Page 3
1. Air is sucked in through small vents in the base by an electric motor. Search ‘MOMAX Smart’ app on iOS or Android or any platform. 2. The air is propelled through the H13 HEPA and the UV-C chamber, then to the slit in the frame.
Page 4
(you will hear “beep” for 3 times). When “F” appears and blinks, tap “Confirm indicator rapidly blink” on The Home page of all connected devices. MOMAX Smart app to continue. To set scenarios or conditions and respective actions of the new smart device.
Page 5
Tips: Tap “+” or “add device” at the upper right corner and choose the fan on • Stable Wi-Fi network is required MOMAX Smart app. • Link to the Wi-Fi network again when the device is disconnected The app will automatically match the device. After the match is found, you can edit the name of the device.
Page 6
3 shortcut modes You can control the ON/OFF, fan speed, UV-C, Auto-off timer function 3 shortcut modes are applicable to MOMAX Smart app only. and 3 shortcut modes using the app. Moreover, this device can execute automatically according to conditions such as specific time, weather, etc.
Page 7
Smart Home Ecology System Voice Control Adding Multiple Devices in interactive smart mode. This smart device supports voice control with Amazon Alexa, Google Assistant and other China platform, etc.) To connect with these platforms, please refer to the App>More Services>Voice Service. Voice commands of each platform may vary, please refer to the relevant user manual.
Product Overview Air Outlet Air Inlet Top Cover Of Air Purifying Filter Air Inlet Power Input Port Safety Lock Touch Screen 90°...
Page 9
Operating Instructions Of Remote Control Touch screen 1. Battery 1st use: Simply remove the clear contact-prevention strip coming out of the closed battery compartment. Wi-Fi Battery replacement: As shown in the picture. Please note the battery direction. Level of Speed - Please do not install the positive and negative poles of the battery in wrong position.
Maintenance Operating Instructions Of Touch Screen Ensure the machine is unplugged before maintenance. 1. Power ON/OFF Tap for 1 sec to Power on. Surface Tap & hold for 2 secs to Power off. Use a lightly moistened soft cloth with neutral cleanser to clean the remote control and the surface of the unit.
Filter Replacement About H13 HEPA Filters and UV-C This device has a memory function. After a total of 720 hours of operation, H13 HEPA filter UV-C lines will appear progressively on the display (as shown in the figure) and you will hear “beep” sound for 5 times. After filter maintenance or replacement, press &...
Effective Range Specification Sterilization + Filtration : Model No. : AP6S coverage up to 200 sq. ft Operating Voltage / Frequency : 100-240V ~50/60Hz Air Circulation : Power : 35W Delivery up to 4m (max.) Rated Voltage : 24V Make sure to leave a certain amount Filter Type : H13 HEPA of space around the machine.
Page 13
Warnings Points for attention 13. When an abnormality occurs (such as a burning smell, overheat, etc.), turn off the machine and unplug the power cord. Before using, please read this user manual carefully and keep it for future reference. 14. Do not cover the air inlet with clothing, cloth strips, curtains, etc. Do not block the inlet and air outlet, for example, do not place objects on or in front of the air outlet.
1. Do not place the product as household waste; 8. Please visit www.momax.net for the latest product information. 2. Please dispose of discarded electronic products properly according to local regulations; 3. MOMAX encourages you to participate in the electronic recycling program.
Need help?
Do you have a question about the UItra-Air AP6S and is the answer not in the manual?
Questions and answers