Advertisement
Quick Links
Accu-Tab® Series 100
by Axiall Corporation
Installation and Operating Instructions
DANGER:
DO NOT MIX CHEMICALS!
The Accu-Tab® Series 100 Chlorination System
is designed for use with Axiall LLC approved
tablets only. Do not use Cal-Hypo tablets with
stabilized chlorine or bromine products, or other
sanitizing chemicals.
Fire or explosion could result.
The Accu-Tab® Series 100 chlorination
system is NSF/ANSI-Listed for pool
and Spa applications. ONLY Axiall
LLC Accu-Tab® Blue SI Chlorinating
Tablets for commercial pool and Spa
applications are permitted for NSF
installations. Use of other tablets will
NSF-50
void NSF certification.
.
Chlorination System
1
Revised 02-05-2021
Advertisement
Summary of Contents for Axiall Accu-Tab 100 Series
- Page 1 Installation and Operating Instructions DANGER: DO NOT MIX CHEMICALS! The Accu-Tab® Series 100 Chlorination System is designed for use with Axiall LLC approved tablets only. Do not use Cal-Hypo tablets with stabilized chlorine or bromine products, or other sanitizing chemicals.
- Page 2 This results in a constant and predictable rate of chlorine delivery. The chlorination system is designed for use ONLY with Axiall LLC Accu-Tab® Blue SI Chlorinating Tablets to utilize the Axiall LLC erosion feeder technology that erodes only the bottom layer of tablets on the sieve plate, while keeping tablets above the sieve plate dry and ready for use.
- Page 3 Installation – Accu-Tab® Series 100 Chlorination System Figure 1 – Gravity Return 1. Place the chlorination system in a location near the place of application. 2. Level the system. This is important for proper delivery. 3. Install a Supply Service Valve off of the return line. 4.
- Page 4 Installation – Accu-Tab® Series 100 Chlorination System Figure 2 – Suction Return NOTE: Pool re-circulation pump MUST be above the pool water level. This installation MAY NOT be used with a Chemical Controller. 1. Place the chlorination system in a location near the place of application. Chlorinator MUST be above the pump. 2.
- Page 5 Installation – Accu-Tab® Series 100 Chlorination System Figure 3 – Forced Venturi Return (Kit available from Axiall SKU 9500154) 1. Place the chlorination system in a location near the place of application. 2. Level the system. This is important for proper delivery.
-
Page 6: Operation
Operation Cleaning To refill the chlorinator The chlorinator should be cleaned twice per year to 1. Remove the lid. (Be careful not to inhale fumes.) remove any residual product that may accumulate inside 2. Fill the chlorinator with Accu-Tab® Blue SI the unit. - Page 7 Delivery Rate Accu-Tab ®Series 100 using Accu-Tab® Blue SI Tablets Delivery NSF ® Pool Delivery Flow Through Chlorinator, gpm Accu-Tab® Series 100 Chlorinating System Flow Control Gate Valve Float Flow Valve Meter ¾” FPT Outlet ¾” FPT Inlet System Schematic - Accu-Tab® Series 100 Chlorination System when using Gravity Return...
-
Page 8: Parts List
Accu-Tab® Series 100 Chlorinating System Flow Control Gate Valve Float Valve Flow Meter ¾” FPT Outlet ¾” FPT Inlet System Schematic - Accu-Tab® Series 100 Chlorination System when using Suction and Forced Venturi Return Parts List Body and Lid w/Sieve Plate Support Ring Flow Meter Filter ½”... - Page 9 System or defective part treatment system equipment (the "System") and that the to such location as may be specified by Axiall; and, (iii) only Axiall’s Accu-Tab® Blue SI calcium hypochlorite System will be free of defects in materials and workmanship for a period of eighteen (18) months from tablets are used in the System.
Need help?
Do you have a question about the Accu-Tab 100 Series and is the answer not in the manual?
Questions and answers