GAC MOTOR EMPOW Manual

page of 356

/ 356
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Foreword

Thanks for choosing the vehicle manufactured by GAC Motor. For a better driving pleasure, please read the Owner's Manual carefully. This manual

covers all instructions necessary for you to fully understand the operation methods and precautions of the vehicle. Proper operation of the vehicle

can improve driving safety and prolong the service life.

The Warranty and Maintenance Manual supplied with the vehicle clearly describes the warranty services provided by GAC Motor and the routine

maintenance of the vehicle. Please read this manual carefully to know your rights and responsibilities.

After reading this manual, please store it with the vehicle for future reference.

In case of any doubts about this manual, please contact the GAC Motor authorized shop for detailed explanation.

If you have any suggestions or recommendations, please contact GAC Motor through the customer service hotline: 400-813-6666

We are grateful for your support and love for GAC Motor. Have a nice drive!

Table of Contents

Summary of Contents for GAC MOTOR EMPOW

Page 1 Foreword Thanks for choosing the vehicle manufactured by GAC Motor. For a better driving pleasure, please read the Owner’s Manual carefully. This manual covers all instructions necessary for you to fully understand the operation methods and precautions of the vehicle. Proper operation of the vehicle can improve driving safety and prolong the service life.
Page 2 Safety Instructions The safety of you and others is crucial, so Those important safety instructions are available in many forms, including: driving safely is an important responsibility of ● Safety signs - pasted on the vehicle. the driver. ● Safety notes - the texts marked with warning symbol and warning words including In order to make clear the safety precautions, “WARNING”, “CAUTION”...
Page 3: Table Of Contents
Contents 1. Important safety precautions ......1 4. Operation of systems and equipment ... 36 4.1 Cab ..............36 2. Picture index ............3 4.1.1 Steering wheel ........36 2.1 Exterior ..............3 4.1.2 Instrument cluster ........38 2.2 Interior ...............7 4.1.3 Indicator lamp ......... 55 4.2 Vehicle locking and unlocking ......59 3.
Page 4 4.4 Seats and storage facilities ......110 models with AV host) ......158 4.6.11 System setting (applicable for AVNT 4.4.1 Headrest ..........110 models) ..........163 4.4.2 Front seat ..........111 4.7 GAC Motor T-BOX*........169 4.4.3 Rear seat ..........115 4.7.1 General description ....... 169 4.4.4 Storage facilities ........116 4.7.2 Download APP on mobile phone ..170 4.4.5...
Page 5 Contents 5.3.3 Anti-lock brake system (ABS) ....198 5.7 Driving skills ..........268 5.3.4 HHC (HHC) .......... 199 5.7.1 Traffic safety inspection ....... 268 5.4 Driver assistance system ......200 5.7.2 Driving in running-in period ....268 5.4.1 Cruise control system * ......200 5.7.3 Driving essentials ......... 270 5.4.2 ACC * ...........
Page 6 Contents 7. Technical data ..........305 9. Environmental protection information ..341 7.1 Identifications ..........305 9.1 Environmental protection information code ...341 7.2 Dimensions & parameters of vehicle .....307 9.2 Environmental protection information ....342 7.3 Vehicle mass, engine and fluid parameters ...308 7.4 Parameters of transmission, chassis and lamps .............
Page 7: Important Safety Precautions
1. Important safety precautions 1. Important safety precautions Be sure to fasten the seat belt correctly Never drink and drive ◆ ◆ The seat belt is the best protection device in the event of a Drinking alcohol, even a little, will reduce your response capability, collision.
Page 8 Event data recorder (EDR) EDR data disclosure This vehicle is equipped with an event data recorder (EDR). The EDR Except for the following circumstances, GAC Motor will not disclose is mainly designed to record data in the event of certain collisions the data recorded in the EDR to third parties: (such as airbag deployment or collision with a barrier), so as to help ●...
Page 9: Picture Index
2. Picture index 2. Picture index 2.1 Exterior Model with horizontal grill ① Wiper Replacing front windshield wiper blades => See page 289 ② Front combination lamp Turning on lamps => See page 94 Specifications of front combination lamp bulbs => See page 313 ③ Exterior rearview mirror => See page Side turn signal lamp => See page Specifications of side turn signal lamp...
Page 10 2. Picture index Model with vertical grille ① Wiper Replacing front windshield wiper blades => See page 289 ② Front combination lamp Turning on lamps => See page 94 Specifications of front combination lamp bulbs => See page 313 ③ Exterior rearview mirror => See page Side turn signal lamp => See page 94 Specifications of side turn signal lamp => See page 313 ④...
Page 11 2. Picture index ① High-mounted stop lamp Specifications of high-mounted stop lamp => See page 313 ② Rear combination lamp Specifications of rear combination lamp bulbs => See page 313 ③ Fuel tank cap => See page 281 ④ Rear towing eye => See page 337 ⑤ License plate lamp Specifications of license plate lamp => See page 313 ⑥...
Page 12 2. Picture index Engine compartment ① Intercooler coolant reservoir => See page ② Oil filler cap => See page 285 ③ Brake fluid reservoir => See page 291 ④ Battery => See page 292 ⑤ Engine compartment power distribution unit => See page 325 ⑥ Oil dipstick => See page 284 ⑦ Windshield washer fluid reservoir => See page 288 ⑧ Expansion tank => See page 287...
Page 13: Interior
2. Picture index 2.2 Interior ① Sun visor => See page 109 ② Front dome lamp => See page 100 Power sunroof control button* => See page 89 SOS button * => See page 171 ③ Interior rearview mirror => See page 106 ④ Front passenger’s frontal airbag => See page 20 ⑤ Accelerator pedal ⑥ Brake pedal ⑦...
Page 14 2. Picture index ① Inside handle => See page 77 ② A/C air outlet => See page 136 ③ Steering wheel => See page 36 Steering wheel buttons => See page 37 Driver’s frontal airbag => See page 19 Paddle shifter* => See page 180 ④ AV system => See page 137 ⑤ Passenger’s power window control button => See page 87 ⑥ Glove box opening handle => See page ⑦ Instrument panel front storage compartment => See page 116 Mobile phone wireless charging area*...
Page 15 2. Picture index ① Instrument panel left switch block Manual headlamp leveling knob => See page 98 Trunk lid unlocking button => See page Fuel tank cap unlocking button => See page 281 ESP OFF button => See page 196 ② Lamplight combination switch => See page 94 ③ Instrument cluster => See page 38...
Page 16 2. Picture index ① Volume adjustment/display OFF button => See page 137 ② Transmission gearshift lever => See page ③ AUTO HOLD button => See page 195 ④ EPB button => See page 192 ⑤ “P” button => See page 178 ⑥ Driving mode knob => See page 179 ⑦ START/STOP button => See page 174...
Page 17: Instructions For Safe Operation
3. Instructions for safe operation 3. Instructions for safe operation 3.1 Safe driving The following inspections must be carried out WARNING before driving: 3.1.1 General description The following inspections must be carried W h e n i n s t a l l i n g t h e d r i v e r ’s f l o o r out before driving: This section introduces important information, mat, please observe the following...
Page 18: Correct Sitting Posture Of The Driver And Passengers
3. Instructions for safe operation 3.1.2 Correct sitting posture of Correct sitting posture of the passengers WARNING the driver and passengers To guarantee the safety of the passengers and reduce the risk of casualties, the passengers ● It is forbidden to install a child safety Correct sitting posture of the driver should: seat in the front passenger’s seat.
Page 19: Seat Belt
3. Instructions for safe operation 3.2 Seat belt In the event of a collision, the seat belt will Consequences of not fastening the seat belt assist other safety systems in simultaneously absorbing the energy generated by the 3.2.1 Why must you fasten the collision, further reducing the injuries suffered seat belt by the driver and passengers.
Page 20 3. Instructions for safe operation Even if the vehicle speed is very low, the force Rear passengers must also fasten the seat acting on the human body in the event of a belts correctly, otherwise they will be thrown collision is so great that the occupant cannot forward when an accident occurs.
Page 21: Seat Belt
“ON” position: ● If the alarm remains on after the seat GAC Motor authorized shop for inspection in If the driver or front passenger does not belt is fastened correctly, it means that time.
Page 22 Pull the seat belt and confirm that the lock the driver or passenger and enable him or GAC Motor authorized shop for repair in tongue is properly locked. her to maintain a correct sitting posture to time.
Page 23 3. Instructions for safe operation Unfastening the seat belt Pregnant women must fasten the seat belts WARNING correctly To reduce the risk of injury during emergency braking or accidents, please observe the following precautions: ● Before driving, make sure that all occupants have properly fastened the seat belts.
Page 24: Supplemental Restraint System (Srs)
3. Instructions for safe operation 3.3 Supplemental restraint system (SRS) Depending on vehicle configurations, the deployment positions of the SRS are as shown below: ① Front seat frontal airbags. ② Front seat side airbag*. ③ Side curtain airbag*. NOTE The airbag will produce a little harmless smoke when deployed, which is normal.
Page 25 ● W h e n t h e S R S i s f a u l t y, p l e a s e completes self-test. contact the GAC Motor authorized shop for inspection; otherwise, the...
Page 26 3. Instructions for safe operation In the event of a severe frontal collision The front seat frontal airbags might not be where the triggering condition is met, the triggered in the following cases: frontal airbags will be triggered by the system The vehicle power switch set to “ACC”...
Page 27 3. Instructions for safe operation Front seat side airbag* In the event of a severe side collision where The front seat side airbags might not be the triggering condition is met, the side airbags triggered in the following cases: on the side where the vehicle collides will be The vehicle power switch set to “ACC”...
Page 28 3. Instructions for safe operation Side curtain airbag* The side curtain airbags might not be triggered in the following cases: The vehicle power switch set to “ACC” or “OFF” position. 100% frontal collision. WARNING Minor side collision. Rear-end collision. The front seats are equipped with side airbags.
Page 29: Cases Where The Airbags May Deploy
3. Instructions for safe operation 3.3.1 Cases where the airbags may deploy Nose-down to the ground when the vehicle crosses a deep groove. Collision with roadside protrusions, curbs, etc. Nose-down to the ground when the vehicle runs down a steep slope.
Page 30: Cases Where The Airbags Might Not Deploy
3. Instructions for safe operation 3.3.2 Cases where the airbags might not deploy Collision with concrete pillars, trees or other elongated objects. Rear-end collision with the lower rear end of large truck. Rear-end collision by other vehicles. Collision with a wall or another vehicle, other than frontal collision.
Page 31: Child Restraint
3. Instructions for safe operation 3.4 Child restraint WARNING WARNING 3.4.1 General description ● Do not install any rear-facing child ● Never leave children alone in the The child must sit in a rear seat, and a suitable safety seats on seats with frontal vehicle! child safety seat should be selected according airbags!
Page 32: Child Safety Seat
3. Instructions for safe operation 3.4.2 Child safety seat Classification of child safety seats (for reference only): Group 0/0+ child safety seat: Suitable for infants weighing less than 13 Group I child safety seat: Suitable for toddlers weighing between 9kg and 18kg. For children weighing up a.
Page 33 3. Instructions for safe operation W e l l d o n A n g e l a 2 n d G e n e r a t i o n i s recommended for Group I child safety seat, and the product model is WD002-ZJC.
Page 34: Information About Child Safety Seat
3. Instructions for safe operation 3.4.3 Information about child safety seat Information about the applicability of different seating positions for child restraint systems: Mounting position Weight group Front passenger’s seat Outboard rear seats Center rear seat Group 0: <10 kg Group 0+: <13 kg Group I: 9~18 kg U/UF/L Group II: 15~25 kg Group III: 22~36 kg Note: The uppercase letters in the table are defined as follows: U= The “general”...
Page 35 3. Instructions for safe operation ISOFIX mounting positions for ISOFIX child safety seats Mounting position Weight group Size class Fixture module Front passenger’s seat Outboard rear seats Center rear seat Carry-cot ISO/L1 ISO/L2 Group 0: <10 kg ISO/R1 ISO/R1 Group 0+: <13 kg ISO/R2 ISO/R3 ISO/R2...
Page 36: Correct Installation Of Child Safety Seat
3. Instructions for safe operation 3.4.4 Correct installation of child Installation of child safety seat by three- point seat belt safety seat The child safety seat is installed by three-point seat belt, ISOFIX system, or LATCH system. To ensure a better protection effect and prevent the headrest from affecting the performance of the child safety seat during use, it is recommended to remove the headrest of the seat on which the child safety seat is installed.
Page 37 3. Instructions for safe operation Grasp the shoulder belt near the buckle Place the seat belt correctly and push 6. Shake the child safety seat back and and pull it up to tension the lap belt. At this the tab up. Make sure the seat belt is not forth, left and right to make sure it is firmly time, press the child safety seat with your twisted.
Page 38 3. Instructions for safe operation Installing ISOFIX System The rear seats of this vehicle are equipped Locking clip with the LATCH system, and thus suitable for the LATCH or ISOFIX child safety seats. The installation instructions of the LATCH child safety seat are as follows. WARNING ● The child safety seat anchorages installed in this vehicle can be used...
Page 39 3. Instructions for safe operation The installation instructions of the LATCH child NOTE safety seat are as follows. ● If the rear-facing child safety seat is used, the headrest shall be adjusted to the lowest position. ● seat backr, remove the headrest. seat back, remove the headrest.
Page 40: Exhaust Gas Hazard
● When the engine is started for a long vehicle. time in a confined space (such as Please contact the GAC Motor authorized shop a garage, etc.), carbon monoxide will quickly accumulate, resulting in to check whether the exhaust system is normal...
Page 41: Safety Label
If the label comes off or is difficult to read, please go to the GAC Motor authorized shop in time for replacement. NOTE In case of any discrepancy in the illustrated location or quantity of the labels, the actual vehicle shall prevail.
Page 42: Operation Of Systems And Equipment
4. Operation of systems and equipment 4. Operation of systems and equipment 4.1 Cab WARNING 4.1.1 Steering wheel ● During driving, the driver’s hands should always grasp the outer ring Adjustment of the steering wheel position of the steering wheel (9 o’clock and 3 o’clock positions).
Page 43 4. Operation of systems and equipment Buttons on steering wheel ② AV system control button => See page ● Voice button => See page 138 ● Custom button* => See page 139 ● Exhaust sound button* => See page 188 ③ The left buttons include the control buttons of the instrument cluster display and the cruise control buttons: Control buttons of the instrument cluster display: ●...
Page 44: Instrument Cluster
4. Operation of systems and equipment 4.1.2 Instrument cluster Instrument cluster with 7-inch TFT display - sport theme (I)* ① Engine coolant temperature gauge ② Outside temperature indication ③ Tachometer ④ Speedometer ⑤ Time display ⑥ Fuel gauge ⑦ Driving mode ⑧ Gear display...
Page 45 4. Operation of systems and equipment Instrument cluster with 7-inch TFT display - sport theme (II)* ① Engine coolant temperature gauge ② Outside temperature indication ③ Instrument cluster display ④ Tachometer ⑤ Speedometer ⑥ Time display ⑦ Fuel gauge ⑧ Driving mode ⑨ Gear display...
Page 46 4. Operation of systems and equipment Instrument cluster with 7-inch TFT display - full screen theme* ① Engine coolant temperature gauge ② Outside temperature indication ③ Tachometer ④ Instrument cluster display ⑤ Speedometer ⑥ Time display Cumulative driving ⑦ Fuel gauge (Reset by pressing and holding OK button) ⑧...
Page 47 4. Operation of systems and equipment Instrument cluster with 7-inch TFT display - sport + theme* ① Engine coolant temperature gauge ② Outside temperature indication ③ Tachometer ④ Speedometer ⑤ Time display ⑥ Fuel gauge ⑦ Gear display ⑧ Driving mode...
Page 48 4. Operation of systems and equipment 10.25-inch instrument cluster - high-tech theme* ① Instrument cluster display ② Outside temperature indication ③ Time display ④ Speedometer ⑤ Fuel gauge ⑥ Gear display ⑦ Driving mode ⑧ Engine coolant temperature gauge...
Page 49 4. Operation of systems and equipment 10.25-inch instrument cluster - organic theme* ① Instrument cluster display ② Outside temperature indication ③ Tachometer ④ Speedometer ⑤ Time display ⑥ Entertainment information ⑦ Fuel gauge ⑧ Gear display ⑨ Driving mode ⑩...
Page 50 4. Operation of systems and equipment 10.25-inch instrument cluster - full map theme* ① Instrument cluster display ② Outside temperature indication ③ Time display ④ Fuel gauge ⑤ Speedometer ⑥ Gear display ⑦ Driving mode ⑧ Engine coolant temperature gauge ⑨...
Page 51 4. Operation of systems and equipment 10.25-inch instrument cluster - sport + theme* ① Engine coolant temperature gauge ② Outside temperature indication ③ Tachometer ④ Speedometer ⑤ Time display ⑥ Fuel gauge ⑦ Gear display ⑧ Instrument cluster display ⑨...
Page 52 4. Operation of systems and equipment Tachometer Engine coolant temperature gauge Speedometer The tachometer is used to indicate the current The engine coolant temperature gauge is The speedometer displays the current speed engine speed, in 1,000 r/min. used to indicate the current temperature of the of the vehicle in km/h.
Page 53 4. Operation of systems and equipment Range Current driving... Cumulative driving The fixed position of the range is usually displayed in the lower right corner of the Cumulative driving Current driving... (Reset by pressing and screen, and the indicated icon is the fuel holding OK but-ton) indicator lamp. Traveled distance 9999km When the range is less than 50km or the Traveled distance 999.2km...
Page 54 4. Operation of systems and equipment Driving information (10.25 inch instrument ● Cumulative driving: It indicates the driving Press the “VIEW” button to enable the cluster) information (including the cumulative 7-inch instrument cluster to cycle through distance, the average fuel consumption “Sport theme, Full screen theme, Sport + and the driving time) of the vehicle since theme”. the last reset, which can be reset by Press the “VIEW”...
Page 55 4. Operation of systems and equipment Menu setting Users can choose km, L/100km or km, Reset maintenance reminder km/L or mpg (Imperial units), mi or Click the “Reset” button to reset the mpg (US units), mi as the unit of fuel maintenance reminder mileage.
Page 56 4. Operation of systems and equipment G-force meter Timer NOTE ● If menu setting is carried out when the G-force meter vehicle speed is not zero, the alarm Timer Steering message “Safe driving tip: setting needs wheel to be performed when the vehicle stops” will be displayed; if the alarm message is displayed for more than 5s, the instrument cluster will automatically switch to the driving information screen.
Page 57 4. Operation of systems and equipment Vehicle state Energy consumption trend graph Navigation information * Energy Vehicle state consumption trend Current driving... Average fuel consumption 19.1L/100km Ve h i c l e s t a t u s : I t c o n t a i n s t h e t i r e Energy consumption trend graph reflects T h e n a v i g a t i o n i n f o r m a t i o n c a n b e temperature, the tire pressure, the status...
Page 58 4. Operation of systems and equipment ADAS* Alarm message NOTE ● The ACC, FCM, LKA and ICA information Driving are displayed on this screen. Alarm center assistance ● Only the technology theme of 10.25-inch meters supports the displaying of the left and right lane marking information. Tire pressure is abnormal. Please stop and check.
Page 59 4. Operation of systems and equipment If any alarm message appears, press “OK” Call information NOTE button on the left of the steering wheel to confirm the message. Some messages The organic theme of instrument cluster will be stored in the alarm center. If with 10.25-inch display is illustrated here there is no operation after 5 s, the alarm and for reference only.
Page 60 4. Operation of systems and equipment AV and entertainment information Multimedia information is not available When the AV system is turned on, the current playback information will be When the vehicle power switch is set to displayed on the AV and entertainment “ON”...
Page 61: Indicator Lamp
If the red indicator lamp comes on, it indicates that the LKA is faulty. In that case, please go to the LDW status indicator lamp* GAC Motor authorized shop for inspection in time. If the green indicator lamp comes on, it indicates that the LKA is working normally or intervenes with Green the steering wheel for deviation correction.
Page 62 Designation Color Function If the yellow indicator lamp comes on, it indicates that the FCM is faulty. In that case, please go to the Yellow GAC Motor authorized shop for inspection in time. FCM indicator lamp * If the red indicator lamp flashes, it indicates that the FCM is being triggered and activated. Green If the green indicator lamp comes on, it indicates that the BSD system is activated.
Page 63 4. Operation of systems and equipment Icon Designation Color Function When the left turn signal indicator lamp flashes alone, it indicates that the left turn signal lamp of the Left turn signal indicator lamp and Green vehicle is on. When the hazard warning lamp switch is pressed, the left/right turn signal indicator hazard warning lamp lamps and all turn signal lamps will flash simultaneously. If the red indicator lamp comes on, it indicates that the EPB is applied. Electric park brake (EPB) status If the red indicator lamp flashes, it indicates that the EPB is engaged partially or faulty.
Page 64 Therefore, you should read carefully and understand the meaning of each indicator or warning lamp. In case of a fault, please go to or contact the GAC Motor authorized shop for inspection in time.
Page 65: Vehicle Locking And Unlocking
If the key needs to be re-customized, control key. the remote control key is deactivated, please inform the GAC Motor authorized shop of you can try to press the buttons on the the key barcode. If the key barcode is missing,...
Page 66 4. Operation of systems and equipment Liftgate unlocking button ① Button operation NOTE If this button is pressed once within the effective range of the remote control key, ● If this button is pressed and held for all doors will be locked; if this button is 2 s, the four door windows will be pressed and held for 2 s, the windows will automatically closed.
Page 67 4. Operation of systems and equipment ② Button operation ③ Button operation NOTE If this button is pressed once within the If this button is pressed twice within effective range of the remote control key, the effective range, the trunk lid will be ● When the doors are unlocked, the turn all doors will be unlocked;...
Page 68 It is rec- then press and hold the button ommended to go to the GAC Motor authorized remotely stop the engine. shop for the battery re-placement. ● To remotely stop the engine, keep the...
Page 69: Bluetooth Key
Bluetooth key The activation and authorization/vehicle control of the Bluetooth virtual key function depend on the GAC Motor APP. When the vehicle is equipped with the Bluetooth key function, you can download the GAC Motor APP through your mobile phone and follow the activation process to activate the Bluetooth key function.
Page 70 To use the Bluetooth key, you need to open at your own risk. the GAC Motor APP on the mobile terminal of the Bluetooth key. If <GAC Motor> APP is shut down due to the automatic shutdown of the mobile phone system or your personal...
Page 71 Bluetooth key, please do ● The virtual Bluetooth key function is The Bluetooth key supports the controls of the not deactivate GAC Motor APP through only used as a supplement to those following parts: background cleaning on the mobile for convenience for your travel.
Page 72 4. Operation of systems and equipment 4.2.2.3 Basic operations of Bluetooth key Click the “not activated” column of bluetooth Bluetooth activation activation status to check whether the vehicle Vehicle settings Bluetooth connection pairing is currently connected: ① Activation status-not activated Yes, enter the Start Activation page.
Page 73 4. Operation of systems and equipment APP home page Bluetooth key mode After vehicle binding is completed, activation is After successful activation, the screen of required for the first use.. vehicle control via smart Bluetooth key will be entered. Use your mobile phone to open the APP, After entering the APP for the first and set the vehicle power switch to “ON”...
Page 74 4. Operation of systems and equipment For each reconnection after disconnection Bluetooth vehicle control NOTE of mobile phone APP from Bluetooth ① Lock module, the APP will perform a “safety If no operation is carried out within 2 initialization” to ensure the safety of your minutes after unlocking, the vehicle will be vehicle.
Page 75 4. Operation of systems and equipment ② Window ③ sunroof * NOTE ● After the click, the window starts to move. Please ensure that no people/ object will be pinched or obstruct the window movement. ● During the window movement, if you click the reverse movement request, the window will perform the latest movement request.
Page 76 4. Operation of systems and equipment ④ Trunk NOTE NOTE ● After the click, the sunroof starts to ● For models without power liftgate, there move. Please ensure that no people/ is only one button “Open trunk” for the object will be pinched or obstruct the opening of trunk.
Page 77 4. Operation of systems and equipment ⑤ Horn sounding ⑥ Lamp flashing NOTE ● After clicking “Enable horn sounding”, the horn of the vehicle starts to sound loud, which may cause nuisance, Use this function with caution. ● After the sounding of horn is enabled, it will be disabled automatically after 30s. Click the horn button on the home page to Click the lamp flashing button on the home enter the page, and then operate the horm.
Page 78 4. Operation of systems and equipment PEPS system CAUTION ● After using the PEPS function to lock the doors, please wait for 4 s before using it again to unlock the doors. ● If you touch the unlocking area and the locking button at the same time, priority will be given to the unlocking function.
Page 79 4. Operation of systems and equipment ENGINE START/STOP button Setting of Bluetooth key NOTE Function description ● During the startup process, please make Take the mobile phone with activated Bluetooth sure that the mobile phone is placed key and connect it with Bluetooth. Enter the near the center console armrest to vehicle and step on the brake pedal to ensure ensure that the device in the vehicle can...
Page 80 4. Operation of systems and equipment Bluetooth Calibration Calibration countdown Bluetooth Personalization Click to enter the bluetooth calibration page to Go to the Bluetooth calibration countdown Bluetooth personalization settings include: set up: page, click Start Calibration, start the 30s Passive unlocking and locking function countdown, and start calibration at the same settings*, reminder of leaving setting.
Page 81 4. Operation of systems and equipment Passive unlocking/locking function settings* 10. Bluetooth Fix 11. Reminder for leaving W h e n t h i s f u n c t i o n i s d e a c t i v a t e d , touching the door handle unlocking/ locking area with the Bluetooth key will not result in an unlocking/locking response.
Page 82 4. Operation of systems and equipment 12. Bluetooth key expiration reminder CAUTION CAUTION ● The function of reminder for leaving is ● After receiving the “Bluetooth update designed for giving reminder of vehicle reminder”, the user should do the state only, and will not close windows or update in time to avoid the situation that lock doors automatically.
Page 83: Emergency Mechanical Key
4. Operation of systems and equipment 4.2.3 Emergency mechanical key 4.2.4 Door lock system Door inside handle Emergency mechanical key Central locking button If the vehicle is locked, pull any door handle once as arrowed to unlock that door only; pull the inside handle of that Press the locking button ①...
Page 84 4. Operation of systems and equipment Door lock hole NOTE When the child safety lock is activated (=> See page 79), even if the rear door latch is unlocked, the inside handle cannot open the rear door. In this case, the rear door shall be opened from outside. And do not pull the inside handle with force to avoid damages.
Page 85 4. Operation of systems and equipment Child safety lock Automatic unlock function NOTE If the vehicle stops with the doors locked and the vehicle power switch set to “OFF” position, ● The child safety lock can prevent children the four doors will be automatically unlocked. in the vehicle from unintentionally opening the rear door and thus reduce the risk of NOTE accidents.
Page 86 4. Operation of systems and equipment Speed sensing door lock Intelligent active unlock NOTE If this function is activated with all doors closed, the vehicle will be automatically locked ● This function can be activated or at certain vehicle speed. deactivated by setting the “System Settings → Body Accessories → Lock/ With the vehicle power switch set to “ON”...
Page 87 4. Operation of systems and equipment Intelligent active lock If the intelligent active lock function is NOTE activated and the key remains in an area within 2 m from the vehicle, the indicator ● This function can be activated or lamp of the intelligent remote control key deactivated by setting the “System will flash continuously until the doors are...
Page 88: Door
4. Operation of systems and equipment 4.2.5 Door The intelligent active lock function will not be CAUTION activated in case of the followings: The intelligent remote control key is in the ● The intelligent active lock function vehicle. cannot automatically close the door The vehicle power switch is set to “ACC”...
Page 89: Trunk Lid
4. Operation of systems and equipment 4.2.6 Trunk lid Easy Open function of trunk lid* WARNING When the vehicle power switch is in the “OFF” Unlocking of trunk lid position and the four doors are closed, if the ● Make sure that all doors are closed user carries the intelligent remote control key before driving, otherwise accidents to enter the trunk Easy Open area, about 0.5 m...
Page 90 4. Operation of systems and equipment Emergency unlocking of trunk lid Locking of trunk lid NOTE ● This function can be activated or deactivated by setting the AV system “System Settings → Body Accessories → Lock/Unlock → Trunk Easy Open”. ● If you carry the intelligent remote control key to approach the trunk within about 0.5 m, the high-mounted stop lamp will flash 4 times, and after 3.2 s, the trunk lid will be unlocked.
Page 91: Hood
4. Operation of systems and equipment 4.2.7 Hood NOTE Opening of engine hood If the trunk lid is ajar, there will be a corresponding alarm indication on the instrument cluster; then when the vehicle speed exceeds 5 km/h, there will be a buzzer sound.
Page 92: Power Window
4. Operation of systems and equipment 4.2.8 Power window Driver’s power window control button WARNING The power window can be operated when the ignition is in the “ON” position, and stays ● Before driving, ensure that the engine operable within 30 s after the ignition is hood is closed and locked, otherwise, switched from the “ON”...
Page 93 4. Operation of systems and equipment If the button ① is pulled up to the first If you press the passenger’s window Passenger’s power window control button lock button ⑤ , the button indicator lamp stop position, the power window will be lifted for closing until the button is will come on and the passenger’s power released or the window reaches the...
Page 94 ● If the power window system fails, please go to the GAC Motor authorized shop for inspection in time.
Page 95: Power Sunroof
4. Operation of systems and equipment 4.2.9 Power sunroof * Sun visor * Opening or closing of sunroof The power sunroof can be operated when the vehicle power switch is set to “ON” position; and stays operable within 30 s after the ignition is switched from the “ON”...
Page 96 4. Operation of systems and equipment If you want to close the sunroof completely, Tilting of sunroof Remote control push the sunroof switch ① forward and When you press and hold the button on the keep it for a certain period of time, the remote control key with IGN OFF, the sunroof sunroof automatically moves to the fully will be closed by remote control, and when...
Page 97 4. Operation of systems and equipment Control of “soft switch” on center console Speech operations Anti-pinch function of sunroof * display The speech operations can be used to open, The anti-pinch function is available for the close and tilt the sunroof: closing of the sunroof: If you say “Open sunroof”, the sunroof When the sunroof is closed by sliding, if the anti-pinch function is activated, the...
Page 98 4. Operation of systems and equipment Locking-sensitive sunroof closing function Rain-sensitive sunroof closing function * WARNING If the vehicle is locked (by remote control, If you stop the engine, close the doors and intelligent distance-sensitive locking and leave the vehicle without closing the sunroof, ● T h e a n t i - p i n c h f u n c t i o n o f t h e bluetooth locking) with sunroof opened, the the system will detect the external environment sunroof cannot prevent pinching of...
Page 99: Basic Operation Of Body Anti-Theft System
10 times in one cycle. CAUTION If the power sunroof fails, please go to the GAC Motor authorized shop for inspection in time.
Page 100: Lamps And Vision
If you have any doubt, please contact the GAC dry environment, turning on the lamps Motor authorized shop. or driving the vehicle, but may recur. ● If there are a lot of water drops or water ingress in the lamps, please contact the GAC Motor authorized shop for inspection. ① Lamp switch ② Fog lamp switch...
Page 101 GAC Motor authorized When the vehicle power switch is in the shop for inspection in time. When the vehicle power switch is in the “ON”...
Page 102 GAC Motor authorized shop for Position lamp ● I f t h e a u t o m a t i c h e a d l a m p o n / o ff inspection in time.
Page 103 4. Operation of systems and equipment Low beam NOTE NOTE Turn the lamplight control switch to the position to turn on the low beam. If you forget to turn off the position lamps ● The high beam may cause dazzling when the ignition is switched to the “OFF” to drivers of oncoming vehicles at High beam position and the vehicle is not locked,...
Page 104 4. Operation of systems and equipment Manual headlamp leveling Follow Me Home Fog lamp switch Within 10 minutes after switching the ignition to the “OFF” position, if you turn the lamplight control switch from the “OFF” position to other positions and then back to the “OFF” position within 2 s, the headlamp delay off function will be activated.
Page 105 4. Operation of systems and equipment Hazard warning lamp The hazard warning lamp shall be turned Emergency braking warning lamp on in the following cases so as to attract the When the vehicle is traveling at a high attention of persons on the road and reduce speed and the emergency brake is the risk of traffic accidents: applied, the brake lamps will come on and...
Page 106: Interior Lamps
4. Operation of systems and equipment 4.3.2 Interior lamps Delay off function of interior lamps Dome lamp W h e n t h e d o m e l a m p s a r e o ff a n d t h e Automatic light-on function of dome lamps automatic light-on function of dome lamps is activated: If the ignition is in the “OFF”...
Page 107 4. Operation of systems and equipment Front dome lamp Rear dome lamp* Trunk lamp If the trunk lid is opened, the trunk lamp will come on automatically. If the trunk lid is closed, the trunk lamp will go out automatically. Vanity mirror lamp* If the vanity mirror cover is opened, the vanity mirror lamp will come on...
Page 108 4. Operation of systems and equipment Smart ambient light* Drive mode following When the drive mode following function Operation interface description: is activated, the color of the ambient light and the music rhythm will change Do you want to enable drive mode along with the drive mode.
Page 109: Wiper Combination Switch
4. Operation of systems and equipment 4.3.3 Wiper combination switch When the vehicle power switch is in the “ON” MIST: Continuous wiping position, the wiper combination switch can be If the wiper combination switch is turned operated as follows: to the ① MIST position, the front wiper AUTO position ①...
Page 110 Other Accessories → Auto Wiping”. windshield washer system will be stopped the GAC Motor authorized shop for and the front wiper will wipe once after 6s. Adjust the intermittent wiping speed by inspection in time.
Page 111: Windshield
4. Operation of systems and equipment 4.3.4 Windshield Windshield glass The green sound-insulation and laminated anti-scattering glass is used for the front windshield, which can effectively reduce the personal injury in an accident. WARNING ● Always keep the glass surface clean. ● P l e a s e a f f i x t h e n e c e s s a r y identifications according to local traffic laws, rules and regulations. Do not stick paper or hang objects on...
Page 112: Exterior Rearview Mirror
4. Operation of systems and equipment 4.3.5 Exterior rearview mirror Manual anti-glare interior rearview mirror* Interior rearview mirror Auto dimming interior rearview mirror * CAUTION Manually adjusting the manual anti-glare interior rearview mirror can reduce the light Do not cover the light sensor ② in order to reflected off the mirror surface, thus realizing ensure its normal function.
Page 113 If the function of the exterior rearview mirror rearview mirror. Press the folding button ③ again to fails, please go to the GAC Motor authorized Press the adjusting button ② to adjust unfold the exterior rearview mirror shop for inspection in time.
Page 114 4. Operation of systems and equipment Turning down of exterior rearview mirror Activation of “Reverse Tilt-down” function NOTE when reversing* Set the vehicle power switch to the “ON” position, enter the AV system “System This function is to automatically turn down This function can be activated or deactivated Settings → Body Accessories → Other the exterior rearview mirror at a certain angle by setting the “System Settings → Body...
Page 115: Sun Visor
4. Operation of systems and equipment 4.3.6 Sun visor Defrosting and defogging function * CAUTION ● If there is residual fog or frost after the defrosting and defogging function is deactivated automatically, just press the button again. ● D o n o t k e e p t h e d e f r o s t i n g a n d defogging function on for a long time, otherwise the heater may be damaged due to overheating.
Page 116: Seats And Storage Facilities
4. Operation of systems and equipment 4.4 Seats and storage facilities WARNING 4.4.1 Headrest In order to reduce the risk of accidental casualties, please strictly observe the followings: ● Do not adjust the headrest while driving. ● Always keep the head restraint in its installation position. If the headrest is removed or installed improperly, the driver may be seriously injured in an accident.
Page 117: Front Seat
4. Operation of systems and equipment 4.4.2 Front seat Height adjustment of front seat headrests Power seat * NOTE When measuring the depth of the seat cushion, be sure to adjust the front and rear positions of the seat to the middle of the slide rail and the seat back to the normal operating state (25°).
Page 118 4. Operation of systems and equipment Manual seat* Adjustment of driver’s seat lumbar support* Seat heater* Switch the vehicle power switch to the “ON” position. S w i t c h t h e AV s y s t e m t o t h e a i r Forward and backward adjustment of seat: Press the switch in the direction of arrow conditioning control interface, click the...
Page 119 ● The seat heating function can also be controlled and operated by voice or Off soft button GAC Motor APP. Click the mode soft button in the seat WARNING heating area to turn on the seat heating function.
Page 120 GAC motor or seat back, in order to avoid damaging activated: account, so as to realize the intelligent user the electrical components in the seat.
Page 121: Rear Seat
4. Operation of systems and equipment 4.4.3 Rear seat Nap mode* CAUTION When the vehicle power switch is set to the ON Folding down of rear seat backs position and the transmission is in P gear, the ● When the system is in the nap mode driver can set and save the nap mode position setting state: If any seat motor is not through “Drop-down menu → Nap mode”, and...
Page 122: Storage Facilities
4. Operation of systems and equipment 4.4.4 Storage facilities Rear center console armrest * Instrument panel front storage compartment Storage compartment on door interior trim panel Turn down the central armrest forward to Place small articles here. use it. NOTE Place beverage bottles, map manuals and NOTE other articles here.
Page 123 4. Operation of systems and equipment Instrument panel lower storage compartment Cup holder Rear cup holder* : Rear cup holder: Turn down the central armrest forward and For placing books, ipad, etc. Front cup holder: For placing beverage then place beverage bottles. bottles, water cup, etc.
Page 124 4. Operation of systems and equipment Front passenger’s glove box Front central armrest box Storage bag on the back of front seat Pull the handle to open the glove box and Open the front seat central armrest box Pull open the storage bag to put books, place articles such as file bags.
Page 125: Low Battery Reminder
4. Operation of systems and equipment 4.4.5 Low battery reminder 4.4.6 USB interface/power outlet Information to be know: When the engine is not started, due to Function description: Front power outlet the inability of charging, the use of vehicle electrical equipment (such as radio, lights, The vehicle continuously monitors the battery etc.) will directly consume the battery power, condition.
Page 126 4. Operation of systems and equipment Front USB port Rear USB interface * USB interface at interior rearview mirror * With the ignition in the “ACC” or “ON” With the ignition in the “ACC” or “ON” With the ignition in the “ACC” or “ON” position, a device can be connected p o s i t i o n , a m o b i l e d e v i c e c a n b e position, a device to be charged can be...
Page 127 4. Operation of systems and equipment 4.4.7 M o b i l e p h o n e w i r e l e s s CAUTION charging system* ● To avoid damage to the electrical The mobile phone wireless charging system system of the vehicle, never connect utilizes electromagnetic induction to realize the power generation equipment to a power...
Page 128 4. Operation of systems and equipment Mobile phone wireless charging switch Symbol status NOTE Symbol Color Status NOTE After the mobile phone wireless charging The mobile system is switched on, a symbol will be phone wireless displayed at the position ② on the status charging function bar of interface.
Page 129 4. Operation of systems and equipment Mobile phone wireless charging failure WARNING NOTE Causes Troubleshooting ● P l e a s e d o n o t p l a c e a n y t h i n g ● GAC will not assume responsibility The temperature is too between the mobile phone and the...
Page 130: Trunk
GAC Motor authorized shop ● Articles in the trunk must be fixed, for inspection in time. otherwise they may fly forward and There is a warning triangle in the trunk.
Page 131 4. Operation of systems and equipment Models with tire vulcanizing machine*: Models with spare tire*: There are inflator pump, tire sealant, The driver’s tools and spare tire are under towing hook, and warning triangle under the trunk carpet. the trunk carpet.
Page 132: Accessories And Modification
(ABS) and the tire pressure monitoring system of this vehicle, please be sure to consult the (TPMS) on the vehicle. When additions (such as headrest, seat GAC Motor authorized shop before installing cover, floor mat, sun protection mat, etc.) accessories or replacing parts. are required, inferior additions may contain...
Page 133 ● Improper modification or maintenance GAC Motor parts will seriously damage the o f t h e v e h i c l e m a y w e a k e n t h e...
Page 134: Hvac System
GAC Motor authorized shop for ● T h e A / C s y s t e m c a n a c h i e v e i t s inspection.
Page 135: Hvac System
4. Operation of systems and equipment 4.5.2 HVAC system Manual A/C system * ① M a x i m u m c o o l i n g m o d e b u t t o n / Manual A/C system * temperature control knob ②...
Page 136 4. Operation of systems and equipment Auto A/C system* Auto A/C system* ① Automatic A/C button/temperature control knob ② Air supply mode button ③ Rear windshield/exterior rearview mirror defrost and defog button ④ SYNC button ⑤ Fan speed control knob/OFF button ⑥ Recirculation/fresh air mode button ⑦ Front windshield defrost/defog button ⑧...
Page 137 4. Operation of systems and equipment In auto mode (automatic A/C)*, in order to Fan speed setting NOTE obtain the most satisfactory inside temperature, I f t h e k n o b i s t u r n e d c l o c k w i s e o r it is recommended to set the temperature counterclockwise, the fan speed will increase ● The A/C system can also be controlled...
Page 138 4. Operation of systems and equipment Air circulation (automatic A/C) * Recirculation mode (manual A/C) * CAUTION Recirculation mode Press the button , and when the button indicator lamp is on, the air circulation will Press the button , and when the button ● Long-term recirculation mode will cause enter the recirculation mode.
Page 139 4. Operation of systems and equipment Front windshield defrost/defog function CAUTION If the button is pressed, the button indicator lamp will come on, and the front windshield ● When the temperature is set to the defrost/defog function will be activated. lowest, the defrost/defog function will Press the button again, the button indicator cause the outer surface of the windshield...
Page 140 4. Operation of systems and equipment Rear windshield defrost/defog function Air supply mode In auto mode (automatic A/C)*, the A/C system will automatically control the air supply mode. Press the button to cycle through the If the button is pressed, the button When the outlet air temperature is high, most following air supply modes: indicator lamp will come on, the rear windshield of the air will be directed through the floor...
Page 141 4. Operation of systems and equipment Plasma purifier * A/C scene* 3. Scenario customization T h e u s e r c a n a d d t h e c u r r e n t a i r conditioning status or a custom air conditioning status as a custom scene if required.
Page 142: A/C Air Outlet
4. Operation of systems and equipment 4.5.3 A/C air outlet Panel central air outlet Rear air outlet* Panel side air outlet Toggle the paddle ① up and down to Move the dial tongue up and down, left adjust the air direction. and right ①...
Page 143: Av System
4. Operation of systems and equipment 4.6 AV system 4.6.1 Console audio control button 1. Volume adjustment/display OFF button Vehicle power supply in the “ON” gear, the volume can be adjusted by toggling the roller up and down. Press this key multi-function touch screen enter the screen saver and press this key again to cancel the screen saver.
Page 144: Right Control Button Of Steering Wheel
4. Operation of systems and equipment 4.6.2 Right control button of ② The mobile phone is connected to the Next song/channel switch key host. After the CarPlay/CarLife function is steering wheel * In radio mode, press this button to started, press this key to start or end the automatically search for a valid station CarPlay/CarLife voice.
Page 145: Steering Wheel Custom Button
4. Operation of systems and equipment 4.6.3 S t e e r i n g w h e e l c u s t o m The main functions are: Custom button setting method button* One-click stopwatch Back to Main Interface Music One-click radio station Music fast forward...
Page 146 4. Operation of systems and equipment Main function introduction and user guide Press the “OK” key on the left side of the One-click radio station function, after steering wheel to count times, that is, pressing and holding or pressing custom ①...
Page 147 4. Operation of systems and equipment ⑥ One-button phone function You can hang up the phone with the CAUTION “phone key” at the top of the right side of the steering wheel or the central console ● The control functions of the custom touch screen hang up icon.
Page 148: Basic Operations
4. Operation of systems and equipment 4.6.4 Basic operations Description of AVNT main interface function area: ① Personal account entry Click here to enter the Personal Center Settings interface. ② Smart card area Click the cards to quickly enter the corresponding function interfaces. Cards can be added and sorted in a user- defined way.
Page 149 4. Operation of systems and equipment ⑤ System status bar Drop-down menu bar NOTE S y s t e m s t a t u s , s u c h a s “ W i r e l e s s Charging”, “Bluetooth Connection”, is The AVNT unit is taken as an example in displayed.
Page 150 4. Operation of systems and equipment My Car HICAR* NOTE ● The specific Huawei mobile phone models supported by the HUAWEI HiCar system are subject to the supported mobile phone models published on Huawei’s official website. At present, only Huawei EMUI 10.1 and above and Honor Magic UI 3.1 and above mobile phones support connection.
Page 151 4. Operation of systems and equipment CarLife* NOTE Via CarLife, the in-car system can share functions of mobile phones such as calls, ● ● After the mobile phone system navigation and music. or operating system (Android/IOS) is upgraded, CarLife functions or some NOTE functions may be unavailable.
Page 152 4. Operation of systems and equipment Apple CarPlay on-board (only applicable to When you are in the interface of other Voice AV host models) function, you can enter the Apple CarPlay After the AV system is turned on and works on-board system by clicking the CarPlay normally, wake up the voice recognition engine card or the Apple Carplay icon in the app in the following ways before issuing a voice...
Page 153 4. Operation of systems and equipment After the voice system is woken up, voice Voice settings* control can be performed only after the voice assistant feedback “please speak” is heard, and the system displays the listening status. NOTE The success rate of speech recognition is affected by objective factors, such as environmental noise, network signals, and subjective factors, such as usage habits...
Page 154: Personal Account
Step 2: Register your account on the <GAC Motor> APP. Step 3: Enter the vehicle information on the <GAC Motor> APP and scan the QR code for activation. After the owner is authenticated, the owner’s account login is automatically completed and the main page is entered.
Page 155 4. Operation of systems and equipment Mobile data query Personalization settings Face Recognition You can purchase traffic in the “My Traffic” In the “Personality Settings” area, you can Click “Face ID” in the Personal Center to enter section on the Personal Center page. click to select “Cockpit”, “Ambient Light”, “Air the face ID register interface, and the user can Conditioning” and “Sound Effect” to enter the...
Page 156 4. Operation of systems and equipment Bind key Unbind key Seat/rearview mirror position preservation Users click the “Unbind” soft button in the After the user logs in the account, if the user The user clicks the “Binding Key” soft button personal center, and then click the “OK”...
Page 157: Ota Upgrade
4. Operation of systems and equipment 4.6.6 OTA upgrade * Bind third-party service Update operation Update now Enter the system upgrade interface by pressing the “System Upgrade” soft key on the smart card on the main interface. Upgrade reminder Available update reminder Click “System Upgrade” to open the system upgrade window;...
Page 158 4. Operation of systems and equipment Upgrade process Once the upgrade process starts, the Upgrade result prompt vehicle will enter a black screen and mute Successful update state, and the vehicle start button, doors, windows and other functions may fail, and will automatically resume after the upgrade is completed.
Page 159 4. Operation of systems and equipment Upgrade failure NOTE ● Please follow the instructions to make upgrade when the engine is shut down and locked, and no person is in the vehicle. ● Please be patient during the upgrade process and do not operate the vehicle before the upgrade is completed.
Page 160: Radio
4. Operation of systems and equipment 4.6.7 Radio Enter the Radio interface in the following ways: C l i c k t h e “ R a d i o ” c a r d i n t h e m a i n interface to enter the radio mode.
Page 161: Local Music
4. Operation of systems and equipment 4.6.8 Local music Enter the local music playback interface in the following ways: C l i c k t h e “ M u s i c ” c a r d i n t h e m a i n interface to enter the local music interface.
Page 162: Bluetooth Function
4. Operation of systems and equipment 4.6.9 Bluetooth function After turning on the Bluetooth function by clicking the “Bluetooth ON/OFF” soft key Enter the Bluetooth mode in the following , the IHU will automatically search for ways: nearby Bluetooth devices. The Bluetooth Click the “Bluetooth phone” soft key in the connection interface displays two display application menu interface to enter the modes: “Radar”...
Page 163 4. Operation of systems and equipment Bluetooth connection failure NOTE Possible cause Action The AVNT unit is taken as an example in the illustration. The operation of the AV unit The device’s Set the device’s is similar. Please refer to the actual vehicle Bluetooth Bluetooth so that it configuration for specific functions and...
Page 164: Models With Av Host)
4. Operation of systems and equipment 4.6.10 System settings (applicable to the vehicle models with AV host) Click “System Settings” in the more menu interface to enter the system settings interface. In the settings interface, click on an option to select it, click on the slider to enable or disable the function, and drag the progress bar for adjustment. Settings group Function Function Options Bluetooth Name Bluetooth switch On/Off Bluetooth...
Page 165 4. Operation of systems and equipment Settings group Function Function Options Safe speed reminder Range: 0~200 Driving tips and memories Current driving mode memory On/Off Speed limit sign identification* On/Off Intelligent speed limit* On/Off Longitudinal vehicle control Forward collision warning* On/Off assist Driving FCW distance* Far/medium/near assistance Active brake assist*...
Page 166 4. Operation of systems and equipment Settings group Function Function Options Exterior Light Intelligent high beam* On/Off Intelligent active lock On/Off Intelligent active unlock On/Off Lock/Unlock Vehicle speed lock On/Off Trunk lid easy open* Off/on/prompt sound on Automatic wiper function* On/Off Auto folding of exterior rearview mirror* On/Off Other accessories Rain-sensitive window closing*...
Page 167 4. Operation of systems and equipment Settings group Function Function Options Intelligent control of recirculation/fresh On/Off air mode Maximum air volume under the On/Off automatic mode Air conditioning setting Sensitivity adjustment of air quality On/Off intelligent control Unlock ventilation On/Off A/C self-drying On/Off Center console display brightness Range: 0~100 Center console A/C interface hold time 5s/10s/15s/30s...
Page 168: System Settings
4. Operation of systems and equipment Settings group Function Function Options Time and date Setting Basic settings 24-hour system Hardware version Software version System information Current language Chinese Supported languages Chinese System Settings Factory reset Reset Manufacturer Model Vehicle Information Hardware version Current language Chinese/English Supported languages Chinese/English...
Page 169: System Setting (Applicable For Avnt Models)
4. Operation of systems and equipment 4.6.11 System setting (applicable for AVNT models) Click the “System Setting” soft button in the application menu interface to enter the system setting interface. In the settings interface, click on an option to select it, click on the slider to enable or disable the function, and drag the progress bar for adjustment. Settings group Function Function Options Bluetooth Name Bluetooth switch On/Off...
Page 170 4. Operation of systems and equipment Settings group Function Function Options Multimedia volume Range: 0~39 Bluetooth phone volume Range: 0~10 Intelligent voice volume Range: 0~10 Navigation broadcast volume Range: 0~10 3D sound effect settings Off/Driver/All occupants Sound effect mode Natural sound/clear voice/super bass/rest System sound effect Sound field * Reset Sound Settings Not sensitive/Weakly sensitive/Generally sensitive/ Speed-sensitive volume control Strongly sensitive Startup volume Adaptive/Invariant...
Page 171 4. Operation of systems and equipment Settings group Function Function Options Safe speed reminder Range: OFF~200 Driving tips and memories Current driving mode memory On/Off On/Off Electronic eye overspeed alarm sound * On/Off Intelligent speed limit* On/Off Longitudinal driving assistance * On/Off Forward collision warning distance setting Far/medium/near Driving assistance...
Page 172 4. Operation of systems and equipment Settings group Function Function Options Exterior Light * Intelligent high beam On/Off Remote unlock All doors/Driver's door only Auto unlock On/Off Vehicle speed lock On/Off Lock/Unlock Intelligent active lock On/Off Intelligent active unlock On/Off Trunk lid easy open* Close/only open/prompt tone Auto folding of exterior rearview mirror* On/Off...
Page 173 4. Operation of systems and equipment Settings group Function Function Options Intelligent control of recirculation/fresh air mode Maximum air volume under the automatic Low/medium/high mode A/C & Seat Unlock ventilation On/Off A/C self-drying On/Off Seat Convenient for driver to enter and exit On/Off Center console display brightness Range: 0~100 Console display A/C interface hold time...
Page 174 4. Operation of systems and equipment Settings group Function Function Options 24-hour system On/Off Basic settings Quick login On/Off Message push On/Off Navigation signal Navigation signal mode GPS/BeiDou/GPS+BeiDou mode System version System update Update Review of version features System information Memory size System Settings Cleanup acceleration Activation Factory reset...
Page 175: Gac Motor T-Box
4. Operation of systems and equipment 4.7 GAC Motor T-BOX* Before using the GAC Motor T-BOX for the The vehicle is running in an area where first time, be sure to read the “T-BOX Service GPS satellite cannot accurately locate the Agreement” and “Privacy Agreement” carefully vehicle and other areas that cannot be 4.7.1 General description...
Page 176: Download App On Mobile Phone
Use the mobile phone to scan the GAC Motor and complete real-name authentication APP QR code to download the APP. to experience the convenient life brought about by the GAC Motor T-BOX.
Page 177: Emergency Rescue
GAC Motor Automatic call after crash: If the vehicle APP or go to a GAC Motor authorized has an accidental collision and the airbag shop. explodes, the GAC Motor T-BOX will start LINK button ①...
Page 178: Feature List
4. Operation of systems and equipment 4.7.4 Feature list You can obtain the GAC Motor services by pressing the in-vehicle emergency call button, or using the mobile APP. Access method Notification method Category Service Description Text Website Website message When the airbag burst, the on-board intelligent sensing...
Page 179 Access method Notification method Category Service Description Text Website Website message You can use the <GAC Motor> APP to query the vehicle Vehicle status in real time, including the door lock status, tire ○ ○ ○ ○ condition query pressure status, etc.
Page 180: Driving Guide
5. Driving guide 5. Driving guide 5.1 Starting and driving 5.1.1 D o o r l a t c h a n d i n s i d e When the gearshift lever is in “P” gear and the NOTE brake pedal is depressed, the backlight color handle of START/STOP button turns green, press...
Page 181: Start The Engine
5. Driving guide 5.1.2 Start the engine Limphome mode CAUTION Enter the vehicle with the intelligent remote control key. ● The engine start time shall not exceed 1 5 s . I f t h e e n g i n e i s n o t s t a r t e d Make sure the gear is in “P”...
Page 182: Shut Down The Engine
5. Driving guide 5.1.3 Shut down the engine WARNING WARNING Park the vehicle steadily and apply the parking brake. ● Do not keep starting the engine for a Emergency shutdown is forbidden long time in a poorly ventilated place during normal driving, as it is likely Shift the gear to “P”. or an enclosed place.
Page 183: Instruction For The Gear
5. Driving guide 5.1.4 Instruction for the gear Push the gearshift lever backwards and WARNING enter the “D” gear from the “R” gear. There will be two resistance points, reach ● When leaving the vehicle, the engine the first resistance point for “N” gear must be turned off, the parking brake position and reach the second resistance must be applied, and the vehicle key point for “D”...
Page 184 “D” and reverse gear “R”. ● When the shift system fails and the “P” gear can not be disengaged, please contact the GAC Motor authorized shop for repair. After the vehicle is completely stopped, press this gear to realize parking. When parking for a long time, depress the brake pedal, switch the gearshift lever to the “N”...
Page 185 5. Driving guide N: Neutral gear D: Forward gear Driving mode Switch this gear during temporary parking. Shift into this gear during normal driving. Gearshift system have ECO (economy), C O M FO RT ( c om f o rt ), S P O RT ( sp o r t s) , When the gear is in the “P”...
Page 186 5. Driving guide ECO mode “DIY” mode Paddle shifter instructions * The instrument displays ECO, indicating The instrument displays DIY, indicating that the vehicle enters the ECO mode. that the vehicle enters the DIY vehicle driving mode adjustable function. The fuel economy of the vehicle is the best in this mode, when the dynamic Users can customize driving mode response of the whole vehicle is gentle.
Page 187: X Driving Mode
5. Driving guide 5.1.5 4 + X driving mode Enter manual mode for a short time only Exhaust sound wave* when the vehicle is in “D” gear. Intelligent air conditioning control Optional driving mode Instrument display atmosphere and theme Instructions for exiting manual mode: Ambient light color and rhythm switch, etc.
Page 188 5. Driving guide Driving mode switching method Switch the central control mode interface NOTE Central control entity dial switching Go to the driving mode application interface through the driving mode card in When the driving mode knob is toggled, the smart card area on the left side of the the driving mode switching interface will AVNT, and click soft button to select the be displayed on the multi-function touch...
Page 189: Sport + (Extreme) Mode Unlocked
5. Driving guide 5.1.6 SPORT + (Extreme) mode Driving mode parameter settings CAUTION unlocked ● The system parameters that can be set After the SPORT + extreme driving mode is in the driving mode setting page are successfully unlocked, you can experience the adjusted according to the configuration SPORT+ driving mode with pure mechanical of the vehicle (such as exhaust sound,...
Page 190 Go to the AVNT and the setting interface can view it in the SPORT + section of the activation code of the vehicle bound to the of driving mode. Before unlocking, the GAC Motor APP. account, and enter it into the activation “SPORT+” soft button is grayed out and After resetting SPORT + unlocking, you code unlocking box of the center console cannot be used.
Page 191 AVN will synchronize the driving score automatically unlock the SPORT + mode. 2. SPORT+Unlock method and honor score in the <GAC Motor> APP to the AVN. When the driving score AV host unlocking method: CAUTION and honor score sum meet the unlocking...
Page 192 5. Driving guide SPORT+ unlock reset Lock SPORT + Second Confirmation CAUTION Lock SPORT+ button ● The user must ensure that the AVNT account remains logged in so that the driving score and driving mileage can be accumulated. All driving score and driving mileage during the exit of the account are not counted.
Page 193: Launch Control
5. Driving guide 5.1.7 Launch control <GAC Motor> APP SPORT + Zone Driving score The SPORT+ mode can be unlocked when the The vehicle starts on a proper high-adhesion driving score meets the conditions. The driving road, and the laubch control can make the score consists of three sub-scores: corner...
Page 194: Exhaust Sound Wave
5. Driving guide 5.1.8 Exhaust sound wave* NOTE WARNING The user can switch the exhaust mode through the interactive interface, and control ● After the ejection mode is activated, ● T h e e j e c t i o n s t a r t i s l i m i t e d t o the opening of the tuning valve according to if the brake pedal is not released for p r o f e s s i o n a l t r a c k s s u c h a s...
Page 195: Brake System
Please the noise will be eliminated, which is a cannot be turned on by the switch. go to the GAC Motor authorized shop for normal phenomenon. Please feel free In SPORT + driving mode of the whole inspection as soon as possible to use it.
Page 196 5. Driving guide Brake booster NOTE NOTE The brake booster is used to increase the pressure applied by the driver on the brake ● Do not rest your foot on the brake ● Under normal driving conditions, brake pedal, and it only works when the engine is pedal during driving, otherwise the linings will wear, and dust will accumulate running.
Page 197 5. Driving guide Braking effect and braking distance WARNING WARNING The braking effect and braking distance mainly depend on the driving environment, road A new tire and brake lining having When the brake is wet or icy or when conditions and driving style, n o t u n d e r g o n e r u n n i n g - i n d o n o t the vehicle is running on a salted road, With worn brake linings, the vehicle cannot have the best adhesion and friction...
Page 198: Epb System (Epb)
● Do not continuously press the brake drive the vehicle to a flat road. Contact pedal to overheat the brakes and the GAC Motor authorized shop for extend the stopping distance. Brake inspection in time. the vehicle intermittently according to road and traffic conditions.
Page 199 5. Driving guide Application of static park brake NOTE WARNING ● The EPB can also be applied when the ● Be sure to apply the EPB during vehicle power switch is set to “OFF” parking. position. ● When the vehicle is running, do not ● After the vehicle is parked steadily, the apply the EPB for speed reduction EPB should be applied first.
Page 200 EPB. If conditions permit, jumper cable => See page 335 emergency start before deactivating the parking brake. Please contact GAC Motor authorized shop for When the vehicle power switch is set to If the service brake fails while the vehicle handling. “ON” position, depress the brake pedal.
Page 201 5. Driving guide AUTO HOLD CAUTION CAUTION On and Off If the following phenomena occur, please ● Do not use dynamic emergency braking operate the EPB again, and if the fault is unless necessary, as it is likely to still not eliminated, please contact GAC cause traffic accidents. Moreover, the Motor authorized shop for maintenance.
Page 202: Electronic Service Brake System
5. Driving guide 5.3 Electronic service brake Activation For the sake of safety, the AUTO HOLD will be disabled and the parking brake will be locked system When this function is enabled, it supports under the following conditions: automatic brake application and release under 1. Turn off the engine.
Page 203 5. Driving guide Traction control system (TCS) After the vehicle is started, if the indicator NOTE lamp is on, it indicates that ESP has been TCS is a subsystem of ESP. TCS determines turned off, and the instrument cluster display whether the driving wheel is slipping according ● W h e n t h e v e h i c l e s p e e d i s g r e a t e r displays alarm information.
Page 204: Esp (Esp) Top Speed Mode
5. Driving guide 5.3.2 ESP (ESP) TOP SPEED 5.3.3 An ti-lo ck b rake syst em When you step on the brake pedal ESP, the system will automatically switch from mode (ABS) the TOP SPEED mode to the dynamic When the power mode selection is TOP Anti-lock brake system (ABS) is a subsystem mode to restore stability control.
Page 205: Hhc (Hhc)
5. Driving guide 5.3.4 HHC (HHC) Anti-lock braking system (ABS) indicator Electronic brake force distribution (EBD) lamp As a part of ABS, the electronic brake force HHC allows the driver to move the foot After the vehicle power supply is switched distribution (EBD) balances the distribution from the brake pedal to the accelerator to the “ON”...
Page 206: Driver Assistance System
5. Driving guide 5.4 Driver assistance system Control buttons NOTE 5.4.1 Cruise control system * ● When you drive off on a steep slope or drive downhill with transmission in “R” The cruise control allows the car to run without position, HHC will automatically apply depressing the accelerator pedal at the set car brake to prevent vehicle from sliding.
Page 207 5. Driving guide Activating cruise control Resuming cruise control NOTE Press the cruise main switch key to When the cruise control is deactivated by depressing the brake pedal or pressing turn on the cruise control system, and the ● The maximum setable cruising speed the button , the indicator lamp on the...
Page 208: Acc
5. Driving guide 5.4.2 ACC * Control buttons NOTE The ACC is referred to as ACC for short, which can automatically adjust the following distance Precautions for use of radars and cameras. with the front vehicle during cruise control, and => See page 242 cruising speed can be 0~130 km/h.
Page 209 5. Driving guide Interface description A yellow light indicates a fault in the Activating ACC ACC and should be serviced by the GAC Press the button, the corresponding Motor authorized shop in time. green indicator lamp in the instrument will ③...
Page 210 5. Driving guide Canceling ACC Resuming ACC Press to exit the ACC in the following way: ACC can be canceled by: The corresponding indicator lamp of instrument cluster is white, the ACC function can be reset: When the brake pedal is depressed (the Opening the driver’s door.
Page 211 5. Driving guide Increasing cruising speed Decreasing cruising speed Controlling ACC distance To increase the vehicle speed, please operate To reduce the vehicle speed, please operate By pressing the key, you can switch the as follows: as follows: gear with the distance from the vehicle in front, and press to switch the first gear once Depress the accelerator pedal, increase P r e s s...
Page 212 5. Driving guide Activating ACC after following stop System limitations When following a vehicle ahead, your vehicle ACC is limited by physical laws and has will also be stopped if the vehicle ahead is certain system limitations. In some driving stopped.
Page 213 5. Driving guide Drive out of the curve. During driving out Narrow vehicles and Z-shaped traffic in When another vehicle changes the lane. of a long curve, as ACC will calculate the front. The sensor can be identified only When a vehicle in an adjacent lane lane in advance, the radar may respond to when the vehicle in front is narrow or the merges into your lane, if the vehicle does...
Page 214 5. Driving guide In low temperature and alpine region, the front windshield is frosted and fogged due to temperature difference or frost, which causes the camera sensor to be blocked. The instrument cluster display will prompt the following text information: “The working conditions of the cruise control system are not satisfied” or “FCM is turned off”.
Page 215 5. Driving guide WARNING WARNING WARNING ● The ACC function cannot cover all ● For the sake of safety, ACC is not ACC will make no or limited response to driving scenarios and traffic, weather allowed to be used in urban driving, the followings: and road conditions. traffic congestion, many bends ● The speed of the vehicle is quite and poor road conditions (such...
Page 216 ACC shall be turned off. ● If the ACC fails to function normally, do not continue to use it. It is recommended to go to the GAC Motor sales outlet for maintenance in time.
Page 217: Traffic Jam Assist (Tja)/ Integrated Cruise Assist (Ica)
5. Driving guide 5.4.3 Traffic Jam Assist (TJA)/ Operation instruction NOTE Integrated cruise assist ICA has a strong correlation with ACC. (ICA)* When learning to use ICA, you shall read ● When ACC is enabled, the ACC status the relevant chapters of ACC at the same displayed on instrument cluster display The integrated cruise assist, referred to as time.
Page 218 5. Driving guide Interface description ⑤ Detected lead vehicle Close all doors properly. ⑥ Lane marking Fasten the seat belt. The lane marking is displayed in gray Set the gearshift lever to D position. when not detected by the system, and Release the brake. white when being detected by the system. The lane marking is displayed in green NOTE when the ICA steering assist control...
Page 219 5. Driving guide ACC and ICA switching Deactivating ICA Interrupting steering assist You can choose to use ACC or ICA. ACC only The ICA can be deactivated (both speed assist The steering assist of ICA can be temporarily helps you control the speed, and ICA helps and steering assist are deactivated) as follows: interrupted through the following operations: you control the speed and steering at the same Step on the brake pedal.
Page 220 5. Driving guide Steering assist Hands-on detection and reminder detecting the torque manually applied to the steering wheel, the hands-on reminder I n I C A m o d e , t h e s t e e r i n g a s s i s t i s disappears.
Page 221 5. Driving guide Limitations Special lane marking colors, like in construction areas. The steering system and brake system Unobvious lane markings, such as too capabilities that can be applied by ICA is thin, worn, blurred or dirt/braking mark/ limited, so ICA cannot maintain a proper snow/water-covered ones.
Page 222 5. Driving guide Driving on steep slopes or inclined or WARNING WARNING curved roads. Bumpy, icy or waterlogged roads. ● The ICA is only a driving assistance ICA has limitations. Example: Severe shaking of the vehicle. function, which can not deal with all ● Inclement weather, lane marking road, traffic and weather conditions.
Page 223: Speed Limit Sign Identification
5. Driving guide 5.4.4 Speed limit sign After this function is turned on, when there is WARNING a speed limit sign on the road, the instrument identification* cluster will display the speed limit sign. When ● The integrated cruise assist cannot Traffic sign recognition is abbreviated to TSR.
Page 224 5. Driving guide Description of display interface The headlamp is not turned on or cannot WARNING fully illuminate the speed limit sign at night or when the light is low in tunnels. ● The TSR function can identify vehicle The speed limit sign is partially or speed-related signs only.
Page 225: Intelligent Speed Limit
5. Driving guide 5.4.5 Intelligent speed limit* ISLACC synchronization of target cruising NOTE speed Intelligent speed limit adaptive cruise control is abbreviated at ISLACC. When there is a speed The system has a button state memory limit sign on the front path, ISLACC sends an function, so that when the vehicle is alert of synchronization with target cruising restarted, the system will work in the state speed through the information of TSR, and before last shutdown.
Page 226: Forward Collision Mitigation (Fcm)
5. Driving guide 5.4.6 Forward collision mitigation Detectable objects: (FCM)* FCW issues an alarm for impending collision to alert the driver by detecting objects ahead The FCM assesses the danger level of pre- according to the signal from the MMW radar collision by detecting the relative distance and installed on the front bumper and the IFC speed with the vehicle ahead in the same path...
Page 227 5. Driving guide Active brake assist When a collision is about to occur, the system will issue an alarm to alert the driver that the vehicle is ready to apply emergency braking according to the signal from the MMW radar installed on the front bumper and the IFC installed on the front windshield, and then will assist in braking and activate the active brake...
Page 228 5. Driving guide On and Off NOTE WARNING ● Access the AV system “System Setup ● The FCM can improve the driving → Driving Assistance → Longitudinal safety, but it is still subject to the Driving Assistance → FCW distance” limitations of laws of physics, and thus shall never be used for risky and set “Far, Medium and Near”.
Page 229 5. Driving guide WARNING WARNING NOTE ● When the FCM is turned on, the The active brake assist function must be ● Pressing the accelerator pedal or turning driver must always keep control of deactivated when the steering wheel will terminate the the vehicle during driving, and take FCW alarm and AEB brake intervention.
Page 230 5. Driving guide System limitations A detectable object ahead is suddenly Pedestrians wear strange clothes or masks, for example, carnival costumes. driven in front of the vehicle. FCM has physical limitations and system There is a bicycle with a special shape External conditions such as sunset, night, limitations.
Page 231: Lka
5. Driving guide 5.4.7 LKA* The vehicle approaches a roadside On and Off telegraph pole, railing, tree, etc. LKA is to reduce accidents due to unintentional The vehicle runs over grass, branches, lane departure. banners and other objects that may come LKA detects lane markings and road edges in contact with it.
Page 232 5. Driving guide Selecting LKA mode How it alerts the driver NOTE When the vehicle power switch is in “ON” The lane departure warning is only activated position and the LDW is turned on, access when “Warning” or “Steering and warning” has The system has a button state memory the AV system “System Settings → Driving been selected as the LKA mode.
Page 233 5. Driving guide Hands-on reminder When the state indicator lamp is green, When the state indicator lamp is green, if there is no action mentioned above, and the the system will not intervene in the steering vehicle deviates from the lane (for example, wheel for corrective steering adjustment if the the vehicle deviates unexpectedly from the vehicle deviates from the lane under one of the...
Page 234 5. Driving guide Other indications Function limitations NOTE When the system detects a camera failure, the Even when the LKA is on and working, due message “IFC sight blocked” will pop up on the to unavoidable environmental factors and The condition that the driver’s hands are instrument cluster.
Page 235 5. Driving guide Unobvious, too thin, worn, blurred or dirt/ U n d e r t h e f o l l o w i n g c o n d i t i o n s , t h e CAUTION snow-covered lane markings. performance of the system may be affected while it intervenes in turning of steering wheel Too wide or narrow lanes.
Page 236 5. Driving guide WARNING WARNING WARNING ● The LKA is only an auxiliary system ● When the LKA gives a warning, do ● The LKA with road edge recognition and cannot actively control the not panic, and do not suddenly turn also uses the signal from the MMW vehicle to change lanes or stay in a the steering wheel to prevent loss of radar sensor.
Page 237: Intelligent High Beam
5. Driving guide 5.4.8 Intelligent high beam* WARNING WARNING The IHC detects traffic and environmental factors in real time through an IFC on the ● The sound inside the vehicle or the IHC is a driver assist function, and it upper edge of the windshield, and can achieve noise outside the vehicle may prevent can help you to select the lighting way...
Page 238 5. Driving guide Activating IHC Turn the lamp switch to AUTO position NOTE to switch on the automatic headlamp function. ● When meeting with non-motor vehicles After the IHC function is turned on, it is in such as bicycles or electric bicycles, this the ready state and the indicator lamp function shall be turned off in time to on the instrument cluster does not light...
Page 239: Bsd System
5. Driving guide 5.4.9 BSD system* The ambient light is brighter than the The vehicle encounters pedestrians and threshold. bicyclists on poorly lit roads or roadsides. The BSD detects the vehicle in the blind spot A street light, a vehicle ahead or an The light of the front oncoming vehicle is and the area behind the blind spot through the oncoming vehicle is detected.
Page 240 5. Driving guide On and Off How it alerts the driver Working conditions During driving (when the vehicle speed is greater than 15 km/h), if the following three conditions occur, the system will give an alarm and the corresponding indicator lamp on rearview mirror will be on: another vehicle enters the blind spot from the rear or from one side.
Page 241 The BSD radar sensors are installed as shown cluster, it indicates that the system is faulty, The false alarm, if triggered, just lasts above. please go to the GAC Motor authorized shop for a short time and can be corrected for inspection in time. automatically. CAUTION...
Page 242: Rear Crossing Traffic Alert System
5. Driving guide 5.4.10 Rear crossing traffic alert The BSD system may not work properly or WARNING even be inoperative under the following special system* conditions: ● BSD is a driver assistance system The detected target is too small, such that cannot replace the driver to as a bicycle, an electric self-balancing monitor external traffic conditions or...
Page 243 5. Driving guide On and Off How it alerts the driver WARNING After the vehicle power switch is in the “ON” gear or the engine is started, access the AV ● RCTA is a driver assistance system system “System Settings → Driving Assistance that cannot replace the driver to → BSD Driving Assistance”, select “RCTA”, monitor external traffic conditions or and press the...
Page 244: Door Opening Warning System
5. Driving guide 5.4.11 D o o r o p e n i n g w a r n i n g Working conditions CAUTION system* The preconditions required for activating the function are as follows: The function cannot detect the objects The vehicle is reversing and the gearshift behind other vehicles or obstacles.
Page 245 5. Driving guide On and Off How it alerts the driver WARNING When the vehicle power switch is in the “ON” gear or the engine is started, access the AV ● DOW is a driver assistance system, system “System Settings → Driving Assistance which cannot replace the driver to → BSD Driving Assistance”, select “DOW”, monitor external traffic conditions or and press the...
Page 246 5. Driving guide Working conditions False alarm The preconditions required for activating the When there is no vehicle in the detection area, function are as follows: the system may issue a false alarm in case of the following conditions: The vehicle is stationary. The vehicle is near a road guardrail.
Page 247: Rear Approach Alert System
5. Driving guide 5.4.12 R e a r a p p r o a c h a l e r t On and Off CAUTION system* When the vehicle power switch is in the “ON” gear, access the AV system “System The rear approach alert function is only Settings → Driving Assistance → BSD Driving for assist and cannot replace the driver Assistance”, select “Rear approach alert...
Page 248: Radar And Camera Sensors
5. Driving guide 5.4.13 Radar and camera sensors * Working conditions False alarm The preconditions required for activating the When there is no vehicle in the detection area, Millimeter-wave (MMW) radar sensor function are as follows: the system may issue a false alarm in case of the following conditions: The MMW radar sensor is installed in the The vehicle is started and the gearshift...
Page 249 MMW radar (ACC/ICA/ calibration, please go to the GAC Motor functions of the radar sensor may not FCM). Therefore, please go to the GAC authorized shop for relevant operation.
Page 250 (in case that the environmental sensor is required, please go to the interruption/performance degradation factors such as lighting are ideal) with a height GAC Motor authorized shop for relevant and even failure of FCM, ACC, ICA, not less than 0.8m. The IFC sensor must be operation.
Page 251 5. Driving guide CAUTION CAUTION ● The field of view of the IFC may be ● If the IFC interference factor disappears, affected by obstructions, such as dust, the pedestrian detection system will sediment, water mist, icing, snow or work again. sludge on the front windshield. In these ● Low light conditions at sunset or night cases, the LKA, FCM, ACC, ICA and may affect the pedestrian detection...
Page 252: Tpms
5. Driving guide 5.4.14 TPMS Alarm description CAUTION When the tire pressure value is higher T h e T P M S m o n i t o r s t h e p r e s s u r e a n d than 330 kPa, the TPMS indicator lamp temperature of the tire, and displays them on If you replace the tire pressure sensor in...
Page 253: On-Board Etc Unit
5. Driving guide 5.4.15 On-board ETC unit* After deactivation, the ETC will turn off the Application and activation 5.8G antenna, and normal automatic charging Users can use the WeChat applet to search The ETC communicates with the RSU in both service will not be available during driving for “Guangdong Access Card ETC” and then directions to achieve toll collection without through the expresway toll station.
Page 254: Cabin Monitoring System
5. Driving guide 5.4.16 Cabin monitoring system* On and Off NOTE The cabin monitoring system monitors the facial features and actions of the driver and ● Please log out your ETC account when passengers in the car through two cameras transferring the ownership of the vehicle. installed in left front of the driver ’s seat ● ETC activation and transaction can be (A-pillar) and the interior rearview mirror done only after the ETC system is on.
Page 255 5. Driving guide Reminder mode If the cabin monitoring system detects sunroof will be closed now.” will appear that the driver is distracted, it will remind (and disappear after 5s), and all anti-pinch Fatigue reminder the driver by voice sounding “Dear, please windows and sunroof will be closed. The cabin monitoring system can detect pay attention”.
Page 256 Wave the palm from right to left, so Photos can be downloaded and shared later through the OTA upgrade) the music will automatically skip to the through the <GAC Motor> APP. previous track. When the driver and passengers wake up Working conditions the voice assistant and inform that music is...
Page 257 5. Driving guide False alarm NOTE NOTE Conditions where false alarms may occur: The vehicle is in a curve; The driver is ● When the cabin monitoring system The system will automatically return to in the process of steering; The vehicle detects the face or behavior of the driver normal if any of the following conditions is enters and exits a tunnel;...
Page 258 The and some drivers’ facial features may recommended to go to the GAC Motor behavior described above may damage not be accurately captured. authorized shop for overhaul in time.
Page 259: Pas
5. Driving guide 5.5 PAS For models with front radar: Dynamic view (for model with rear radar) When the vehicle power switch is in the 5.5.1 “ON” gear, release the parking brake and set the gearshift lever to the “R” gear. The RPA uses the radar sensors to send and When the vehicle speed is less than 10 receive the ultrasonic waves reflected by the...
Page 260 5. Driving guide Dynamic view (for models with front and CAUTION rear radars) In certain environments, such as during pneumatic braking of large trucks, buses and other large vehicles around, the front radar sensor is affected by other electrical equipment or devices that can produce ultrasonic waves of the same frequency, which may cause false warning or failure within 0.5~1 s.
Page 261 5. Driving guide Distance audible alarm Distance to detected obstacle The audible alarm changes with reference to the distance between a detected obstacle and Audible alarm the front/rear bumper. In addition, the color level message Left/right front Rear right Rear middle Front left sensor Rear left sensor of activated sector shown on the AV system...
Page 262 5. Driving guide Layout of front radar sensor Layout of rear radar sensor The front ultrasonic radar sensors are installed on the front bumper cover. (for models with The front ultrasonic radar sensors are installed The rear ultrasonic radar sensors are installed vertical grille*) on the front bumper cover. (for models with on the rear bumper cover. (for models with transverse grille*) transverse grille*)
Page 263 5. Driving guide CAUTION WARNING ● Always keep the surface of the RPA ● T h e R PA c a n n o t t a k e t h e p l a c e sensors clean and never cover a RPA of the driver’s observation to the sensor.
Page 264: Reverse Image System
5. Driving guide 5.5.2 Reverse image system * Dynamic trajectory WARNING The reverse image system can cover the video at a wide angle up to 130° and display ● When a high-pressure cleaner is used, a wide-range image behind the vehicle on the clean the RPA sensors in snatches AV system display to allow the driver to know gently, with the nozzle at least 30cm various complex road conditions behind the...
Page 265 5. Driving guide CAUTION ● Rear camera surfaces shall be kept clean at all times. Clean the surface of the CCD with a piece of soft damp cloth to avoid scratching. ● Do not use a high-pressure cleaner to clean the CCD for a long time, and if it to be used, please keep the nozzle at least 30 cm away from the CCD.
Page 266: Around View Monitor (Avm)
5. Driving guide 5.5.3 Around View Monitor NOTE (AVM)* ● When the system is activated, the AV The AVM system collects the left, right, front, system display will show the image rear images of the vehicle and integrate them around the vehicle and the reversing into a 360°...
Page 267 5. Driving guide Interface description ① Exit button ② Current perspective ③ Integrated view section ④ Text prompt pop-up window ⑤ Dynamic trajectory ⑥ Single view section ⑦ Setting button ⑧ 2D/3D view switching button ⑨ Radar audible alarm switch...
Page 268 5. Driving guide 2D view interface: When the front/rear/left/right area in the integrated view section ③ is clicked, the single view section ⑥ displays the front/ rear/left/right single view of the vehicle accordingly. Click the 3D button to switch to panoramic view + 3D simulation mode. NOTE ● The description of the display interface is for reference only.
Page 269 5. Driving guide AVM settings Press the Setting button ⑦ to enter the AVM settings screen, where you can set the following options. Trajectory switch: When it is turned on, the display interface will show the dynamic trajectory that rotates with the steering wheel.
Page 270 5. Driving guide Layout of cameras The left/right cameras are respectively installed CCD is installed next to the license plate lamp. at the bottom of the left/right exterior rearview The front camera is installed under the front mirror. CAUTION logo. ● Please keep the camera surface clean. ● Do not clean the camera with a high- pressure cleaner for a long time, and keep a distance of at least 30 cm from the camera during cleaning Keep at least 30cm away from the camera.
Page 271 5. Driving guide The system is integrated with DVR, and after a TF card is inserted, the video recording, video & photo album, and setting functions of DVR can be operated. The DVR collects and processes the video taken in the front, rear, left and right sides of the vehicle, and displays and plays the video on the AV system display;...
Page 272 5. Driving guide Photographing Installation location of DVR TF card CAUTION Photographing: Click soft button ① to record the current around view and save it ● T h e v i d e o b e i n g r e c o r d e d i s n o t to TF card.
Page 273: Electric Power Steering (Eps)
Method 2: stability, and improving driving comfort and again while driving, stop driving, and contact vehicle safety. The turning effort of the steering wheel is the GAC Motor authorized shop for inspection. set automatically by switching the driving CAUTION mode (refer to chapter “4+X Driving Mode” => See page 181).
Page 274: Driving Skills
5. Driving guide 5.7 Driving skills 5.7.2 Driving in running-in period Inspections after starting/during driving Check whether the instrument cluster In order to ensure the service life of the 5.7.1 Traffic safety inspection works properly; check whether any vehicle, the vehicle shall be run-in before being indicator lamp comes on or any alarm put into normal use.
Page 275 5. Driving guide Engine running-in Running-in of tire and brake lining WARNING The mileage in the running-in period of a new Within the first 500km of driving, drive the engine shall be 1500km. Do not perform the vehicle at a moderate speed to get the new ● If the brake is damp, frozen or the following operations within the first 1000km of tires run in fully.
Page 276: Driving Essentials
5. Driving guide 5.7.3 Driving essentials Precautions while driving over a water- NOTE logged road section: Precautions under various road conditions: Before driving over a water-logged road The brake linings and brake discs are section, check the depth of water, which When the vehicle is driving on a road with soaked in water while the vehicle is shall not be higher than the lower edge of...
Page 277 5. Driving guide Driving essentials in winter 4. Use washer fluids containing antifreeze: 7. In cold winter (especially in northern C h i n a ) , a v o i d s t a r t i n g t h e e n g i n e These products are available at GAC Check if the coolant is in good condition frequently and shutting down the engine...
Page 278: Efficient Use Of Vehicle
5. Driving guide 5.7.4 Efficient use of vehicle 5.7.5 Fire prevention When the vehicle is running, do not step on the brake pedal, as it will cause Before driving, make sure that the parking In order to prevent vehicle fires, pay attention premature wear, overheating of the brake brake is completely released and the to the followings during use: pad and wast of fuel.
Page 279 5. Driving guide It is recommended to regularly drive Precautions for driving: to the GAC Motor authorized shop for During driving and parking, especially inspections: in summer, be sure to check if there are Also subject all electric lines of the flammables such as hay, dry branches, vehicle to regular inspections. Specifically...
Page 280: Operation And Maintenance
6. Operation and maintenance 6. Operation and maintenance 6.1 Maintenance instructions 6.2 Internal maintenance Potential hazards of the vehicle Carbon monoxide: Carbon monoxide in Safety precautions Cleaning and maintenance of instruments the exhaust gas emitted by the engine is a toxic gas. Be sure to start the engine in and plastic parts To avoid potential hazards, please read this a well-ventilated place.
Page 281 6. Operation and maintenance Cleaning and maintenance of carpet Cleaning and maintenance of leather* Cleaning and maintenance of seat belts Vacuum the dust on the carpet frequently. Vacuum the dust. Pull the seat belt out slowly and keep it being extracted. Scrub the carpet regularly with detergent to Clean the leather with a clean soft cloth keep it clean.
Page 282: External Maintenance
If the the filters at the GAC Motor authorized shop ● For the overhaul of an accident vehicle is left in the sun for a long time, wait...
Page 283 If any, assist camera with a high-pressure agent, the filtering state of the clean water, drive to the GAC Motor authorized shop for cleaner for a long time; when washing the and the type of wax solvent that do not touch-up.
Page 284 6. Operation and maintenance Waxing Cleaning and maintenance of external Remove accumulated ice using de-icer plastic parts spray. Ice removal shovel can also be used, Regular waxing can protect the paint surface but special care should be taken to avoid of the vehicle body and keep the vehicle body External plastic parts are generally washed damaging parts, and ice must be scraped in...
Page 285 6. Operation and maintenance Cleaning of wiper blades Maintenance of sealing strips CAUTION Lift the wiper arm and carefully wipe off Frequent and proper protection of the rubber the dust and dirt from the wiper blade with sealing strips of the doors, windows and other ● It is prohibited to maintain the wheel a soft cloth.
Page 286: Paintwork
If the dirt cannot be cleaned with water, clean it as If you have any questions, please call the follows: GAC Motor authorized shop. Water marks, etc.: Clean with weak acid (citric acid). Bird droppings, insects, oil stains: Clean...
Page 287: Inspecting And Adding Fluids
6. Operation and maintenance 6.4 Inspecting and adding Adding fuel fluids 6.4.1 Fuel As the amount of fuel decreases when the vehicle is running, the fuel gauge scale will gradually decrease. => See page 46 When the fuel level is too low, the yellow indicator lamp flashes, and the instrument cluster will give an alarm message.
Page 288 6. Operation and maintenance NOTE CAUTION T h i s m o d e l c o m p l i e s w i t h C h i n a V I Low-grade fuel or substandard fuel may emission standards.
Page 289: Engine Oil
6. Operation and maintenance 6.4.2 Engine oil Emergency unlocking WARNING Function of engine oil Always use the engine oil approved by Engine oil has functions such as lubrication, our company. Otherwise, the ensuing sealing, cooling, anti-rusting and cleaning. engine damage will not be covered by the warranty.
Page 290 If the engine oil level is normal, but the warning lamp is still on after the engine is started, do WARNING not continue to start the engine. In this case, contact the GAC Motor authorized shop timely ● Be extremely careful while working in for inspection. the engine compartment.
Page 291 ● If too much oil is added, do not start the engine. In this case, please contact the GAC Motor authorized shop as soon as possible. Otherwise, the three-way catalytic converter may be damaged.
Page 292: Coolant
In this case, ● The engine compartment is a high- NOTE contact the GAC Motor authorized shop timely risk area. Be sure to read and follow for overhaul. the relevant warning instructions ● Coolant specifications: DF-6, -35 °C.
Page 293 6. Operation and maintenance Engine coolant Intercooler coolant Adding coolant Check whether the coolant level in the Check whether the coolant level in the After checking the coolant level, if required, expansion tank is between the maximum scale intercooler coolant expansion tank is between add coolant following the steps below: mark “MAX”...
Page 294: Windshield Washer Fluid And Wiper Blades
● Coolant can only be added after the to the GAC Motor authorized shop in engine or the intercooler has cooled time to clean the cooling system and add new coolant.
Page 295 6. Operation and maintenance Replacing front windshield wiper blades WARNING ● Be extremely careful while working in the engine compartment. Before operation, be sure to carefully read and follow the relevant warning instructions. ● Do not misuse coolant or any other additives as windshield washer fluid.
Page 296: Brake Fluid
● The brake fluid packaging container windshield instantly. Therefore, be sure to go to the GAC Motor is marked with its specifications. In authorized shop to check the brake fluid level ● The status of the wiper blades must...
Page 297 In this case, do not continue driving. Please contact WARNING GAC Motor authorized shop for maintenance in time. When the engine cools down, check whether ● B r a k e f l u i d i s t o x i c . I t m u s t b e...
Page 298: Battery
In this case, operation! please go to the GAC Motor authorized shop for inspection in time. Open flames, sparks, uncovered lamps and smoking are prohibited...
Page 299: A/C Filter
While leaving the vehicle, make sure that ● If the battery needs to be replaced, the doors are closed and all electrical please go to the GAC Motor authorized NOTE consumers (e.g., lamps) are turned off. shop for replacement; If the wrong type of battery is used, the vehicle may not...
Page 300 6. Operation and maintenance Removing and installing A/C filter Disconnect the glove box from the damper Press the filter element cover buckle as in the direction of arrow A. arrowed and take out the filter element Open the glove box. cover ① . Press the glove box in the direction of 2. S c r e w o u t t h e f i x i n g s c r e w p i n ①...
Page 301: Replacing Bulbs
The working state of the lamp must be decreased air volume of A/C or even checked after the bulb is replaced. Please go blockage. to the GAC Motor authorized shop in time to check the beam state of the lamp. When installing the A/C filter, install it according to the A/C filter down mark.
Page 302 6. Operation and maintenance Preparation for replacing bulbs Removing the rear combination lamp A CAUTION If it is found that any bulb is damaged, replace the bulb as soon as possible. Before The damaged bulb must be replaced with replacement, make the following preparations: a new bulb of the same specification. The 1. Turn off all lamps.
Page 303 6. Operation and maintenance Replacing rear turn signal lamp bulb Disconnect plug ① of rear combination R e m o v e r e a r c o m b i n a t i o n l a m p A lamp A.
Page 304: Wheels
Pry off the fixing plastic nail as arrowed, Replace the original bulb with a new ● In case of uneven and excessive tire and lift off the trunk lid trim. reverse lamp bulb in the reverse order. wear, please go to the GAC Motor authorized shop for inspection and repair in time.
Page 305 6. Operation and maintenance Precautions for wheel failure WARNING WARNING When driving over curbs or similar obstacles, keep a slow speed in the If tires burst or leak when the vehicle is ● Never use old wheels and tires vertical direction of the obstacles as much running, it is very easy to cause serious o f u n k n o w n o r i g i n u n d e r a n y as possible.
Page 306 After emergency use of spare tire, please go Replace at least two tires on the same to the GAC motor authorized shop or wheel Winter tires axle at the same time, rather than only repair shop for full-size tire replacement in Winter tires still have good grip performance one tire individually.
Page 307 6. Operation and maintenance Please note that the tread of winter tires Inspecting tire pressure WARNING shall have patterns deep enough (tread depth not less than 4 mm; otherwise, the ● After using winter tires, there may applicability in winter will be limited). be decreased driving traction on After installation of tires, check the tire dry roads, increased road noise inflation pressure.
Page 308 6. Operation and maintenance For inspection of tire pressure, the Service life of tires WARNING tire must be in a cold state. When the temperature increases, the tire pressure ● Abnormal tire pressure may cause can be slightly higher than the specified tire burst, resulting in a traffic value, and it is not necessary to reduce accident, injury or even death.
Page 309: Tire Chain
If uneven and excessive wear of the dangerous. as shown, the tire can no longer be used safely tires is found, please go to the GAC Motor and must be replaced immediately. During deceleration, make full use of authorized shop to check the wheel alignment the engine braking function.
Page 310 6. Operation and maintenance NOTE CAUTION Var i o u s co u nt ri e s a n d re gi ons ha v e ● If tire chains are installed on the tires, different regulations on tire chains. Before the size and type of tire chains shall be assembling tire chains, please refer to the consistent with those of the standard laws and regulations of the corresponding...
Page 311: Technical Data
7. Technical data 7. Technical data 7.1 Identifications The locations of the vehicle identification number (VIN) is shown in the figure: ① VIN: Located on the engine compartment partition. ② VIN: Located on the left side of the instrument panel. NOTE The position indication and quantity of vehicle identification number (VIN) are not complete.
Page 312 7. Technical data OBD DLC Vehicle nameplate Engine model and factory number Manufactured by GAC Motor Co., Ltd. Vehicle model: *LMGXXXXXXXXXXX* XXXXXXXXXX Gross vehicle weight rating: XXX brand XXXXkg Seating capacity: XX Engine displacement: XXXmL persons Manufacture date: XXXX - Engine model: XXXXXX...
Page 313: Dimensions & Parameters Of Vehicle
7. Technical data 7.2 Dimensions & parameters of vehicle Dimensions Parameters Item Numerical Unit value Overall length 4700±47 Overall width 1850±18 Overall height 1432±14 Wheelbase 2736±27 Front wheel 1589±15 Wheel track Rear wheel 1583±15 Front overhang 923±9 Rear overhang 1041±10 Minimum ground ≥112 clearance (full load)
Page 314: Vehicle Mass, Engine And Fluid Parameters
7. Technical data 7.3 Vehicle mass, engine and fluid parameters Mass Kerb mass of vehicle (kg) Gross vehicle weight rating (kg) Model Gross vehicle Kerb mass (kg) Front axle load Rear axle load Front axle load Rear axle load weight rating 1345±40 831±24 514±15 GAC7153BCW6A 855±25 545±16 1790 1400±42 845±25 555±16 Comprehensive parameters Item Performance parameters Unit Seating capacity Person...
Page 315 7. Technical data Parameters of engine Model 4A15J2 Gasoline engine, spark-ignition, in-line, 4-cylinder, 4-stroke, liquid- Type cooled, GDI, DOHC, exhaust gas turbocharging Number of cylinders Ignition order 1–3–4–2 Bore (mm) Travel (mm) Displacement (mL) 1497 Compression ratio (11.5±0.3):1 Rated power/speed (kW (r/min)) 130/5500 Maximum net power/speed (kW (r/min)) 125/5500 Maximum torque/speed (Nm/(r/min)) 270/1400~4500 Maximum net torque/speed (N m/(r/min)) 250/1400~4500...
Page 316 7. Technical data Specifications and capacity of fuel/oil/fluid Item Specification Capacity #92 high-quality unleaded gasoline Fuel Total (China VI) and superior grade Engine coolant DF-6, -35 ℃ Total 7.2L DF-6, -35 ℃ Intercooler coolant Total 3.0L Total 4.5L Oil grade: SN/ILSAC GF-5 Engine oil: Oil viscosity: SAE 0W-20 Replace 4.2L WDCT fluid Shell Spirax S5 DCT 12 Total Brake fluid DOT4 Total 0.8L...
Page 317: Parameters Of Transmission, Chassis And Lamps
7. Technical data 7.4 Parameters of transmission, chassis and Wheels lamps 6J×16*, 7J×16*, 6.5J×17*, 7.5J×17*, 7J×18*, Specifications of rim 8J×18* Transmission parameters Tire specification 215/60R16*, 225/50R17*, 225/45R18* Model 7WF25* Front wheel Rear wheel Type 7WDCT Tire pressure 220 kPa 220 kPa 4.050 (1st, 2nd, 4th, 2.531 (3rd, 6th, 7th Final ratio 230 kPa 230 kPa 5th, R gears) gears) Installing spare tire...
Page 318 7. Technical data Suspension Dynamic balance of wheels Residue dynamic Designation Front suspension Rear suspension unbalance Type McPherson, independent Multi-link, independent Inner side ≤ 8g Front wheel Outer side ≤ 8g Steering gear Inner side ≤ 8g Rear wheel Type Rack-and-pinion Outer side ≤ 8g Power steering type Electric power steering...
Page 319 7. Technical data Wheel alignment Lamps Designation Parameters Lamps Model Power Individual toe-in 5′±3′ High beam Wheel camber -20′±30′ Low beam Front Front wheel Kingpin caster angle 7°12′±45′ combination Daytime running lamp* lamp Kingpin inclination Front position lamp 13°49′±45′ angle Front turn signal lamp* Individual toe-in 5′±3′...
Page 320 7. Technical data Lamps Model Power Trunk lamp Instrument panel left ambient light Instrument panel right ambient light Driver’s and front passenger’s footwell lamps Ambient light * Console ambient light Driver’s door ambient light Front passenger’s door ambient light Instrument panel middle ambient light Sun visor vanity mirror lamp* If the bulb needs to be replaced...
Page 321: Accident Handling
8. Accident handling 8. Accident handling 8.1 Driver’s tools, spare tire * Spare tire* NOTE Driver’s tools ● The spare tire has been inflated Check its pressure regularly to ensure that it is at the specified maximum tire pressure, and perform multiple inspections every year. ● When using the spare tire, the replaced full-size tire can be temporarily fixed at the place where the spare tire is mounted.
Page 322: Use Of Warning Triangle
8. Accident handling 8.2 Use of warning triangle Placement distance WARNING Ordinary highway ● It is forbidden to use the spare tire Expressway that has been damaged or worn to Daytime Night the limit. ≥50m ≥80m ≥150m ● The storage and service life of spare tires is 6 years. It is prohibited to use CAUTION them beyond the time limit.
Page 323: Use Of Reflective Vest
8. Accident handling 8.3 Use of reflective vest 8.4 I n f l a t o r p u m p a n d t i r e NOTE sealer * ● When handling vehicle accidents, no Inflator pump and tire sealer are used to rectify matter what kind of lighting conditions, the faults such as tire leakage or low tire it is necessary to wear a reflective vest pressure caused by a nail in a tire.
Page 324 8. Accident handling Inflator pump Operate as follows while inflating a tire: Screw the fitting of the inflator pump into Open the trim cover of 12V power supply, the tire valve, during which a slight air insert the power connector into the on- leak will be heard and it indicates that the board 12V power supply, and start the Take out the automatic inflator pump from air passage between the pump and tire vehicle.
Page 325 8. Accident handling Tire sealer CAUTION The tire sealer should be used as follows: ● The tire sealer bottle shall not be placed upside down. ● T h e t i r e s e a l e r i s n o t e d i b l e , s o i nhal at i on or s w al l ow i ng s h a l l b e avoided.
Page 326 8. Accident handling Remove the tire valve cap. Open the trim cover of 12V power supply, Press the power switch button so that insert the power connector into the on- the sealer is injected into the tire. The air Screw the water hose connector onto the board 12V power supply, and start the pressure is relatively high and between 2.8 tire valve.
Page 327 Park the vehicle in a safe place, and connect the inflator tube to the tire again. Observe the air pressure value and do inflation if there is a significant drop. If the tire pressure is lower than 1.3 bar, the tire cannot be repaired. You should go to the GAC Motor authorized shop for overhaul as soon as possible.
Page 328: Replacing Flat Tire
8. Accident handling 8.5 Replacing flat tire* Lifting the vehicle Preparations Apply parking brake Set the gearshift lever to “P” gear. The vehicle power switch is set to the “OFF” gear and the hazard warning lamp is turned on. Place a warning triangle in a suitable position behind the vehicle. Find a suitable object to wedge the wheel in the diagonal position of the one to be replaced to prevent the vehicle from...
Page 329 8. Accident handling WARNING WARNING Improper use of jacks will cause serious ● The jack supplied with the vehicle injury. can only be used to lift the vehicle, and cannot be used to lift other heavy ● The jack must be used on a hard and objects or vehicles. flat ground or a hard pad (not thicker than 1 cm) may be placed under the ● When the jack is in use, do not start...
Page 330 8. Accident handling Installing spare tire In order to avoid the noise of the vehicle WARNING during driving later on, please remember the locations of various tools, put them ● Threads on wheel bolts and hubs back in place after use and fix them. must be kept clean so that the bolts can be easily screwed and free of CAUTION adhesions such as grease.
Page 331: Microwave Window
8. Accident handling 8.6 Microwave window 8.7 Fuse Engine compartment power distribution unit (PDU) Instrument panel PDU The microwave window is set on the right Opening of engine hood of the front windshield corresponding to Press the fixing clip in the direction of Remove the left lower guard panel (dotted the interior rearview mirror.
Page 332 ● For fuse replacement, please consult the GAC Motor authorized shop. Remove or install the fuse using the fuse If the fuse is blown, it is recommended to puller in the engine compartment PDU. replace it in the GAC Motor authorized shop.
Page 333 8. Accident handling WARNING ● Fuses may not be reused. ● Do not use the fuse with a rated current value that is higher than the specified value; otherwise other components of the electrical system will be damaged. ● The use of unsuitable or patched fuses can cause a short circuit or even a fire.
Page 334: Fuses In Instrument Panel Pdu
8. Accident handling 8.7.1 Fuses in instrument panel PDU The picture is not guaranteed to be suitable for all vehicle models. Fuses for different vehicle models differ slightly with each other. Please refer to the actual vehicle.
Page 335 8. Accident handling Rated value Feature/component Rated value Feature/component IF01 20 A Front 12V power outlet IF19 7.5A GWM/BCM IF02 7.5A IF20 — — IF03 7.5A ACU/DSM ECU * IF21 7.5A Brake switch/ESPI USB charging port */Mobile phone WCM */DVR IF22 7.5A EPS ECU/GSM IF04 7.5A USB port *...
Page 336 8. Accident handling Rated Rated Feature/component Feature/component value value IF35 7.5A IF51 Left front seat connector A (seat controller power supply) * IF36 BCM (turn signal lamp power supply) IF52 Right front seat connector A (seat adjusting switch IF37 — — power supply) * IF38 — — IF53 BCM (windshield washer motor power supply) Instrument cluster*/instrument cluster display IF39 7.5A IF54...
Page 337: Fuses In Engine Compartment Pdu
8. Accident handling 8.7.2 Fuses in engine compartment PDU The picture is not guaranteed to be suitable for all vehicle models. Fuses for different vehicle models differ slightly with each other. Please refer to the actual vehicle.
Page 338 8. Accident handling Rated Rated Feature/component Feature/component value value EF01 — — EF21 — — EF02 — — EF22 To instrument panel PDU EF03 — — EF23 ESPI EF04 7.5A EF24 IG1 On EF05 — — EF25 Starter EF06 — —...
Page 339 8. Accident handling Rated Rated Feature/component Feature/component value value Upstream oxygen sensor/Downstream ER04 — Compressor relay EF38 oxygen sensor/Compressor relay (ER04) ER05 — Blower relay PCV heater relay (ER10)/PCV heater/ ER06 — Low speed fan relay Canister vent valve/ Relief valve/Canister ER07 — Defogger relay EF39 solenoid valve/Oil pump solenoid valve/Oil...
Page 340: Fuse In Pfb
8. Accident handling 8.7.3 Fuse in PFB The picture is not guaranteed to be suitable for all vehicle models. Fuses for different vehicle models differ slightly with each other. Please refer to the actual vehicle. Rated Feature/component value PF01 300A S t a r t e r / E n g i n e c o m p a r t m e n t P D U / Alternator PF02...
Page 341: Emergency Start
8. Accident handling 8.8 Emergency start While connecting the batteries of two vehicles, Connect end ③ of the black cable to be sure to first connect the positive terminal the negative pole (-) of the power battery “B”, and connect end ④ to the engine and then the negative terminal. Jumper cable block or a metal part firmly connected to If the engine cannot start because the battery...
Page 342 8. Accident handling WARNING WARNING WARNING ● Be sure to turn off the headlamps Improper use of jumper cables may The jumper cable should be properly before removing the jumper cables. cause battery explosion and serious connected to the positive and negative injury.
Page 343: Vehicle Towing
If the vehicle needs to be towed, it shall be towed by the GAC Motor authorized shop or a professional towing company. It is recommended to use a rollback tow truck for towing. If the conditions can not be met, a wheel-lift truck can also be used for towing the vehicle as appropriate.
Page 344 8. Accident handling Emergency towing Installing a towing hook Front Rear If it is impossible to find a tow truck in an For models with front transverse grille * emergency, fasten the towing cable or towing chain in the emergency towing ring Front Rear to temporarily tow the vehicle.
Page 345 8. Accident handling For models with front vertical grille * Precautions for towing Front Rear Before emergency towing, be sure to follow the Front Rear instructions below: Hazard warning lamps of both towing and towed vehicles must be turned on, and local traffic regulations must be complied with.
Page 346: Getting Out Of A Trap
8. Accident handling 8.10 Getting out of a trap During the emergency towing, be sure to follow the instructions below: If the vehicle is stuck on a soft road such as Start the engine and drive at a slow sandy, muddy or snowy road, follow the steps speed till the towing rope is tight and then below to get out of a trap: accelerate the vehicle slowly.
Page 347 9. Environmental protection information 9. Environmental protection information 9.1 Environmental protection information code Type Environmental protection information code 000001 000002 GAC7153BCW6A CN QQ G6 Z2 0B82000076 000003 000004...
Page 348 9. Environmental protection information 9.2 Environmental protection information Type Environmental protection information GAC7153BCW6A Engine model/manufacture 4A15J2/Guangzhou Qisheng Powertrain Co., Ltd. Upstream: 02515700/Upstream: Sanshui Branch of Faurecia (Guangzhou) Automotive Systems Co., Ltd. Catalytic converter model/manufacturer Downstream: 02915700/Downstream: Sanshui Branch of Faurecia (Guangzhou) Automotive Systems Co., Ltd. Coating: Upstream: Unit 1: Wuxi Weifu Environmental Catalysts Co., Ltd; Downstream: Unit 1: Wuxi Weifu Environmental Catalysts Co., Ltd.
Page 349 9. Environmental protection information Type Environmental protection information GAC7153BCW6A Engine model/manufacture 4A15J2/Guangzhou Qisheng Powertrain Co., Ltd. Upstream: 02515700/Upstream: Sanshui Branch of Faurecia (Guangzhou) Automotive Systems Co., Ltd. Catalytic converter model/manufacturer Downstream: 02915700/Downstream: Sanshui Branch of Faurecia (Guangzhou) Automotive Systems Co., Ltd. Coating: Upstream: Unit 1: Wuxi Weifu Environmental Catalysts Co., Ltd; Downstream: Unit 1: Wuxi Weifu Environmental Catalysts Co., Ltd. Front: Unit 1: NGK AUTOMOTIVE CERAMICS (Suzhou); Downstream: Unit 1: Corning Painting/carrier/packaging manufacturer (Shanghai) Co., Ltd.
Page 350 9. Environmental protection information...
Page 351 Index Brake system .............189 BSD system* .............233 A/C air outlet ..............136 ACC *................Cab .................. Accessories and modification ........126 A/C filter ..............293 Cabin monitoring system*..........248 Anti-lock brake system (ABS) ........198 Cases where the airbags may deploy ......23 APP on mobile phone ..........170 Cases where the airbags might not deploy ....24 Around View Monitor (AVM)* ........260 Child restraint ..............25 AV system ..............137...
Page 352 Index Door latch and inside handle ........174 Emergency towing .............338 Door lock system ............77 Engine oil ..............283 Door opening warning system*........238 Environmental protection information ......342 Download, installation and use instructions of Bluetooth Environmental protection information code ....341 key ................63 EPB system (EPB) ............192 Driver assistance system...........200 ESP (ESP) ..............196 Driver’s tools, spare tire ..........315...
Page 353 Instruction for the gear..........177 Fuses in instrument panel PDU .........328 Instrument cluster ............38 Intelligent high beam* ..........231 Intelligent speed limit*..........219 GAC Motor T-BOX* ...........169 Interior ................7 General description ....... 11, 25, 128, 169 Interior lamps .............100 Getting out of a trap ...........340 Internal maintenance ..........274...
Page 354 Index Mobile phone wireless charging system* ....121 Remote control key............59 Replacing bulbs ............295 Replacing flat tire ............322 Parameters of transmission, chassis and lamps ..311 Reverse image system *..........258 PAS ................253 RPA ................253 Personal account ............148 power outlet ............... 119 Power sunroof .............89 Safe driving..............
Page 355 Index Supplemental restraint system (SRS) ......18 Vehicle mass, engine and fluid parameters ....308 System setting ............163 Vehicle towing............337 System settings ............158 Wheels...............298 Tire chain ..............303 Why must you fasten the seat belt ......13 TPMS .................246 Windshield ..............105 Traffic Jam Assist (TJA)/ Integrated cruise assist (ICA)* . Windshield washer fluid and wiper blades....288 Wiper combination switch ..........103 Traffic safety inspection ..........268 Trunk .................124 Trunk lid ...............83 Use of reflective vest ..........317 Use of warning triangle ..........316 Vehicle locking and unlocking........59...
Page 356 Index...

GAC MOTOR EMPOW Manual

Quick Links

Related Manuals for GAC MOTOR EMPOW

Summary of Contents for GAC MOTOR EMPOW

Table of Contents