Tilt
Release the tilt retainer pin
•
Tilt the Tera using the handle on the
•
support or button on the control
panel
Water consumption
Adjust the valve on the water
•
coupling to regulate the water
consumption
Lifting
Lift the Tera using the two eyes on
•
top of the supports
Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • T +31 (0)88 20 20 600 • info@dehaco.nl • www.dehaco.nl
Setup
Unpack and check all parts
•
Position the Tera on a stable base
•
Connect a power supply
•
Connect a water supply
•
Close the drain points
•
Maintenance
Keep the Tera clean
•
Clean manually using fresh water
•
and a damp cloth. Do not use a
steam cleaner
Perform regular inspections and
•
replace any damaged parts as
required
Inspect and clean the water filter
•
as required
3
Use
Position the Tera in the required direction
•
Adjust the tilt to achieve the required distance
•
and height
Press the green button to start the Tera
•
When the fan and rotor turn at the correct
speed the water supply will be initiated
Press the red button to stop the Tera
•
The water supply will be discontinued first,
1
after which the fan and rotor will stop
Safety first
Always wear PPE
•
Check the area for hazards prior to working
•
Inspect and replace any damaged parts
•
Do not touch any moving parts
•
Quick tips
Consider the wind direction when positioning the Tera
•
Keep the length of the extension cable to a minimum
•
Use an extension cable with a suitable capacity
•
Keep the water hose and power cable tidy to reduce the
•
chances of tripping
Do not place the water hose and power cable on a route
•
where machinery is in operation
Always drain the Tera after each use to prevent damage and
•
bacteria growth
4
I
Please be sure to read the user
manual prior to using this machine.
EN
2