Page 1
Operating Instructions Replacement lamp unit ET-LAD510C (1 pc) Model No. ET-LAD510FC (4 pcs) Declaration of Chemical Substances Hazardous or Toxic Substances or Elements Part Name Cr(VI) PBDE Projection lamps Mechanical parts : Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.
Page 2
Read this first! Always follow these precautions WARNING: ■ Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall outlet. z Electric shocks or explosions can result if this is not done. ■...
Page 3
(ii) Hold the lamp unit cover securely and slide Switching off the projector it in the direction of the arrow, and then pull it out backward to remove. When the projector is operating, perform the following steps to turn off the projector, and wait until the lamp unit cools off then make the replacement.
Page 4
4) Remove the lamp unit. Grooves of the guide to attach the lamp case Use a Phillips screwdriver to turn the lamp unit until they turn freely, and then remove the lamp unit from the lamp case. Hold the handles of the lamp unit and remove Guides to attach the lamp case ...