WURM DSP100-05 Product Information

Front view
Remote display for cold locations, display height 14mm

Features

Display of representative wares temperature of the associated field module

Status displays for cooling, defrosting and fan

Snap-in installation in refrigeration units

Connection to field module by 0.5m cable with prefabricated plug

Writing conventions
Symbol
WARNING

For your safety

For safe operation and to avoid personal injury and equipment damage through operator error, always
read these instructions, become familiar with the device, and follow all safety instructions on the
product and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG Elektronische
Systeme. Keep these instructions ready to hand for quick reference and pass them on with the device
if the product is sold.
Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in case of improper use or use for
other than the intended purpose.

Target group

Intended use

WARNING
Danger to life from electric shock and/or fire!
Connection of the device should be carried out only by a qualified electrician.

Use only the correct tools for all work.

Never expose the device to moisture, for example due to condensation or cleaning

agents.
Take the device out of operation if it is faulty or damaged and is therefore compromising

safe operation.
Do not open the device.

Do not repair the device yourself. If the device requires repairs, send it in with an exact

description of the fault.
DSP100-05_V1.1_PI_2021-01_EN
Meaning
Avoid the described hazard: otherwise there is danger from electric voltage
that could lead to death or serious physical injury.
These instructions are intended for "service technicians".
The DSP100-05 is a remote display for cold locations.
Subject to technical changes
DSP100-05
Product information
Page 1 of 2