Advertisement
Bluetooth 4.2
Micro SD card
Micro USB USB
FM radio FM
Handsfree
Audio input
LED flashlight
Button name | Bluetooth mode | FM radio mode | Audio mode |
Power ON / OFF | Switch On/Off to turn on/off the device | ||
Previous / Volume - | Press – Go to previous track | Press – Go to the previous station | Press – Go to previous track |
Hold – Decrease volume | |||
Play / Pause | Press – Stop / Start playback Incoming call: Press – Answer call Hold – Reject call | Press – Turn radio On / Off Hold – Search for stations | Press – Stop / Start playback |
Next / Volume + | Press – Go to the next track | Press – Go to next station | Press – Go to the next track |
Hold – Increase volume | |||
Mode | Press – Go to next mode | ||
Light | Press to turn LED light On/Off |
„Power on" - the device was turned on.
„Bluetooth mode. Pair the device." - the unit is in Bluetooth mode and is ready for pairing.
„Paired" - it has been successful paired with a Bluetooth device.
„Radio" - the device is in FM radio mode.
„Audio input" - the unit is in playback mode, ready to play audio recordings from device connected via the 3.5mm jack.
„SD card" - the device is ready to play tracks from a micro SD card.
Press „M" to go to Bluetooth mode. Speaker can be paired with a device which supports Bluetooth.
In the list of active devices the Sentinel SE-1 is displayed as „LAMAX Sentinel SE-1".
Once paired, you will hear the notification „Paired".
If the device is disconnected or the connection is lost you will hear „Bluetooth mode. Pair the device".
Go to mode by pressing „M".
Connect the micro USB cable, which acts as an antenna. To find all available stations hold down the „Play / Pause / Handsfree" button. The device will then scan FM frequencies and store all stations found.
You can then navigate between the stations using the „Previous" and „Next".
Enter mode by pressing „M". Speaker announces „SD card". Sentinel SE-1 then plays the MP3s stored on the micro SD card.
After connecting the audio cable to the AUX jack, it plays music from any connected device.
To use this feature, you must have the Sentinel SE-1 paired via Bluetooth with a smartphone.
Calls can be accepted / rejected in the standard way on the phone or accepted by pressing the „Handsfree" button and rejected by holding the „Handsfree" button.
Pressing the „Light" button turns the LED light on / off.
The speaker can be charged using the included micro USB cable from any charger with a 5V USB output or from any computer equipped with a 5V USB output. Charge the device only under supervision.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download LAMAX Sentinel SE-1 - Wireless Portable Speaker Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Sentinel SE-1 that isn't answered in the manual? Leave your question here.