Advertisement
Quick Links
Caution
Always wear safety goggles when cutting staples
•
Once the pin is in the stapler and the heat is applied, the staple will become extremely hot.
(100-200˚C). Do not touch without full protection
•
Do not use with wet hands
•
Do not soak product with water
•
Do not use in wet conditions
•
Turn off when unattended and make sure the tips are cold before leaving on any surface.
•
Do not use for any purpose other than that it is intended for.
•
Make sure all health and safety procedures are in place before commencing work.
The Tool Connection cannot be held responsible for any damage caused to property or
personnel when using this product.
Guarantee
If this product fails through faulty materials or workmanship, contact our
service department direct on: +44 (0) 1926 818186. Normal wear and tear are
excluded as are consumable items and abuse.
www.power-tec.co.uk
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk www.toolconnection.co.uk
92259_INSTRUCTIONS_V6.indd 1-2
Hot Stapler Plastic
Repair System
- Professional
Includes 2 pin plug
www.power-tec.co.uk
92259
14/02/2011 11:12
Advertisement
Summary of Contents for Power Tec 92259
- Page 1 92259 Caution Always wear safety goggles when cutting staples • Once the pin is in the stapler and the heat is applied, the staple will become extremely hot. Hot Stapler Plastic (100-200˚C). Do not touch without full protection • Do not use with wet hands Repair System •...
- Page 2 92259 Hot Stapler Plastic Repair System - Professional Temp Control Indicators (Red LED) Power Indicator Power Plug Power Cable Output Cable Fuse Temp Control Switch Grip Power Switch Instructions Switch Button 1. Plug in to standard 240v system. Press ON/OFF button to switch on (yellow LED).
Need help?
Do you have a question about the 92259 and is the answer not in the manual?
Questions and answers