Advertisement
SLDY347
No Wiring .... No electricity!
Solar Powered wall Light SLDY347
Product name:
Housing Material
Body Color
Solar Panel
Battery
Controller
LED Source
LED colors
Average operation time
Charging time
Working time
Temperature Range
Protection
www.senslights.com
Engineering plastics +PC
black
2 W high-efficiency Polycrystalline PV module
1 x 3.6V 2200mAh Ni-Mh batteries maintenance free
Intelligent controller:light/time intelligent control, waterproof, IP
44 guard level;various
protections,over charge and over-discharge protect function
4 pcs 0.5w LEDs high brightness LED
white
6-8 hrs/day
4 -5 hours
5-6hours,battery capacity providing 2-
3continuous cloudy or rainy days backup
-40 -- +50 Degree
IP44
1 / 4
Email:info@senslights.com
Advertisement
Table of Contents
Related Manuals for SensLights SLDY347
Summary of Contents for SensLights SLDY347
- Page 1 SLDY347 No Wiring …. No electricity! Solar Powered wall Light SLDY347 Product name: Housing Material Engineering plastics +PC Body Color black Solar Panel 2 W high-efficiency Polycrystalline PV module Battery 1 x 3.6V 2200mAh Ni-Mh batteries maintenance free Intelligent controller:light/time intelligent control, waterproof, IP Controller 44 guard level;various...
- Page 2 SLDY347 No Wiring …. No electricity! Location of the Solar Light 1) The solar light must be located in a position where it can get direct sunlight on the solar panel, and generally free from cover and shade. When locating a suitable position for the unit, remember that it detects an area of about 45-50 degrees vertically and about 90-120 degrees horizontally, with a range of over 5 meters.
- Page 3 SLDY347 Operation 1) Turn the button to the “LOW/HIGH” position so that the batteries can fully charge before use. 2) After the initial 2-day charging period, your solar lights are ready for use. Your light will now function automatically. Replacing the Batteries 1) Take off the 4 screws with screwdriver and replace the old Ni-Mh batteries.
- Page 4 SLDY347 Trouble Shooting If your solar light does not come on at dusk despite observance of all the instructions, please try the following steps: Make sure that the solar light is not being affected by any other light source. Ensure the solar light does not stand in the shade during the day.
Need help?
Do you have a question about the SLDY347 and is the answer not in the manual?
Questions and answers