Advertisement
Battery
Replacement
• For longer life, use alkaline batteries.
• Open the fasteners on the back of the
toy to access the battery compartment.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove it. Remove
the batteries and properly dispose
of them.
• Insert three, new AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• Close the fasteners on the toy.
• If the toy begins to operate erratically
you may need to reset the electronics.
Slide the power/volume switch on the
back of the toy off and then back on.
• When lights and sounds become
faint or stop, it's time for an adult to
change the batteries.
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local authority
for recycling advice
and facilities.
Battery Safety
Information
1,5V x 3
AA (LR6)
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Advertisement
