Options - Immergas MAGIS M4-30 Instructions Manual

If the TIMER or WEEKLY SCHEDULE is cancelled, the icon " " or "
INFORMATION
i
e TIMER/WEEKLY SCHEDULE must be restored if switching from the WATER FLOW TEMP. setting to ROOM
TEMP. or from the ROOM TEMP. setting to WATER FLOW TEMP.
TIMER or WEEKLY SCHEDULE are not valid if ROOM THERMOSTAT is on.
INFORMATION
i
• ECO MODE has the highest priority. TIMER or WEEKLY SCHEDULE have an intermediate priority and PRESET
TEMP. or WEATHER TEMP. SET have the lowest priority.
• PRESET TEMP. or WEATHER TEMP. SET are no longer valid when ECO mode is on. PRESET TEMP. or WEATHER
TEMP. SET must be restored when ECO mode is deactivated.
• TIMER or WEEKLY SCHEDULE are not valid when ECO mode is on. TIMER or WEEKLY SCHEDULE are activated
when ECO mode is not running.
• TIMER and WEEKLY SCHEDULE have the same priority.
SET TEMP. is no longer valid when TIMER or WEEKLY SCHEDULE are activated. TIMER o WEEKLY SCHEDULE
do not a ect WEATHER TEMP. SET.
• PRESET TEMP. and WEATHER TEMP. SET have the same priority.
applied.
INFORMATION
i
All items (PRESET TEMP., ECO, DISINFECT, DHW PUMP, TIMER, WEEKLY SCHEDULE, SILENT MODE, HOLI-
DAY HOME) can be scheduled by setting the relative function at ON/OFF from the start time to the end time.

6.5 OPTIONS.

e OPTIONS menu contains the following items:
1) SILENT MODE;
2) HOLIDAY AWAY;
3) HOLIDAY HOME ;
4) BACKUP HEATER.
6.5.1 Silent Mode.
SILENT MODE allows you reduce the noise level of the unit. However this also reduces the heating/cooling capacity of
the system.
Silent mode has two levels.
Level 2 is quieter than level 1 and also has a lower heating or cooling capacity.
ere are two ways to use the Silent mode:
1) Silent mode the whole time;
2) Silent mode based on timer.
• Go to the home page to check whether Silent mode is on. Otherwise "
" disappears from the home page.
7
e function with the most recent setting is applied. PRE-
e function with the most recent setting is
" appears on the home page.
33