Table of Contents
Advertisement
The quantize value is set by pressing the QUANTIZE
button in the pattern mode (the QUANTIZE function
cannot be called while a pattern is playing or during
either of the write functions). The LCD panel will read
"QUANTIZE = X/XX" where "X/XX" is the currently
selected quantize value. The quantize value can then be
changed by pressing the white number button with the
fraction marking corresponding to the desired quantize
value: 1/4, 1/6, 1/8, 1/12, 1/16, 1/24, 1/32, 1/48, or
1/192. If 1/192 is selected, the display will read
"QUANTIZE = OFF" since this is the finest quantize
value. Exit the quantize mode by pressing the QUANTIZE
button.
Quantize (EX: QUANTIZE 1/16– l/8– l/32)
Click Time
This function sets the rhythm guide to "click" on every
1/4, 1/6, 1/8, 1/12, 1/16, 1/24 or 1/32 note during the
real time write function. To change the click timing
activate the click function by pressing the CLICK button
in the pattern mode (the CLICK function cannot be called
while a pattern is playing or during either of the write
functions). The LCD panel will respond with "CLICK = 1 /
8" indicating that the rhythm guide is set to click on
every eighth note (the default value). Change the click
value simply by pressing the appropriate white number
button, marked 1/4, 1/6, 1/8, 1/12, 1/16, 1/24 or 1/32.
Inputs of 1/48 or 1/192 will be ignored. Exit the click
function simply by pressing the CLICK button again.
CIick Time (EX: CLICK 1/8 – 1/16)
(1/4, 1/6, 1/8, 1/12, 1/16, or 1/32 click times are acceptable)
Pattern Clear
Single patterns can be cleared by selecting the pattern
to be cleared and then pressing the CLEAR button. To
confirm your intention to clear the pattern the Rx15 LCD
panel will respond with "CLEAR PTN XX"?–where
"XX" is the number of the selected pattern. Press the
+ 1/YES button to clear the pattern, or the -1/NO
button to cancel the clear function.
Pattern Clear (Single)
Select pattern number to be cleared.
All patterns in memory—00 through 99—can be cleared
simultaneously if necessary. This is a "hidden function"
in the sense that it cannot be accessed directly-in
order to prevent accidental erasure of the entire memory
contents.
First, press the CLEAR button from the pattern mode.
When the "CLEAR PTN XX ?" display appears,
simultaneously press the ACCENT button and
STOP/CONTINUE button. The LCD panel will respond
with "CLEAR ALL PTNS?" to confirm your intention to
clear all patterns. Press + 1/YES to clear the pattern
memory, or press the - 1/NO button to cancel the clear
function.
The "clear all patterns" function initializes the pattern
memory, and can be used to restore normal operation
should an operation error cause the RX15 software to
14
Advertisement
Table of Contents
