or spices that you want to mill
into the capsule and cover it. Don't fill the mill more than 80% full.
•
Set the Speed Knob to the desired speed position, turning it clockwise.
•
Turn the capsule clockwise and remove it from the base.
•
Remove the Cover. Pour out the coffee or other powder that you milled.
Notes:
•
The appliance should only be run for 60 seconds when using the blender and 30
seconds when using the grinder mill. This should be more than adequate for any
use.
•
Before it's used again, allow the motor to cool for at least 2 minutes
•
Turn the Speed Selector to "0" position once the blending/milling is completed
and unplug the cord from the wall outlet.
•
This appliance can also mix around 500g of ice with care.
Cleaning
NEVER IMMERSE THE BASE IN WATER OR ANY OTHER LIQUID. ALWAYS SWITCH OFF AND
UNPLUG THE APPLIANCE BEFORE CLEANING
•
The blender jar, lid and mill attachments can be washed in warm soapy water, rinsed
and dried thoroughly. We don't recommend washing in the dishwasher because the high
temperatures can dull the clear plastic parts.
•
The base can be cleaned with a soft cloth moistened with a mild detergent solution.
•
Do not use strong chemical or abrasive cleaning agents
We Swan Products Ltd declare that this product conforms to the following product legislation in
accordance with the following directive(s):
•
2004/108/EEC The EMC Directive (the Electromagnetic Compatibility Directive).
•
2006/95/EC. The LVD Directive (Low Voltage Directive).
•
2011/65/EU. The RoHS directive (Restriction of Hazardous Substances Directive)
•
EC 1935/2004 Food Contact
•
2009/125/EC Eco Design Directive
SP26050N_IM.indd 5
HOW TO USE
DOCUMENTATION
5
30/06/2015 09:07
Advertisement
