Advertisement
5GHz 2x2 Outdoor Omni 10dBi with 1M N-Plug to SMA-Plug NFC200 Low Loss RF Cables Pole/Wall Mount Antenna
Installation:
1. Mount the antenna on the brackets according to the Mounting diagram. Make sure
the horizontal omnidirectional of the ANT-10AO antenna with a beamwidth (H plane)
of 360 ̊ , a beamwidth (E plane) of 15 ̊ a nd downtilt of 15 ̊ .
2. Mount the ANT-10AO antenna on the antenna on the mast supplied by customer
according to the Mounting diagram.
3. Test the antenna with equipment to make sure the antenna receive the best signal first,
then lock all the screws and seal the connector between ANT-10AO antenna and NFC-NSP-
1M RF cables with a waterproof cap.
No Surge arrester installation
Installation using a Surge arrester
3
Installation Guide
Advertisement
