Troubleshooting - Latte SoundMagic boom User Manual

10. Troubleshooting

Issue
Bluetooth pairing
cannot be established
Power is on, but the
blue light is off.
Cannot pair.
The sound from the
speaker is too low or
has no sound.
The Bluetooth
connection range is
too short
Music plays normally,
but with interrupted
sound
Bluetooth cannot
connect to other
Bluetooth devices
Note: If the problem still cannot be solved, please contact technical support or our customer
service.
1. Low battery. Please charge the product fully before you start
using the speaker again
2. Please check if other phone or Bluetooth device is already
paired and connected to the speaker. The speaker can only be
connected to one Bluetooth device at a time. In this case, please
disconnected the currently connected device and pair the device
you are trying to connect again.
3. Move the speaker closer to your phone or Bluetooth device
4. Please check if your phone is connected to "SoundMagic
boom" in your phone's Bluetooth setting.
The speaker has entered the sleeping mode due to prolonged
non-operation. Press and hold the pairing key on speaker to
wake it up.
1. When your phone is connected to the speaker, the Bluetooth
volume of your phone is not turned up enough or muted. Please
turn up the Bluetooth volume of your phone.
2. The output volume of your phone is too low. Please try to test it
with different Bluetooth device to check if the issue is with the
speaker or the Bluetooth device
Please check if there are any obstacles between your Bluetooth
device and the speaker.
1. Please check if there are any obstacles between your
Bluetooth device and the speaker.
2. Check if the distance between your Bluetooth device and the
speaker exceeds the connection range (33ft). Please shorten
the distance between your Bluetooth device and the speaker.
3. Low battery. Please charge the product fully before you start
using the speaker again
4. Please lower the volume a little bit.
If the speaker is currently paired with one Bluetooth device, you
cannot pair other Bluetooth devices. To pair another device,
disable the current connection and try to pair the new connection
with a different Bluetooth device..
7
Solutions