Cleaning And Storage; Any Questions - Y-BRUSH NylonBlack User Manual

Table of Contents

Advertisement

Available languages

Available languages

6.INSTRUCTIONS FOR USE
3 steps to a fast and effective brushing
6.1
APPLY YOUR TOOTHPASTE
Y-BRUSH APPLICATOR:
With the
place it on the toothpaste. Spread a
dab of toothpaste along the entire length of the brush.
On the contrary,
if you don't have any, put a dab of toothpaste on
your tongue and spread it over all your teeth.
After applying the toothpaste, remember to
6.2
THREE, TWO, ONE... BRUSH!
In our user guide, we talk about OSCILLATIONS. An oscillation is a
BACK AND FORTH MOVEMENT
with your toothbrush. This movement is
to be done while brushing, oscillating from left to right, then from right
to left, repeatedly.
2 RULES
TO REMEMBER FOR A BRUSHING CYCLE
5
OSCILLATIONS
1
SELECT YOUR MODE
(ONLY FOR THE
2
PLACE THE BRUSH ON ONE OF YOUR JAWS
3
PRESS THE START BUTTON TO START THE VIBRATIONS*
4
BITE AND OSCILLATE THE BRUSH
5
DO THE SAME FOR THE OPPOSITE JAW
*REFER TO CHAPTER 4 OR 5 CORRESPONDING TO YOUR PRODUCT
WET
the brush head.
TOOTHPASTE
TABLET
Crunch the tablet and
spread the pieces over
your teeth.
10
&
BITES
PER OSCILLATION
NYLONBLACK
VERSION)
BITES x5
1
2
3
1
BACK
Explanatory scheme of
and forth movement from left to right and then from right to left,
accompanied by 10 bites.
6.3
When you have finished brushing your teeth, pinch the base of the
brush to unlock it, then
the brush to remove the toothpaste. Let it dry on its
or upside down on the edge of a glass.
Support

ANY QUESTIONS?

Write us at:
customers@y-brush.com
Our customer service is committed to respond within 24 hours to
give you the best experience possible.
18
MOVEMENT SEEN
FROM ABOVE
BITES x5
5
5
4
4
3
1
FORTH
1
OSCILLATION
(BACK & FORTH)
AN
OSCILLATION, that's to say a back

CLEANING AND STORAGE

RINSE
it with clean water. Run a finger through
STAND
PINCH HERE
1
2
(optional),
PINCH HERE
19

Advertisement

Table of Contents
loading

Table of Contents