Advertisement
Quick Links
Advertisement
Summary of Contents for Varia AKU
- Page 1 v v ar arí í ® BREW DIFFERENT ELECTRONIC SCALE USER MANUAL variabrewing.com...
- Page 2 It is recommended to use • The internal structure of the equipment 5V, 1a-2a adapter for charging. is precise, and it is prohibited to • Please place AKU on a level and disassemble without permission. stable surface. • Do not place objects weighing more •...
-
Page 3: Product Overview
Product Overview: Weighing Platform Silicone Pad Power Button Tare Button LED Display USB-C Port On/Off Switch Varia AKU Scale | User Manual... - Page 4 ∆ ) + automatic timing mode. Setting mode In the weighing zeroing state, press it for more than 6 times to enter the set setting mode, and set the user calibration and automatic shutdown time. Varia AKU Scale | User Manual...
- Page 5 After the automatic peeling of the placed container, the water flow is detected and the weighing is started. After the water flow stops, the final weight is displayed. Varia AKU Scale | User Manual...
- Page 6 After the weight/vessel is placed and is stable, the weight will be automatically zeroed. When the water flow is detected, the timer will automatically start timing. When the water flow stops, the timer will also stop timing. Varia AKU Scale | User Manual...
- Page 7 In this mode, users can set 100g calibration (c-2er0) and automatic shutdown time (sleep). To enter the settings for your AKU scale make sure that your scale is placed onto a level and stable surface and is in Mode A; must be set to grams and the scale must be zeroed.
- Page 8 “c-2ero” will flash after the calibration mode has been enabled and then the display will show “PUT 100g”. 4. Place the 100g calibration weight in the centre of the scale. 5. When “PASS” is displayed on the screen, the calibration procedure has been successful. Varia AKU Scale | User Manual...
- Page 9 1. Press the tare key 6 times in a row and you will see the following displayed on the screen. 2. At this time, press the tare key to cycle the sleep timer options between 5,10,20,30,60 or OFF. continued over Varia AKU Scale | User Manual...
- Page 10 3. To save this setting press and hold the power button until the following is displayed on the screen. Charging • To charge the AKU Scale, plug the USB-C cable into the port located on the back of the scale body and next to the on/off switch. •...
- Page 11 When charging, the weighing function cannot be used. When the battery is fully charged, all battery symbols flash at the same time. Varia AKU Scale | User Manual...
- Page 12 Limited warrants this product against any defects caused by defective material or workmanship. Only the original user is covered by this warranty when a AKU Electronic Scale is purchased from an authorized reseller, and when is fitted with the factory standard parts.