Download Print this page

Apexera A'PEXi S-AFCII Wiring Diagram

Super air flow converter

Advertisement

Quick Links

SUPER AIR FLOW CONVERTER
SUPER AIR FLOW CONVERTER
WIRING DIAGRAM BY MODEL
WIRING DIAGRAM BY MODEL
This document describes car models to which the Super Airflow
This document describes car models to which the Super Airflow
Converter (Product code: 401-A911/401-A913) is applicable, and
Converter (Product code: 401-A911/401-A913) is applicable, and
ECU
ECU terminal arrangement drawings.
terminal arrangement drawings. For the
and precautions for the Super Airflow Converter, refer to the
and precautions for the Super Airflow Converter, refer to the
Instruction Manual . .
Instruction Manual
When installing the Super Airflow Converter, both this document
When installing the Super Airflow Converter, both this document
and the Instruction Manual are required.
and the Instruction Manual are required.
Even if the car model and manufacturing year coincide with the
Even if the car model and manufacturing year coincide with the
contents described in this document, this product may not be
contents described in this document, this product may not be
installed in certain specification vehicles or remodeled vehicles.
installed in certain specification vehicles or remodeled vehicles.
The manufacturing years of applicable vehicles are as of January,
The manufacturing years of applicable vehicles are as of January,
2005. For the
2005. For the latest vehicles applications, Please contact your
latest vehicles applications, Please contact your
local APEXERA Office or dealer for more information.
local APEXERA Office or dealer for more information.
SUPER 
SUPER 
 AIRFLOW C
 AIR
FLOW CONV
SUPER 
SUPER 
 AIRF LOW
 AIRF
LOW
CONVERTER 
CONVERTER 
For the operating method
ONVERT
ERTER 
ER 
operating method
1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the A'PEXi S-AFCII and is the answer not in the manual?

Questions and answers

Summary of Contents for Apexera A'PEXi S-AFCII

  • Page 1 The manufacturing years of applicable vehicles are as of January, 2005. For the 2005. For the latest vehicles applications, Please contact your latest vehicles applications, Please contact your local APEXERA Office or dealer for more information. local APEXERA Office or dealer for more information.
  • Page 2 ■ ■ Contents Contents ■ ■ Introduction Introduction _________________________________________________ _________________________________________________ P3 ■ ■ Precaution on Installation Precaution on Installation ___________________________________ ___________________________________ P4 ■ ■ Installation Installation __________________________________________________ __________________________________________________ P6 ■ ■ ECU Arrangement Diagram ECU Arrangement Diagram __________________________________ __________________________________ P12 ■...
  • Page 3 ■ ■ Contents Contents ■ ■ Introduction Introduction _________________________________________________ _________________________________________________ P3 ■ ■ Precaution on Installation Precaution on Installation ___________________________________ ___________________________________ P4 ■ ■ Installation Installation __________________________________________________ __________________________________________________ P6 ■ ■ ECU Arrangement Diagram ECU Arrangement Diagram __________________________________ __________________________________ P12 ■...
  • Page 4 ■ ■ Introduction Introduction “Safety precautions” are described in “Safety precautions” are described in the Instruction Manual. the Instruction Manual. Please read them before starting installation work. Please read them before starting installation work. “Signal words and their meanings” are described in the “Signal words and their meanings”...
  • Page 5 ■ Precautions for Installation ● When installing this product, do not use any electro-taps Using the electro-tap makes the electrical co ntact status unstable. This contact defect may cause a malfunction in the product and damage this product and the vehicle. Be sure to use the attached splice and dedicated tools such as cutting pliers for electric work to install this product securely and properly.
  • Page 6 Connect the ground conductor by referring to the following figure. Installing the ground conductor in a different way from the connecting method specified by APEXERA will give damage to this product and the mounted car engine. Correct Connecting Method for the Ground Conductor Connect the ground conductor to two positions of the same line.
  • Page 7 ■ Installation ● Connecting the SAFC II 1.Remove the negative ( ー ) terminal of the battery advice! There is some setting data on car audio, car navigation, etc. that is backed up by the battery power supply. We recommend you to take a note of the data in case it is lost. !...
  • Page 8 ■ Installation (cont.) ! CAUTION ● Be sure to connect the black wire and the brown wire of the harness attached to the SAFC II to the ground wire. Failure to do so may cause this product not to function properly, thereby causing damage to the product and the engine.
  • Page 9 ■ ■ Installation (cont.) Installation (cont.) ● ● Wire connecting method Wire connecting method ※ ※ For vehicles using a hot wire/flap/pressure sensor  For vehicles using a hot wire/flap/pressure sensor  Vehicle harness Vehicle harness ! ! CAUTION CAUTION ● ● Be sure to connect the brown wire to the ECU side. Be sure to connect the brown wire to the ECU side.
  • Page 10 ■ ■ Installation (cont.) Installation (cont.) ※ ※ For vehicles using the Karman type frequency sensor  For vehicles using the Karman type frequency sensor  Vehicle harness Vehicle harness Red wire (power supply) Red wire (power supply) Green wire (rpm signal) Green wire (rpm signal) Purple wire (knocking signal) Purple wire (knocking signal)
  • Page 11 ● ● Check points after Check points after installation installation. .  After installing the SUPER AFC  After installing the SUPER AFC II, check the following items once again II, check the following items once again ・ ・ Check if the harness attached to the SAFC II is Check if the harness attached to the SAFC II is securely connected securely connected ・...
  • Page 12 ■ Installation (cont.) ※ For vehicles equipped with multiple knocking signal wires Connect only the power wire, ground wire, engine rpm signal wire, and throttle signal wire and proceed to the following operations. For connecting the knocking signal wire, perform this work separately according to the following procedure Connect the power wire, ground wire, engine rpm signal wire, and throttle signal wire Page 6 in this document...
  • Page 13 ■ ECU Arrangement Diagram ● Perform installation by referring to the symbols in the corresponding columns of the tables of applicable models on and after page 14  A  A  : Lower part of the passenger seat dash side B  : Right side of the glove box C  : Foot position of the passenger seat D  : Inner part of the glove box E  : Inner part of the center console...
  • Page 14 ● If any abnormal noise or abnormal smell is sensed during the installation work of this product, stop the work immediately and contact the distributor or your nearest APEXERA business office Continuing the installation under such conditions may cause an electric shock or fire...
  • Page 15 ■ Table of Applicable Models ( TOYOTA ) Explanation of sensor type indication HW-HotWire FL-Flap Example PR-3 PR-Pressure KR-Karman Sensor type Sensor number  Manufacturing Terminal Sensor Car Name Car Model Engine Model Remarks year  Position Drawing Type ’97.7 ‘00.7 T10-e HW-13 UCF2# ‘94.10...
  • Page 16 Manufacturing Terminal Sensor Car Name Car Model Engine Model Remarks year  Position Drawing Type ‘89.1 ‘91.4 T5-b SOARER GZ20 1G-GE PR-3 ‘86.1 ‘88.12 T2-d ‘97.8 ‘02.8 T10-c HW-13 2JZ-GTE JZA80 PR-1 ‘93.5 ‘97.7 T7-c 2JZ-GE PR-3 ‘90.8 ‘93.4 JZA70 1JZ-GTE T6-a PR-1 T...
  • Page 17 Manufacturing Terminal Sensor Car Name Car Model Engine Model Remarks year  Position Drawing Type ‘93.10 ‘99.10 PR-2 T5-c ‘91.12 ‘93.9 3S-GTE FL-2 ‘89.10 ‘91.11 T5-b ‘97.12 ‘99.10 SW20 T9-b HW-13 ‘93.10 ‘97.11 T6-b 3S-GE ‘91.12 ‘93.9 T5-c PR-3 ‘89.10 ‘91.11 T5-b ‘86.8 ‘89.9...
  • Page 18 Manufacturing Terminal Sensor Car Name Car Model Engine Model Remarks year  Position Drawing Type ‘93.10 ‘98.12 3S-GE T6-b T4-f  ‘96.6 ‘98.12  A/T T5-g T4-a CARINA ED ST203 PR-3 CORONA EXIV ST202 ‘95.8 ‘96.5 3S-FE With A/T TRC T6-b Without A/T TRC T5-c With TRC T6-b...
  • Page 19 Manufacturing Terminal Sensor Car Name Car Model Engine Model Remarks year  Position Drawing Type ‘97.4 ‘00.9 4A-GE T5-b  AE111 ‘95.5 ‘97.3 4A-FE PR-3 ‘95.5 ‘00.9 T4-b  AE110 5A-FE 4A-GE FL-4 CAROLLA  A/T T5-b SPRINTER ‘91.6 ‘95.4  AE101 T4-b 4A-FE  A/T T5-c PR-3 ‘89.5...
  • Page 20 Manufacturing Terminal Sensor Car Name Car Model Engine Model Remarks year  Position Drawing Type T4-d ‘96.1 ‘99.7 4E-FTE PR-1  A/T T4-c EP91 ‘96.1 ‘97.12 4E-FE T3-b PR-3 ‘89.12 ‘95.12 T3-a STARLET ‘92.1 ‘95.12 4E-FTE T4-b PR-1 EP82  A/T ‘89.12 ‘91.12 T3-a ‘89.12 ‘95.12...