Advertisement
Quick Links
Quick-start for Auto Dialler
Section 1: Install the sensing components
After installing a new monitor the TEST sequence overleaf MUST be performed
UQ1146
Alert-it Care Alarms, Atherstone House, Merry Lees Industrial Estate, LE9 9FE
0845 2179951, www.alert-it.co.uk, sales@alert-it.co.uk
Connect dialler
to mains adapter
Reconnect phone here (after removing any BT
adapter from cable) or use supplied double
adapter
Remove existing phone and
reconnect Auto dialler in
it's place.
Green light C flashes when a radio signal is
received, which provides a test feature for
proving range.
Green light is steady when an alarm has
been received
Press to register a new monitor
Hold down while activating the new monitor (eg by
pressing RESET). The unit will detect a valid Alert-it
transmission and add the unit to its memory. The GREEN
light will flash and a short audible tone is heard.
Page 1 of 4
Made in the UK
Advertisement
Summary of Contents for Alert-it P117C
- Page 1 After installing a new monitor the TEST sequence overleaf MUST be performed Page 1 of 4 UQ1146 Alert-it Care Alarms, Atherstone House, Merry Lees Industrial Estate, LE9 9FE 0845 2179951, www.alert-it.co.uk, sales@alert-it.co.uk Made in the UK...
- Page 2 Green light is steady when an alarm has been received Page 2 of 4 UQ1146 Alert-it Care Alarms, Atherstone House, Merry Lees Industrial Estate, LE9 9FE 0845 2179951, www.alert-it.co.uk, sales@alert-it.co.uk Made in the UK...
- Page 3 Short melody Find cause of radio failure (could Fail bursts be range, monitor turned off, interference) Page 3 of 4 UQ1146 Alert-it Care Alarms, Atherstone House, Merry Lees Industrial Estate, LE9 9FE 0845 2179951, www.alert-it.co.uk, sales@alert-it.co.uk Made in the UK...
- Page 4 Alternatively an alarm can be stimulated and the audible response heard. The alarm can then be cancelled The Alert-it system has been designed with due regard to reliability and integrity. While it offers a highly vigilant monitoring method,it is always possible that a distress condition can go undetected for a variety of reasons (including malfunction) and in life threatening situations it is advisable to use the Alert-it system in conjunction with additional monitoring techniques (e.g.
Need help?
Do you have a question about the P117C and is the answer not in the manual?
Questions and answers