Canyon MW-9 - Dual Mode Wireless Mouse Manual

Canyon MW-9 - Dual Mode Wireless Mouse Manual

Advertisement

Canyon MW-9 - Dual Mode Wireless Mouse Manual

Features

2 connection modes: wireless USB 2.4 GHz and Bluetooth 3.0;
Technology: Optical;
Number of buttons: 6;
Resolution: 800/1000/ 1200/1500 DPI;
1 AA battery included
The buttons are equipped with silent switches

Package contents

Package Contents

Wireless optical mouse
USB receiver
User manual
Battery 1 pcs, AA type

Disposal

The used electronic devices, batteries and packaging materials are sent to recycling facilities where they are processed.

Wireless Mode Switching

There are two modes for the mouse - Bluetooth and 2.4 GHz Wireless - which can be switched as follows:

Bluetooth mode

Bluetooth Mode Connection

  1. Press the Power switch to "ON"
  2. Briefly press the mode button until the green light is on
  3. Hold and press the mode button for 3 seconds, Green light will flash, indicating that the mouse is ready for pairing.
  4. On your PC, open the Bluetooth connection interface-"Bluetooth Mouse" should appear there. Click "Connect" on your computer to complete pairing.

2.4GHz mode

2.4GHz Wireless Mode Connection

  1. Insert the receiver into the computer to install the driver
  2. Set the Power switch to "ON"
  3. Briefly press the mode button until the the red light is on. The mouse should work normally once driver installation is complete.

SAFETY INSTRUCTIONS

warning Read carefully and follow all instructions before using this product.

  1. Do not expose the mouse to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.
  2. Do not expose the mouse to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.
  3. The product shall be connected to the power supply source of the type indicated in the operation manual only.
  4. Clean the device with dry cloth only.

  1. It is forbidden to dismantle the device. Attempt to repair this device is not recommended and leads to voiding of the warranty.
  2. For optimum performance the device with batteries shall be kept at the temperature 15 to 25 °С. Too high / low temperature leads to reduction in capacity and service life of the battery. Excessive heating/cooling may cause temporary non-operability of the device.
  3. Do not destroy batteries by burning, they may explode.

Troubleshooting

Problem Solution
Mouse does not work
  1. Absence of signal from the transmitter installed in the USB port of the computer. Check the receiver, connecting it to another USB port.
  2. Remove the device from the system and install it again.

Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios http://canyon.eu

If the actions from the above list do not contribute to problem solving, please contact the support team at Canyon http://canyon.eu/ask-your-question/

WARRANTY

The warranty period starts from the day of the product purchase from Canyon authorized Seller. The date of purchase is the date specified on your sales receipt or on the invoice. During the warranty period, repair, replacement or refund for the purchase shall be performed at the discretion of Canyon. In order to obtain warranty service, the goods must be returned to the Seller at the place of purchase together with proof of purchase (receipt or bill of landing). 2 years warranty from the date of purchase by the consumer. Additional information about the use and warranty is available at https://canyon.eu/warranty-terms/

Date of manufacture: (see at the package). Made in China.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Canyon MW-9 - Dual Mode Wireless Mouse Manual

Advertisement

Need help?

Need help?

Do you have a question about the MW-9 and is the answer not in the manual?

Questions and answers

Table of Contents