Table of Contents
Advertisement
Quick Links
90mm FAP SERIES
COIL NAILER
OWNER'S MANUAL
Improper and unsafe use of this tool will result in death or serious injury. It is very
important that the intended operator of this tool reads and understands this manual
before operating this tool. Keep this manual available for others before they use the tool.
0508 782 753 |
Freephone
sales@delfast.com
Email
|
@DelfastNZ #Delfast
delfast.com
Advertisement
Table of Contents
Summary of Contents for Delfast FAP Series
- Page 1 90mm FAP SERIES COIL NAILER OWNER’S MANUAL Improper and unsafe use of this tool will result in death or serious injury. It is very important that the intended operator of this tool reads and understands this manual before operating this tool. Keep this manual available for others before they use the tool.
-
Page 2: Table Of Contents
Table of Contents 1-Year Limited Warranty Saftey instructions Specifications Technical Data Operation Air Supply and Connections Lubrication Fastener Loading Tool Operation Tool Operation Check Maintaining the Pneumatic Tool Driver Maintenance Instructions Trouble Shooting / Repairs Freephone. 0508 782 753 Email. sales@delfast.com... - Page 3 Product Overview Rafter Hook Depth of Drive Adjustment Air Supply Trigger Magazine delfast.com...
-
Page 4: 1-Year Limited Warranty
DELFAST and its authorized distributor may request the damaged tool, serial number of the damaged tool (as a gauge for the tool’s age) and photos/videos of the defect for test and evaluation to find root causes. DELFAST’s analyst will judge the issuance of defective parts and will replace at no charge if evaluation results show that the root cause is defect in material and/or workmanship. -
Page 5: Saftey Instructions
Some environments will require the use of head protection equipment. When required, the employer and user must ensure that head protection conforming to AS/ NZS1337. delfast.com... -
Page 6: Specifications
COLLATION 15° Wire or Plastic Coil OPERATING PRESSURE 70 to 120 PSI (5 to 8 kg/cm2). Select the operating pressure within this range for best fastener performance. DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE. Freephone. 0508 782 753 Email. sales@delfast.com... -
Page 7: Technical Data
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when using the tool. An influence to the hand-arm-system when using the tool will, for example, depend on the gripping force, the contact pressure force, the working direction, the adjustment of mains supply and the workpiece support delfast.com... -
Page 8: Operation
– or anything else – while the operator is holding the trigger pulled. WARNING! If trigger system is not operating as described, do not use the tool and contact your nearest service center. Freephone. 0508 782 753 Email. sales@delfast.com... -
Page 9: Air Supply And Connections
The filter has to be kept clean to be effective in providing clean compressed air to the tool. Consult the manufacturer’s instructions on proper maintenance of your filter. A dirty and/or clogged filter will cause a pressure drop which will reduce the tool’s performance. delfast.com... -
Page 10: Lubrication
The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the AS/ NZS1337, and provide both frontal and side protection. NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection. Freephone. 0508 782 753 Email. sales@delfast.com... -
Page 11: Tool Operation
BEFORE HANDLING OR OPERATING THIS TOOL: • READ AND UNDERSTAND THE WARNINGS CONTAINED IN THIS MANUAL. • REFER TO “TOOL SPECIFICATIONS” IN THIS MANUAL TO IDENTIFY THE OPERATING SYSTEM ON YOUR TOOL. delfast.com... -
Page 12: Tool Operation Check
Pull the trigger and press the contact trip against the work surface. THE TOOL MUST NOT CYCLE. • • With finger off the trigger, press the contact trip against the work surface. Pull the trigger. THE TOOL MUST CYCLE. Freephone. 0508 782 753 Email. sales@delfast.com... -
Page 13: Maintaining The Pneumatic Tool
Before evaluating tool problems for these symptoms, trace the air supply from the tool to the supply source for restrictive connectors, swivel fittings, low points containing water and anything else that would prevent full volume flow of air to the tool. delfast.com... -
Page 14: Driver Maintenance Instructions
When using optional flangeless driver, see adjustment below. Be sure to use proper preparation and installation. NEV-FAP90 Trouble Shooting/Repairs Please contact Delfast for any troubleshooting or repairs that need to be carried out. Freephone. 0508 782 753 Email. sales@delfast.com... - Page 15 delfast.com...
- Page 16 90MM FAP SERIES COIL NAILER OWNER’S MANUAL Improper and unsafe use of this tool will result in death or serious injury. It is very important that the intended operator of this tool reads and understands this manual before operating this tool. Keep this manual available for others before they use the tool.
Need help?
Do you have a question about the FAP Series and is the answer not in the manual?
Questions and answers