Summary of Contents for FLACO FLACOblue60
- Page 1 FLACO Tank Technology Initial operation / troubleshooting of FLACOblue60 • Erection / de-aeration • Configuration / diagnosis • Servicing www.flaco.de...
- Page 2 − Fill canister, use BOOST modus to speed up filling − If ECU stops filling, connect CDS adapter to device canister − Place A-adapter between nozzle and canister − De-aerate system − System is ready for use now! − www.flaco.de...
- Page 3 Configuration / diagnosis MENU AND SUB-MENU Switch on the FLACOblue60 Press button “2” (RESET) until the password entry window appears Enter the password Press button “2” (Reset) to jump to the next option Press button “+” (3, BOOST) or “-“ (4, Func.) to change configuration www.flaco.de...
- Page 4 “234432” menu Language English Unit Voltage actual battery voltage Ring sensor “o”= open, “x”= close Quad sensor “o”= open, “x”= close Pulse input “o”= open, “x”= close Check ring sensor and trigger Press A-Adapter into the nozzle, pull trigger www.flaco.de...
- Page 5 Customer configuration and diagnosis password “234432” menu Language English Unit Voltage actual battery voltage Ring sensor “o”= open, “x”= close Quad sensor “o”= open, “x”= close Pulse input “o”= open, “x”= close Check Quad sensor Shorting two adjoining points www.flaco.de...
- Page 6 Flow rate 3,5 l/min Boost refuel 6,5 l/min Refueling Refill / Bleeding Configuration menu (only internal use) password “223344” Tankgröße 60 l Abschaltzeit 5 min Blinkfrequenz 1.5 Hz Impulswert XXX I/l (according to calibration) Automatik Differenz 1,0 l/n Eichen www.flaco.de...
- Page 7 Configuration / diagnosis Wiring www.flaco.de...
- Page 8 Thank you for your attention! www.flaco.de...