Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Use only QMobile Charger & Battery. Note: The actual operation time of a battery varies based on the operation mode, network strength in...
3. Functions Phone book Blacklist phonebook-Options-Add blacklist to avoid the call from this contact. Caller Groups Phonebook-Options-Caller groups-Add new group to create a new caller group. You can set 5 caller groups in this phone Messaging Send out SMS Messaging-Write message-Options-Send to-Add from...
message. MMS setting Messaging-Message settings-Multimedia message-Profiles, please choose the right profile to match your SIM card Call center Call history Go to Call center-Call history, you can check all call history here including Dialed calls, Received calls and Missed calls. Call settings Go to Call center-Call settings, you can do some useful settings here, please check each...
Audio player Please make sure the songs are stored in “My Music” folder so that the Audio player can recognize. You should also check whether default storage is phone or MMC. Go to Audio player-Options-Settings-Player settings-Pre. Playlist (Memory card) & press OK. When playing the songs, you can press Up navigation key to increase the volume and Down key to turn down.
Page 8
Camera Description of Mobile Phone Options: Options Description Photos To view the saved photos. Shutter Sound: sound 1, sound 2, sound 3,off EV: EV-2 ——EV+2. Contrast: High, Medium, Low. Camera Settings Anti-flicker: 50Hz(default), 60Hz. Delay Time: 5s, 10s, 15s or Off. OFFoffoffOff.
Manual input: You can edit the specified radio frequency band. The frequency of the radio is between 87.5mHz and 108.0mHz. Auto Search: You can have automatic search and save the searched channels into the list. Settings: You can set background play, loud speaker, record format, audio quality and record storage.
Page 10
Lock: You can set SIM lock (PIN code) as on/off. When this option is chosen, it is necessary to input PIN code for every insert of the SIM card. Change Password: You can change the defaulted phone by referring to the service provider.
back desk will consume more power. It is recommended to close this function when it is idle. Restore Factory Settings Go to Settings-Restore the factory settings. You can restore the factory settings of the mobile phone by pressing password 1122. User profiles Go to Settings-User profiles, there 6 profiles as below: General, Meeting, Outdoor, Indoor,...
Page 12
The SIM card is dirty. Clean it. SIM failed Reinstall the SIM card. card damaged. Replace it. Check the signal strength icon on the screen. If the icon contains 4 bars, it indicates the Poor signals signal is the strongest; if below 1 bars, it indicates the signal is very poor.
Page 13
battery discharge too much; so it cannot be charged Unable to charge until it is connected for the battery certain time. performance worsened. Too weak signals or strong interference. card installed Unable properly? Bad contact or register to the SIM card damaged? If network the SIM card is broken, please...
Need help?
Do you have a question about the E500 and is the answer not in the manual?
Questions and answers