ROSE DISPLAYS 18" Stacking Bin Assembly Instructions

Systems
18" Stacking Bins
A B
(3) Bottom Sides (6) Upper Sides
*Before beginning assembly, please locate and ID all parts listed for assembly
Start with the (3) bent tube
1
sides (shown). Insert the (2)
hook wire ends into the (2)
corresponding sleeves on the
adjacent side. * Repeat this
step to form the third side of
the bin. *Press together to be
sure the connection is secure.
Bottom Tier
(plastic caps)
© 2022 Visual Creations, inc. | Rose Displays drawings, images, renderings, representation, ideas, and disclosures
contained in this document are the exclusive property of Visual Creations, Inc. All rights reserved
500 Narragansett Park Drive Pawtucket, RI 02861 |
Parts Included
C
(3) Bin Floors
Insert the round wire bin
2
bottom into the assembled
bin, pushing it down until it
rests on the (3) loop wires.
www.rosedisplays.com | signware@rosedisplays.com
1-877-518-5156 |
D
(4) sku tag holder
3
B ulk Merchandising
Optional
E
Graphic wrap kit
Next, repeat the side
assembly using the sides
with the swedged tubing
(as s hown below). Press the
sides together to engage
firmly. *Be sure to assemble
the sides with the plastic caps
as a set (together they form
the top tier of the display).
swedged ends
P1