Page 2
Quha Sento for Zono X with adjustable headband Quha Sento for Zono X with adjustable headband is a contactless puff switch that is used to perform a short mouse click (left- clicking) or a long mouse click (dragging) together with the Quha Zono X head mouse.
Page 3
Installation Quha Sento for Zono X with adjustable headband is delivered in two parts: the headband and the holder with the attached puff sensor arm. To assemble your Sento for Zono X, push the headband into the connector on the holder until it is fully inserted.
Page 4
Using Quha Sento for Zono X Place the puff switch on your head and adjust the headband so that it fits firmly and comfortably over your head. The magnetic holder is worn on the right side of the head with the flat end of the holder pointing directly forward.
Page 5
Keeping Quha Sento for Zono X Clean As a contactless puff switch, Quha Sento for Zono X is easy to keep clean. In the case of dust or saliva getting into the puff sensor, you can use a food safe cleaning spray that is suitable for electronics to clean the sensor piece.
Page 6
Safety This device contain magnets. Do not place it close to magnetically sensitive devices such as pacemakers, hearing devices, credit cards, mechanical watches, data storage media etc. as they may get damaged. Product Disposal When the device has reached its end-of-life it should be recycled as electric and electronic waste.
Page 8
Designed and manufactured in Finland by Quha. www.quha.com Copyright 2023 Quha oy. Quha, the Q-mark, Quha Zono X and Quha Sento are trademarks or registered trademarks of Quha oy.
Need help?
Do you have a question about the Sento for Zono X and is the answer not in the manual?
Questions and answers