Cleaning And Maintenance - Cuisinart CPT-142 Series Instruction Booklet

Bagel button
The bagel feature adds extra time to the toasting cycle to allow for thicker
breads. You may also use the bagel button for English muffins and other thick
breads.
1. Insert slice(s) of bread or halved bagels.
Be sure that the carriage is in the up position.
2. Select browning control.
3. Press the carriage control lever until it locks into position.
4. Press the Bagel button to start. Blue LED indicates feature
is activated.
To stop cycle
When the bagel cycle is complete, the toaster will raise the bread. If you
wish to stop the cycle before it is finished, simply press the Cancel button
to interrupt. After use, unplug your toaster from the electrical outlet.
Defrost button
The Defrost button is designed to first defrost and then toast the bread, which
extends the toasting cycle slightly.
1. Insert slice(s) of bread.
Be sure that the carriage is in the up position.
2. Select browning control.
3. Press the carriage lever until it locks into the down position.
4. Press the Defrost button. LED indicates feature is activated.
To stop cycle
When the defrost cycle is complete, the toaster will raise the bread. If you
wish to stop the cycle before it is finished, simply press the Cancel button
to interrupt. After use, unplug the toaster from the electrical outlet.
Reheat button
The reheat feature allows you to reheat bread without browning or toasting.
1. Insert slice(s) of bread.
Be sure that the carriage is in the up position.
2. Press the carriage lever until it locks into the down position.
3. Press the Reheat button. LED indicates feature is activated.
To stop cycle
When the reheat cycle is complete, the toaster will raise the bread. If you
wish to stop the cycle before it is finished, simply press the Cancel button
to interrupt. After use, unplug your toaster from the electrical outlet.

CLEANING AND MAINTENANCE

Always allow the toaster to cool completely before cleaning.
1. Always unplug the toaster from the electrical outlet before cleaning.
2. Do not use abrasive cleansers. Simply wipe the exterior with a clean damp
cloth and dry thoroughly. Apply any cleansing agent to a cloth, not to the
toaster, before cleaning.
3. To remove crumbs, slide out the crumb tray and discard crumbs.
Wipe clean and replace. Never operate the toaster without the crumb tray in
place.
4. To remove any pieces of bread remaining in the toaster, turn the toaster
upside down and gently shake. Never insert any hard or sharp instruments
into the slot, as this could damage the toaster and cause a safety hazard.
5. Never wrap the cord around the outside of the toaster. Use the cord storage
cleats on the underside of the toaster.
6. Any other servicing should be performed by an authorized service
representative.
5