WATERLOO Hyper Tough PROJECT CENTER Operator's Manual

OPERATOR'S MANUAL
PROJECT CENTER
SERVICE PARTS
CALL 1-800-833-4405 FOR SERVICE PARTS. Call your local dis-
tributor outside of United States. Refer to Service Parts Drawing
for full listing of Service Parts. Please have model number ready
at time of call.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
CAPACITIES
• The maximum weight for each drawer should be no more than
30 lbs.
• The maximum product weight, including contents, should be no
more than 300 lbs.
MAINTENANCE
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
Waterloo Industries, 1500 Waterloo Dr., Sedalia, MO 65301
Ball bearing slides
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax as
to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• It is recommended that drawer liners be used to protect the fin-
ish inside the drawers and to make the drawers easier to clean.
The drawer liners may be cleaned with soap and water.
DANGER is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before assembly and first use of this product.
DANGER
• DO NOT stand on this product. You may fall or cause product
to tip.
• DO NOT open more than one drawer. The product may be-
come unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other mov-
ing object.
• DO NOT move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• DO NOT place any objects on top of a closed lid.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving. Pushing the unit will
prevent serious ankle and foot injuries.
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing drawers, the cover or doors.
Remove hands before the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• DO NOT exceed the maximum weight capacity for each
drawer or shelf.
• This product should be empty when transporting by vehicle.
Properly secure when transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
• As with all metal products, this product can contain burrs and
sharp edges. Wear protective gloves.
• Use adequate manpower when assembling and moving this
unit. Failure to do so may cause personal injury or product
damage.
SAFETY
F2067 REV A